I/A Systems

Exceptional durability is combined with access to extreme chamber angles during complex anterior segment procedures in a titanium Binkhorst‑pattern I/A tip. The 150‑degree angle and 0.5mm port enable unconventional surgical approaches while titanium construction resists corrosion across repeated sterilization. The 45mm length provides stable reach.

Features & Benefits

• Binkhorst 150‑degree geometry accesses unusual chamber angles
• Titanium construction ensures lasting sterilization durability
• 0.5mm port maintains consistent irrigation control
• Superior corrosion resistance supports repeatable blade edge

This bi‑manual aspirating unit incorporates a curved 21ga capsule‑polishing cannula with a single 0.3mm port for controlled polishing access.

Features & Benefits

• 21ga capsule‑polishing tip improves access to equatorial cortex
• 0.3mm port offers controlled low‑flow aspiration
• Curved geometry enhances maneuverability
• Designed for precision capsule polishing

This bi‑manual aspirating unit uses a curved 21ga cannula with a single 0.3mm port and a gold titanium handpiece to support higher‑flow aspiration.

Features & Benefits

• 21ga cannula increases aspiration flow capacity
• 0.3mm single port supports controlled removal
• Curved profile enhances chamber access
• Gold titanium handpiece provides stability

This bi‑manual aspirating unit features a curved 21ga cannula with a single 0.4mm port to support increased aspiration flow through a gold titanium handpiece.

Features & Benefits

• 21ga cannula with 0.4mm port supports higher aspiration flow
• Curved shaft improves fine anterior chamber access
• Gold titanium handpiece improves grip and balance
• Suitable for bi‑manual cortical aspiration

This bi‑manual aspirating unit features a curved 23ga cannula with a single 0.3mm port and a gold titanium handpiece for controlled aspiration during bi‑manual lens removal.

Features & Benefits

• 23ga curved cannula supports fine aspiration control
• 0.3mm port provides steady cortical flow
• Gold titanium handle enhances instrument stability
• Suitable for bi‑manual anterior segment aspiration

This bi‑manual aspirating cannula tip is a 23ga curved design with a single 0.3mm aspiration port, engineered for selective cortical lens material removal in micro‑incision cataract surgery. The curved 21mm tip geometry conforms to anterior chamber anatomy while the fine gauge and single port permit responsive surgeon‑controlled aspiration flow. Reusable stainless‑steel construction supports extended MICS protocols.

Features & Benefits

• 23ga curved tip for micro‑incision insertion
• Single 0.3mm port enables responsive aspiration control
• 21mm working length supports anterior chamber access
• Stainless‑steel construction supports reliable reprocessing across cases

The bi-manual handpiece is a 21ga curved instrument with a 0.3mm single aspiration port designed for coordinated two-handed cataract and cortical manipulation. Its standard curve geometry aligns with anterior chamber anatomy while the fine aspiration port enables controlled cortical material removal without excessive chamber turbulence. The curved shaft maintains excellent visibility while supporting precise coordinated movements.

Features & Benefits

• 21ga gauge for minimal incision trauma
• 0.3mm single port provides controlled aspiration
• Standard curved geometry aligns with anterior chamber
• Gold finish indicates high surgical-grade durability

The bi-manual handpiece delivers coordinated irrigation-aspiration with one 21ga curved handpiece providing both 0.5mm dual-port irrigation and aspiration. The blue color-coded body ensures quick clinical identification, while the curved geometry supports ergonomic hand positioning during anterior chamber surgery. This design enables surgeons to manage fluid flow with one hand, preserving visibility and bimanual capability.

Features & Benefits

• 21ga curved shaft for ergonomic handling
• Dual 0.5mm ports for integrated I/A function
• Blue color coding for quick instrument identification
• 111mm length supports controlled chamber access

This bi‑manual handpiece is engineered for multi-function anterior segment surgery using 23ga micro‑incision techniques. The curved geometry accommodates diverse surgical angles, while the 0.3mm single‑port aspiration design with gold capsule-polisher coating enables efficient cortical cleanup without corneal decentration. The micro‑incision platform preserves anterior chamber anatomy and reduces postoperative astigmatism.

Features & Benefits

• 23ga curved handpiece for MICS phacoemulsification
• 0.3mm single aspiration port for precise cleanup
• Gold capsule-polisher coating for efficient cortical removal
• Micro‑incision design reduces postoperative impact

This 23ga curved bi‑manual handpiece features a single 0.3mm aspiration port and gold‑colored finish for surgeon‑controlled cortical aspiration during micro‑incision cataract surgery. The curved shaft conforms to anterior chamber anatomy while the fine gauge port delivers precise aspiration response. The handpiece design facilitates ergonomic bimanual manipulation of cortical material.

Features & Benefits

• 23ga gauge for excellent micro‑incision compatibility
• Single 0.3mm aspiration port for responsive flow control
• Curved shaft follows anterior chamber contours
• Gold finish aids instrument recognition in surgical field

This 23ga curved bi‑manual handpiece is configured for irrigation with a dual 0.4mm port design and blue color identification for hydrating the anterior chamber during phacoemulsification. The curved geometry accommodates micro‑incision access while the dual‑port irrigation design maintains anterior chamber stability throughout cortical removal phases. The blue coloration distinguishes it from aspiration handpieces.

Features & Benefits

• 23ga curved shaft for micro‑incision approach
• Dual 0.4mm irrigation ports maintain chamber stability
• Blue finish provides distinctive handpiece identification
• Smooth curved geometry supports prolonged irrigation

This bi‑manual handpiece delivers irrigating function with 23ga micro‑incision precision. The straight geometry and 0.4mm dual‑port irrigating design support balanced anterior chamber infusion during phacoemulsification and cortical aspiration. The blue color-coded system enables clear identification and handoff during multi-function MICS procedures.

Features & Benefits

• 23ga straight handpiece for MICS irrigation
• 0.4mm dual‑port irrigating design
• Blue color coding for clear function identification
• Supports balanced chamber infusion during phaco

This bi‑manual irrigating unit uses a blue titanium handpiece with a curved 21ga tip and dual 0.5mm ports for increased irrigation flow in bi‑manual anterior segment procedures.

Features & Benefits

• Curved 21ga tip increases volume capacity
• Dual 0.5mm ports support robust irrigation flow
• Titanium handle improves control during lens manipulation
• Suitable for bi‑manual chamber maintenance

This bi‑manual irrigating unit features a blue titanium handpiece and a curved 23ga tip with dual 0.3mm ports to support balanced sub‑incisional irrigation during lens manipulation.

Features & Benefits

• Curved 23ga tip provides controlled irrigation access
• Dual 0.3mm ports deliver balanced flow
• Titanium handpiece enhances tactile stability
• Designed for bi‑manual irrigation maneuvers

The DK aspiration handpiece provides the basic interface for cortex removal and final anterior chamber irrigation during phacoemulsification completion. Stainless steel construction and standard reusable format integrate seamlessly into existing phaco consoles. The straight geometry and comfortable grip support steady, controlled aspiration strokes during cortical cleanup and wound hydration.

Features & Benefits

• Direct connection to phaco console tubing
• Straight geometry for intuitive anterior chamber access
• Stainless steel construction supports repeated reprocessing
• Comfortable grip suits prolonged irrigation phases

Featuring a standard curved tip geometry, this DK I/A handpiece enhances reach into the posterior capsular region during the final phases of cortex removal and chamber cleanup. The curved approach angle reduces hand strain during extended cases while maintaining direct visibility of cortical material removal. Stainless steel reusable construction supports integration into high-volume sterilization protocols.

Features & Benefits

• Standard curve tip improves posterior capsule reach
• Reduces hand strain during extended irrigation phases
• Direct anterior chamber access without blind spots
• Stainless steel ensures durable repeated use

Featuring a straight configuration and 20‑gauge tube, this DK I/A screw‑in tip includes a 0.3mm aspiration port for precision fluid management during cataract surgery. The straight profile simplifies access to the anterior chamber, while the screw‑in coupling ensures positive engagement with I/A handpieces. Stainless‑steel construction provides durability across multiple sterilization cycles.

Features & Benefits

• 20ga straight tube for direct anterior chamber entry
• 0.3mm aspiration port enables controlled fluid withdrawal
• Screw‑in design prevents coupling separation during use
• Stainless‑steel durability supports repeated multi‑case workflow

This DK I/A tip is engineered with a 90‑degree curve and screw‑in design for integrated aspiration‑irrigation during cataract surgery. The 22‑gauge bore and 0.25mm port on the underside support balanced flow during lens cortex removal and chamber maintenance. The screw‑in coupling provides secure attachment to standard I/A handpieces without dead space.

Features & Benefits

• 90‑degree curved geometry for controlled anterior chamber access
• 22ga bore with 0.25mm underside port balances flow
• Screw‑in design secures reliable handpiece coupling
• Stainless‑steel construction withstands repeated sterilization cycles

Precise anterior chamber epithelial aspiration at unusual chamber angles and surgical field positions is enabled by a 150‑degree angled Binkhorst‑pattern I/A tip. The Binkhorst geometry creates an acute approach that accesses chamber recesses while the 0.5mm port sustains controlled aspiration flow. The 45mm length provides stable reach.

Features & Benefits

• Binkhorst 150‑degree geometry accesses extreme chamber angles
• 0.5mm port supports consistent aspiration flow
• Unique angle enables unconventional surgical approaches
• 45mm length provides stable chamber access

The Binkhorst 150‑degree angled titanium I/A tip is engineered for lateral approach during posterior chamber cleanup and advanced nucleus management in challenging cases. This extreme angle redirects instrument approach away from the visual axis, protecting corneal endothelium while accessing deep anterior chamber zones. Titanium construction and 0.3mm port deliver precision and lasting performance.

Features & Benefits

• 150‑degree angled approach for lateral anterior chamber access
• Binkhorst geometry protects corneal endothelium
• 0.3mm port enables precise posterior chamber aspiration
• Titanium construction ensures durability in complex cases

This Binkhorst‑style 150‑degree titanium I/A tip uses an obtuse angle and a 0.3mm port to address peripheral cortex and posterior capsule work in challenging cataract cases. The 150‑degree bend lets the surgeon sweep the capsular periphery without corneal impingement, and titanium construction maintains tip geometry across repeated sterilization.

Features & Benefits

• 150‑degree Binkhorst angle reaches peripheral capsular cortex
• 0.3mm port balances aspiration force with tissue protection
• 45mm length suits standard anterior chamber dimensions
• Titanium construction maintains geometry across repeat reprocessing

This I/A handle accepts interchangeable tips for combined aspiration and irrigation during cortex removal and anterior chamber management. At 110mm overall length, the straight round handle provides balanced reach for anterior chamber and peripheral access. Stainless steel construction delivers reliable durability across countless reprocessing and sterilization cycles.

Features & Benefits

• Interchangeable tips support flexible aspiration and irrigation workflows
• Straight 110mm length optimizes anterior chamber accessibility
• Round handle ensures comfortable control throughout cortex removal
• Stainless steel provides lasting durability with routine sterilization

Constructed in titanium with a round handle and straight geometry, this I/A handle offers superior corrosion resistance and refined ergonomics compared to stainless steel equivalents. The 110mm overall length provides comfortable working distance during cortex removal and final chamber irrigation. Lightweight titanium construction reduces hand fatigue during extended cortical cleanup phases in prolonged procedures.

Features & Benefits

• Titanium construction resists corrosion and wear
• Round handle provides comfortable grip
• 110mm length suits anterior chamber reach
• Lightweight design reduces hand fatigue

This I/A handpiece integrates a 17-gauge outflow and 23-gauge inflow configuration with a 0.3mm straight port geometry for precise cortex removal and anterior chamber fluid management. The reusable stainless steel construction supports reliable handoffs during both routine and complex phacoemulsification cases, including MICS procedures where compact tip dimensions minimize incision trauma.

Features & Benefits

• 17-gauge outflow and 23-gauge inflow for balanced irrigation-aspiration
• 0.3mm straight port enables precise cortex and debris removal
• Compact configuration optimizes visualization during posterior capsule safety
• Stainless steel material provides durable reprocessing across many cases

This 0.5mm screw‑in I/A tip threads onto a standard handpiece for selective aspiration and chamber reformation during cortical cleanup. The threaded attachment supports secure seating and predictable replacement across reprocessing cycles, while the 0.5mm port suits broader cortex removal flow rates. Stainless‑steel construction is built for repeated clinical use.

Features & Benefits

• 0.5mm port supports broader cortex aspiration flow
• Threaded screw‑in attachment seats securely on standard handpieces
• Suited to anterior chamber manipulation workflows
• Stainless‑steel construction holds shape across repeat reprocessing

This 45‑degree angled stainless‑steel I/A tip pairs a 0.3mm aspiration port with a 45mm shaft to reach the chamber angle and peripheral cortex during phacoemulsification. The angled geometry lets the surgeon clear cortex behind the iris without rotating the bottle, and stainless‑steel construction holds shape across repeated reprocessing.

Features & Benefits

• 45‑degree angle reaches chamber angle and peripheral cortex
• 0.3mm port supports controlled aspiration flow
• 45mm length suits standard anterior chamber dimensions
• Stainless‑steel construction holds shape across repeat reprocessing

This 45‑degree angled stainless‑steel I/A tip combines a sharply angled shaft with a 0.3mm aspiration port to reach the chamber angle and peripheral cortex during phacoemulsification. The 45mm length and angled geometry let the surgeon clear cortex behind the iris without rotating the bottle, and stainless‑steel construction holds shape across repeated reprocessing.

Features & Benefits

• 45‑degree angle reaches chamber angle and peripheral cortex
• 0.3mm port supports controlled aspiration flow
• 45mm length suits standard anterior chamber dimensions
• Stainless‑steel construction holds shape across repeat reprocessing

Access to epithelial accumulation along the incision margin and chamber periphery is optimized by a 45‑degree angled I/A tip with 0.5mm port. The angled geometry reduces manipulation force while the port maintains controlled aspiration during delicate cleanup. The 45mm length supports comprehensive chamber coverage.

Features & Benefits

• 45‑degree angled geometry targets incision margin epithelium
• 0.5mm port enables smooth cortical aspiration
• 45mm working length provides comprehensive chamber reach
• Stainless‑steel bore maintains port reliability

Angled at 90 degrees, this I/A tip delivers controlled aspiration and irrigation through a single 0.3mm port positioned for optimal anterior chamber access. The 45mm overall length supports reach across the surgical field, while stainless‑steel construction maintains rigidity during multiple handoff cycles. Single‑use sterile format preserves port geometry and aspiration characteristics case to case.

Features & Benefits

• 90‑degree angle optimizes anterior chamber accessibility
• 0.3mm port provides balanced aspiration and irrigation
• 45mm length extends reach across the surgical field
• Stainless‑steel construction provides robust structural rigidity

Precise epithelial aspiration along the chamber floor and posterior angles requires a 90‑degree angled I/A tip with fine 0.3mm port. The sharp 90‑degree bend accesses difficult‑to‑reach locations while the port minimizes chamber disturbance. The 45mm length provides adequate reach for all chamber zones.

Features & Benefits

• 90‑degree angle targets chamber floor epithelium
• 0.3mm fine port prevents chamber disruption
• 45mm working length reaches posterior angles
• Stainless‑steel construction ensures consistent bore quality