Reusable Cannulas

Rycroft air injection cannulas deliver controlled boluses of air or fluid into the anterior chamber through a 30 gauge tip angled 45 degrees, with 5mm from bend to tip. The short angled shaft directs flow under the iris or against the corneal endothelium during DSAEK bubble formation and chamber reformation. A standard luer hub mounts to most ophthalmic syringes.

Features & Benefits

• 30 gauge tip injects air or fluid into the anterior chamber
• Shaft angled 45 degrees with 5mm bend‑to‑tip working length
• Directs flow for DSAEK bubble or chamber reformation
• Luer hub fits standard ophthalmic syringes

This 27‑gauge air injection cannula is angled 45 degrees with a 7mm tip‑to‑bend distance, sized for anterior chamber air injection in DSAEK and other endothelial keratoplasty steps. The polished finish keeps the slender shaft visible against the iris under microscope view, and the 20mm working length excluding hub passes cleanly through a small paracentesis.

Features & Benefits

• 27‑gauge bore for fine anterior chamber air delivery
• 45‑degree bend with 7mm tip‑to‑bend distance
• Polished finish keeps the shaft visible under microscope
• 20mm working length passes through a small paracentesis

This Delrin infusion handle bridges male‑to‑female fluidic connections during anterior segment irrigation. The polymer body insulates the surgeon's hand from instrument cooling and keeps the assembly light at 95mm overall, supporting steady fingertip control through long phaco runs. Delrin's chemical resistance suits repeated exposure to BSS and standard reprocessing.

Features & Benefits

• Male‑to‑female connector bridges irrigation tubing
• Delrin body insulates hand from instrument cooling
• 95mm length supports steady fingertip control
• Polymer construction resists BSS and reprocessing chemistry

This curved lacrimal cannula offers a finer gauge alternative for delicate nasolacrimal duct pathology. The 25ga tubing reduces turbulent flow during micro-volume irrigation, while the standard curve and 10mm working tip support atraumatic advancement through partially obstructed ducts. Reinforced 19ga shaft maintains control during gentle dilation.

Features & Benefits

• 25ga fine lumen reduces high-pressure jetting
• Standard curve conforms to duct anatomy
• 10mm working length targets nasolacrimal valve
• 19ga reinforcement prevents shaft collapse during advancement

Bent 45 degrees with 5mm from bend to tip, this 27‑gauge Rycroft air injection cannula delivers controlled bolus into the anterior chamber or beneath tissue planes during ophthalmic procedures. The angle preserves the surgeon's visual axis through the wound, and the 37mm overall length keeps the hub clear of the microscope.

Features & Benefits

• 27‑gauge bore supports controlled air or fluid delivery
• 45‑degree angle preserves the visual axis
• 5mm bend‑to‑tip suits anterior chamber entry
• 37mm overall length keeps the hub clear

This air injection cannula 30ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 30ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 10mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This hydrodissection cannula features a 30ga flat tip with an 8mm tip‑to‑bend geometry and a 20mm overall length for gentle, low‑resistance hydrodissection in shallow working spaces.

Features & Benefits

• 30ga flat tip provides gentle fluid release
• 8mm tip‑to‑bend supports controlled wave initiation
• Compact 20mm profile enhances fine access
• Ideal for low‑resistance hydrodissection
• Precision configuration uniquely matched to 11‑8‑6165‑30

This Chang hydrodissection cannula incorporates a 27ga 90‑degree angle with a flat beveled tip and a standard short 1.5mm tip length for controlled hydrodissection wave initiation.

Features & Benefits

• 27ga 90‑degree angle supports perpendicular entry
• Flat beveled tip enhances controlled fluid direction
• 1.5mm standard short tip supports precise wave initiation
• Designed for refined hydrodissection maneuvers

This stainless‑steel infusion handle features a male‑to‑tubing connector with a compact 75mm length for improved maneuverability.

Features & Benefits

• Compact 75mm length enhances maneuverability
• Stainless steel body maintains stability
• Male‑to‑tubing connector ensures compatibility
• Suitable for small‑workspace infusion setups

Gills-Welsh cannula is designed for controlled irrigating and aspirating fluid management in the anterior chamber during phacoemulsification and other anterior segment procedures. The 25ga needle gauge allows smooth entry through minimal incisions, while the 45-degree angled geometry positions the port optimally for fluid direction. Polished finish supports clean handling and repeated reuse.

Features & Benefits

• 25ga fine gauge for minimal incision trauma
• 45-degree angled shaft for anterior chamber navigation
• 5mm tip‑to‑bend provides controlled depth
• Polished finish enables clean intraoperative handling

This viscoelastic aspirating cannula features a 19ga angled shaft with a 10mm bend‑to‑tip distance, supporting controlled aspiration of viscoelastic material. The compact working length optimizes maneuverability.

Features & Benefits

• 19ga angled shaft improves access to confined spaces
• 10mm bend‑to‑tip supports controlled aspiration angle
• Suitable for viscoelastic removal maneuvers
• Compact working length enhances precision
• Precision configuration uniquely matched to 11‑8‑4663

The Yalon hydrodissection cannula features a 45-degree angle and lateral irrigation port for efficient cortical hydrodissection during cataract surgery. Its angled geometry positions the surgeon naturally while the side port delivers fluid directly into the cortical-capsular plane without passing through the anterior chamber. The 25ga profile supports controlled flow.

Features & Benefits

• 45-degree angled shaft reduces surgeon fatigue
• Lateral irrigation port delivers fluid directly to cortical plane
• 25ga tubing provides balanced flow and control
• Eliminates anterior chamber turbulence from hydrodissection

The Kelman-Cystotome sharp 22 gauge knife enables precise anterior chamber incision for phacoemulsification cannula insertion. The polished finish supports smooth blade passage through corneal tissue while the straight geometry ensures consistent incision angle for optimal wound construction.

Features & Benefits

• Sharp 22 gauge enables precise chamber incision
• Polished finish supports smooth corneal tissue passage
• Straight geometry ensures consistent blade angle
• Reliable incision creation for phaco cannula insertion

The Bishop‑Harmon irrigating cannula at 19 gauge with a shaft angled 30 degrees and a 7mm bend‑to‑tip distance delivers irrigation into the anterior chamber during cataract and corneal surgery. The blunt tip and angled geometry preserve a clear approach beneath the corneal incision.

Features & Benefits

• 19‑gauge angled shaft for anterior chamber irrigation
• 30‑degree angle with 7mm bend‑to‑tip reach
• Blunt tip preserves a safe approach
• Suited to cataract and corneal surgery

This polished stainless‑steel adaptor joins irrigation bulbs to standard cannula hubs, bridging delivery sources and working cannulas across an ophthalmic setup. The 30mm body stays compact in the connection line, and the polished finish reduces drip retention at the joint.

Features & Benefits

• Adapts bulbs to standard cannula hubs
• Polished finish minimizes drip retention
• 30mm compact body fits inline
• Stainless‑steel build tolerates repeat sterilization

This air injection cannula 18ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 18ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 5mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This air injection cannula 19ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 19ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 5mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This air injection cannula 20ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 20ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 5mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This air injection cannula 21ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 21ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 5mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This air injection cannula 30ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 30ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 11mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This air injection cannula 30ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 30ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 12mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This air injection cannula 30ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 30ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 2mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This air injection cannula 30ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 30ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 6mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This air injection cannula 23ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 23ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 12mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This 23‑gauge air injection cannula delivers controlled anterior chamber air bubbles during cataract extraction, iris repair, and capsular support procedures. The angled 45‑degree shaft and 5mm tip‑to‑bend geometry allow precise bubble placement within the anterior chamber, while the blunt polished finish minimizes endothelial cell trauma. Compact 36mm usable length (excluding hub) supports controlled depth of insertion.

Features & Benefits

• 23‑gauge cannula for fine, controlled air delivery
• 45‑degree angle optimizes anterior chamber positioning
• Blunt polished tip minimizes corneal endothelium trauma
• 36mm working length enables predictable depth control

This air injection cannula 23ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 23ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 8mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This air injection cannula 25ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 25ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 12mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This air injection cannula 25ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 25ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 4mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability

This air injection cannula is configured with a 25‑gauge angled shaft at 45 degrees for controlled air bubble injection into the anterior chamber during keratoplasty and corneal surgery. The 5mm distance from tip to bend and polished finish facilitate smooth, atraumatic injection. A 36mm working length supports stable hand positioning during globe fixation.

Features & Benefits

• 25‑gauge angled 45‑degree shaft for anterior chamber air injection
• 5mm tip‑to‑bend distance optimizes angle and trajectory
• Polished finish enables smooth injection without tissue irritation
• 36mm length provides stable control during globe fixation

This air injection cannula 25ga with 45-degree angled shaft enables ergonomic access to the anterior chamber during ophthalmic procedures. The angled configuration supports controlled air injection for chamber reformation.

Features & Benefits

• 25ga gauge for precise anterior chamber access
• 45-degree angle supports ergonomic needle placement
• 8mm tip size accommodates varied approaches
• Enables surgeon‑controlled air injection for chamber stability