Your cart is empty!
Tipped with a silicone squeegee, this 27ga capsule polisher sweeps residual cortex and lens epithelial cells from the posterior capsule without abrasive contact. The fine gauge allows passage through a side‑port incision, and the soft polymer surface follows the capsular curve for atraumatic cleanup.
Features & Benefits
A 23ga irrigating cystotome with a formed tip on a 5/8 inch shaft, this disposable scores and tears the anterior capsule while balanced salt solution maintains chamber depth. The pre‑formed bend presents the cutting edge to the capsule at a consistent angle, supporting reproducible tear initiation. The 23ga lumen sustains steady flow throughout capsulotomy.
Flexible polypropylene construction lets this iris retractor pass through a paracentesis incision and engage the pupil margin for intraoperative dilation during cataract or anterior segment work. A silicone stopper slides along the shaft to fine‑tune pupil expansion case by case. Each sterile pack contains five retractors, with six packs per box for high‑volume rotations.
Designed for corneal stromal puncture in recurrent erosion treatment, this 25ga needle on a 1 inch shaft creates micro‑perforations through the basement membrane to promote durable epithelial adhesion. The fine gauge produces controlled punctures without disrupting surrounding stroma. Single‑use packaging keeps the tip sharp for each treatment.
A 27ga lumen and 5mm bend‑to‑tip define this anterior chamber cannula, placing the outlet just beyond the wound for short‑reach irrigation and viscoelastic placement. The fine gauge preserves a low‑turbulence stream during careful chamber work.
This 27ga anterior chamber cannula offers a 9mm bend for moderate‑depth irrigation and viscoelastic placement under clear‑corneal incisions. The fine lumen produces low‑turbulence flow well suited to chamber maintenance during phaco or IOL work. The slender shaft preserves wound architecture during repeated entries.
This 1mm angled sideport knife creates the small secondary paracentesis used for second‑instrument access during cataract surgery. The narrow blade produces a tight self‑sealing wound just wide enough for a chopper or hook, preserving chamber stability while a second tool enters. Individually sterile packaging with six per box.
A formed 25ga cutting tip on this irrigating cystotome initiates the anterior capsulotomy while the through‑lumen delivers balanced irrigation to maintain chamber depth. The 16mm working length fits standard phaco approaches, and the pre‑shaped tip provides a consistent cutting angle for predictable capsular flap starts.
Angled at 55 degrees on a 25ga, 5/8 inch shaft, this irrigating cystotome offers an aggressive bend for capsular access through tighter corneal incisions. The 55 degree tip presents the cystotome sharply against the anterior capsule, helping initiate and direct the tear during cataract preparation. The intermediate gauge maintains chamber depth via balanced salt solution flow.
Atkinson's 23ga retrobulbar needle delivers anesthetic to the muscle cone with a 1‑1/2" trajectory and a tip profile tuned for atraumatic passage. The intermediate gauge balances flow with structural rigidity, giving the operator a stable directional track during block placement.
The Chang hydrodissection cannula uses a 27ga shaft to deliver a focused fluid wave between the anterior capsule and lens cortex. The fine gauge concentrates the stream at the cortex‑capsule interface, helping the surgeon mobilize the nucleus efficiently during phacoemulsification.
An Atkinson peribulbar needle in 25ga with a 7/8 inch shaft, this disposable supports shallow peribulbar anesthetic placement with a finer gauge than the 23ga model. The rounded bevel geometry limits vascular trauma while maintaining controlled tactile feedback. The shorter shaft suits anterior orbital work.
This 27ga anterior chamber cannula features a 7mm bend‑to‑tip, placing the irrigation outlet near the mid‑chamber for general fluidics work during cataract surgery. The fine gauge maintains low‑turbulence flow, and the moderate bend supports a clean approach beneath the corneal incision.
Formed at a 27ga lumen, this irrigating cystotome combines a pre‑shaped cutting tip with a through‑lumen for simultaneous capsulotomy initiation and balanced irrigation. The 16mm working length suits standard phaco incisions, and the formed tip provides a defined cutting angle for consistent capsular flap starts.
A 30ga lumen with a 9mm bend‑to‑tip equips this anterior chamber cannula for fine fluid delivery deeper into the chamber. The longer bend reaches toward the angle and behind the iris while preserving the gentle flow characteristics of the micro‑gauge.
These universal clear plastic eye shields carry eight ventilation holes for postoperative protection of the operative eye, allowing air circulation while shielding the surface from incidental contact. The 100‑per‑package format supports clinic and hospital inventory.
The 8mm short trephine cuts small to mid-sized tissue specimens and creates precise anterior chamber apertures. Single-use design eliminates the sharpness variability of multi-cycle instruments, ensuring consistent graft margins and smooth epithelial transitions. Pre-sterilized pouch packaging supports rapid surgical deployment.
Designed by Atkinson for retrobulbar block placement, this 25ga needle reaches the muscle cone through a 1‑1/2" trajectory while maintaining stable directional control. The fine gauge supports a smooth tissue track, and the tip profile is tuned for controlled deposition of anesthetic.
The 0.5mm Algerbrush II replacement burr is sized for atraumatic removal of superficial corneal foreign bodies and rust rings. Each burr is delivered individually sterile within a five‑per‑box configuration, supporting clean case turnover in clinic or OR settings.
Angled at 15 degrees with a 3mm blade and a blue screw‑in tip, this micro knife creates side‑port and paracentesis incisions for cataract and anterior segment work. Single‑use sterile delivery preserves the sharp cutting edge, and the screw‑in format gives a secure connection to the included handle.
Built for phacoemulsification entry, this angled 2.85mm slit knife features a beveled‑up blade on a full round‑stock steel handle. The geometry produces a clean self‑sealing keratome incision sized for standard phaco tips, while the round handle profile supports balanced fingertip rotation during entry. Sold individually sterile with six per box.
This micro J‑shape cannula delivers a 25ga lumen on a slender J hook measuring 85 × 1.7mm, narrow enough to slip through tight side ports yet long enough to reach across the chamber. The hooked tip directs irrigation behind the iris or under the iris plane during cataract work. The low‑profile shaft preserves wound integrity.
Built around a 27ga lumen with a 4mm bend‑to‑tip, this anterior chamber cannula supports short‑reach irrigation and wound hydration just beyond the corneal incision. The fine gauge preserves low‑turbulence flow during routine fluidics tasks at the close of cataract surgery.
Carrying a 30ga lumen with a short 4mm bend‑to‑tip, this anterior chamber cannula is sized for delicate, near‑incision fluid delivery. The micro‑gauge minimizes turbulence around the corneal endothelium during careful chamber adjustment or wound hydration.
With an 8mm bend‑to‑tip on a 27ga shaft, this anterior chamber cannula extends reach across the chamber for irrigation and viscoelastic management. The fine gauge keeps flow gentle around the iris and endothelium during extended manipulation beneath the corneal incision.
With a 19ga lumen and a 10mm bend‑to‑tip, this anterior chamber cannula combines high‑flow capability with extended intraocular reach. The larger gauge supports rapid chamber reformation or robust viscoelastic delivery, and the longer bend gives the outlet a deeper trajectory toward the angle.
The reusable blue bipolar cord pairs an angled instrument end with two banana pins at the machine end, fitting bipolar forceps to compatible generators with mechanical retention at both interfaces. The angled instrument connection clears the operative line from the cord drape.
This low‑turbulence phaco needle, angled 30 degrees, delivers controlled emulsification during cataract removal. The 20‑gauge stainless‑steel design with fine orifice geometry minimizes anterior chamber trauma. Sterile disposable format with integrated infusion sleeve supports consistent per‑case performance.
Suited for clear corneal tunnel dissection, this 2mm angled crescent blade carries a beveled‑up edge for graded lamellar work. The crescent geometry tunnels through the cornea in a controlled plane ahead of phaco entry, while the angled shaft preserves the surgeon's view of the cutting tip. Sold individually sterile with six per box.
This Sub‑Tenon anesthesia cannula with beveled‑down tip is designed for safe posterior sub‑Tenon anesthetic placement during ophthalmic surgical anesthesia. The 25 gauge curved design with 13mm length allows gentle atraumatic advancement while the beveled tip enhances precision and reduces scleral irritation. Sterile single‑use delivery maintains case‑to‑case consistency in anesthetic coverage.