Your cart is empty!
Select a category below to browse instruments
Categories
Browse Instruments
Acetabular brush packs are designed to clean the hip acetabular surface prior to component seating during arthroplasty procedures. The stiff bristle configuration removes debris and blood from trabecular bone, preparing a clean implant bed. Pack of three brushes optimizes inventory for multi-patient OR schedules.
Features & Benefits
This white nylon cleaning brush with 9Fr tube bore supports post‑procedure instrument lumen decontamination without fiber shedding. The included two‑brush set provides redundant cleaning tools for efficient throughput. The 450mm length accommodates full‑length instrument lumens.
These clear instrument guards ship in assorted sizes, 100 per package, to cover a mixed tray of fine and standard instrument tips. Transparent walls let staff confirm tip seating before sterilization. The assorted format suits central‑sterile departments handling diverse instrument inventories.
These disposable monopolar cords connect electrosurgical instruments to the ESU unit with a straight connector geometry. The 10-per-box packaging supports case-to-case inventory management. Single-use sterile configuration eliminates reprocessing burden while ensuring infection control compliance.
This seamless stainless‑steel dressing jar with slip‑over cover provides protected storage for surgical dressings and cotton supplies. The 1‑7/8 quart capacity accommodates bulk dressing inventory, while the recessed lid handle supports safe lifting and transfer. The seamless construction prevents debris accumulation and facilitates thorough sterilization.
This four-quart dressing jar features a slip-over cover and seamless design that supports efficient sterilization and storage of wound dressings in the OR suite. The recessed handle design minimizes snagging during transport, while the generous 171 × 216mm interior accommodates standard dressing packs. The design reduces contamination risk during field transfers.
This 26‑ounce emesis basin uses a seamless stainless‑steel pull to eliminate crevices that would trap fluids or contaminants. Kidney‑shaped at 251mm × 114mm × 54mm, it conforms to the patient's jawline or neck for fluid capture. The smooth interior cleans quickly between cases.
This 50-ounce emesis basin measures 305 × 140 × 61mm and features a seamless design for reliable fluid containment during surgical procedures and patient care. The generous capacity accommodates fluids and waste without frequent emptying, while the smooth surface enables easy cleaning. Durable stainless‑steel construction supports repeated use and sterilization.
These 1 × 1.9mm endoscope guards protect the slim distal segments of endoscopes during transport and sterilization, fitting over the scope tip without distorting the optical face. The guards preserve scope alignment and prevent contact damage between instruments in a tray.
This forceps jar is designed as a compact desk-side or instrument table container for organizing and storing forceps during case preparation. The seamless stainless-steel construction with 2 × 4.5-inch dimensions (50 × 114mm) fits standard instrument layouts without consuming excessive table space. Its small footprint supports efficient OR organization.
This 2 × 7‑1/2" forceps jar stores tissue and dressing forceps upright between cases, keeping the working tips elevated above the base for protection and consistent reach. The straight‑sided cylindrical form holds multiple instruments in parallel without crowding.
These instrument guards provide a 1/8 inch interior opening by 1 inch length, sized for broader instrument shafts and specialized equipment requiring intermediate protection. Reusable polymer construction withstands routine steam sterilization without degradation. Open-ended design allows rapid installation and removal during case setup.
These blue instrument guards measure 2.0 × 19mm and are designed to protect instrument edges and personnel hands during sterilization tray transport and setup. The non-vented design maintains fluid barrier integrity while providing solid protection. Supplied in quantities suitable for case-ready instrument set assembly.
Clear instrument guards measuring 1/15‑inch × 3/8‑inch × 1 protect sharp instrument tips and prevent unintentional tissue contact during surgical setup and field transitions. The transparent construction allows full visibility of the guarded instrument. Reusable design supports repeated sterilization.
Clear instrument guards at 7/64 × 3/4 inch offer transparent protection that allows continuous visual inspection of guarded instruments without removal. The inert plastic resists interaction with cleaning agents and sterilizing media. The compact size accommodates fine instruments while maintaining minimal profile during storage.
These green instrument guards measure 7/64 inch interior width by 3/4 inch length and protect instrument tips and shafts during storage and transport to prevent corrosion and cross-contamination. The molded polymer construction is reusable through multiple sterilization cycles and resists staining. Color-coded design supports rapid inventory organization and surgical case preparation.
Maroon instrument guards measuring 13/32 × 3/4 inch provide color‑coded protection for instrument identification and organization. The larger bore diameter accommodates thicker shafts while the tinted plastic resists staining and maintains durability across many reuse cycles. Quick‑slip installation supports efficient instrument setup.
Packaged 100 per box, these solid brown instrument guards protect delicate tips through cleaning, sterilization, and storage. Vented holes allow steam penetration during autoclaving without trapping moisture. The 2 × 15.9 × 25.4mm size fits fine‑tipped microsurgical and ophthalmic instruments.
These solid maroon vented instrument guards measure 10.3 × 19.1mm with vented holes and contain 100 units per package. The larger dimensions accommodate extended or specialty instruments while maintaining steam penetration through vented design. Maroon color provides visual distinction for specialized sets.
These black tinted instrument guards (1/8‑inch × 1‑inch × 1‑inch) combine opaque visibility control with vented holes that reduce fluid pooling during washdown and storage. The darkened surface filters reflected light in bright operative fields. Reusable plastic construction withstands routine sterilization.
Assorted tinted non‑vented instrument guards in one package provide mixed sizes for heterogeneous instrument sets. The package contains 100 total guards with varied sizes (16-3011, 16-3012, 16-3013, 16-3014, 16-3015 and others in specified proportions). The color and size mixing supports systematic organization and rapid identification.
Instrument guards in white, sized 1/16 × 3/4 inch, protect delicate instrument tips and shafts during storage and transport. The plastic construction resists corrosion and allows visual inspection of guarded instruments without removal. The slip‑fit design accommodates multiple instrument diameters while preventing tip damage.
At 140mm, the Medicut utility scissors in white provide compact cutting control ideal for confined surgical spaces or delicate tissue work. The straight profile maintains visibility while the white color coding helps prevent mix-ups with other instruments. Stainless-steel blades retain sharpness across extended case loads.
Built double‑sided with stainless steel bristles on a plastic handle, this cleaning brush extends the dual‑face design of the 7960 variant with a slightly different stainless bristle configuration for varied instrument surface cleaning during reprocessing.
Clear retractor guards at 50.8mm length shield instrument tips and blades during case breaks and between-case handling. The transparent thermoplastic allows visual confirmation of guard seating without removal. Bulk packing of 45 guards per bag supports high-volume OR inventory.
These clear vented instrument guards at 3 × 25 × 25mm protect cassette‑style instrument tips during transport and sterilization, with the vented holes allowing steam penetration during autoclave cycles. The clear material allows visual identification of the protected tip.
This vented MIS instrument guard accommodates minimally invasive surgical instruments with slender profiles. The 1.7 × 0.5 inch dimensions protect instrument tips while maintaining sterilization ventilation. Vented construction prevents condensation and promotes rapid drying.
This larger vented MIS instrument guard protects longer or slightly wider minimally invasive instruments. The 2.25 × 10mm aperture accommodates varied MIS tool geometries while maintaining sterilization ventilation. Durable polystyrene construction resists repeated use cycles.
This vented minimally invasive surgery instrument guard measures 10.2 × 10mm and is designed for fine endoscopic and laparoscopic instruments requiring compact protection. The vented design enables steam sterilization while maintaining edge integrity. Ideal for MIS-focused case carts and sterilization trays.
These blue‑tint vented osteotome guards at 1/4 × 3/4" protect osteotome cutting edges during transport and sterilization. The vented holes allow steam penetration during autoclave cycles, and the blue tint identifies osteotome guards from other instrument protectors.
Our sales specialists are available Monday through Friday, 9am to 5pm EST.