Your cart is empty!
This 1mm angled sideport knife creates the small secondary paracentesis used for second‑instrument access during cataract surgery. The narrow blade produces a tight self‑sealing wound just wide enough for a chopper or hook, preserving chamber stability while a second tool enters. Individually sterile packaging with six per box.
Features & Benefits
Angled at 15 degrees with a 3mm blade and a blue screw‑in tip, this micro knife creates side‑port and paracentesis incisions for cataract and anterior segment work. Single‑use sterile delivery preserves the sharp cutting edge, and the screw‑in format gives a secure connection to the included handle.
Built for phacoemulsification entry, this angled 2.85mm slit knife features a beveled‑up blade on a full round‑stock steel handle. The geometry produces a clean self‑sealing keratome incision sized for standard phaco tips, while the round handle profile supports balanced fingertip rotation during entry. Sold individually sterile with six per box.
Suited for clear corneal tunnel dissection, this 2mm angled crescent blade carries a beveled‑up edge for graded lamellar work. The crescent geometry tunnels through the cornea in a controlled plane ahead of phaco entry, while the angled shaft preserves the surgeon's view of the cutting tip. Sold individually sterile with six per box.
This 23‑gauge MVR blade is a single‑use sterile instrument designed for controlled pars plana puncture during micro‑incision vitreoretinal surgery. The straight profile delivers consistent blade sharpness case‑to‑case, eliminating the variability inherent in reusable instruments. Disposable sterility ensures no edge degradation across the procedure.
Designed for phacoemulsification and micro‑incision cataract surgery, this 1.8mm angled slit knife combines a beveled‑up single‑bevel edge with a round steel handle for fingertip control. The sterile, disposable format delivers the sharp, predictable entry geometry that MICS techniques require, without relying on repeated sterilization. Each blade arrives ready for immediate use, supporting case‑to‑case consistency in anterior chamber penetration.
Angled 15 degrees on a 5.7mm blade, this microknife is built for slightly longer corneal entries than standard 5mm patterns. The added cutting length supports incisions sized for larger keratome paths, while the full handle preserves rotational control through the entry stroke. Sold individually sterile with six per box.
This stab blade angled 15 degrees with a 5.7mm screw‑in tip creates focused stab incisions for drain placement and trocar entry where a defined entry geometry is needed. The screw‑in fitting secures the blade to compatible handles, and the sterile six‑per‑box format suits routine OR stocking.
Built with a double‑bevel cutting geometry, this 2.8mm angled phaco slit knife produces a self‑sealing main incision with reduced corneal distortion. The full handle gives steady control across the entry stroke, and the sterile single‑use format eliminates variability between cases.
The 5mm green‑coded micro knife angled 15 degrees on a full handle creates side‑port and paracentesis incisions sized for the wider working faces of complex anterior segment cases. The full handle supports a stable single‑stroke entry, and color coding identifies the blade at a glance.
Angled at 60 degrees, this lamellar blade is configured for controlled stromal dissection during corneal lamellar work. The fixed bevel geometry supports a uniform plane through the lamellae, and the sterile presentation suits direct introduction to the operative field. Boxed in counts of six for rotation through scheduled cases.
This angled slit knife features a 3mm blade optimized for the anterior chamber access needed in corneal and cataract entry procedures. The angled geometry improves visualization and instrument approach angle during tight paracentesis and refractive incisions. Disposable single‑use design preserves blade sharpness for predictable incision creation.
The #67 Bistouri disposable blade carries a curved cutting tip for controlled stab incisions and adhesion division during ophthalmic and oculoplastic work. Individually wrapped sterile delivery preserves edge sharpness, and the twelve‑per‑box configuration suits routine OR stocking.
Clear Control 3D delivers a thinned angled slit knife optimized for minimally invasive cataract incisions. The 1.8mm blade with micro bevels and reduced profile (22 percent thinner than standard) causes minimal wound margin stress during temporal or superior entry. Sold sterile and individually packaged, the angled geometry and precision edge produce consistently self-sealing anterior chamber incisions.
The clear cornea UniBevel knife at 2.4mm with double‑beveled angled blade creates a self‑sealing main incision with a single‑plane cut. The double bevel concentrates cutting force into the corneal lamellae for clean wound geometry, and the full handle supports steady control.
This clear corneal knife features angled geometry with parallel sides for self‑sealing incision creation during cataract surgery. The 3mm blade width accommodates standard clear corneal entry. Disposable format provides consistent sharp cutting and precise wound architecture for each procedure.
This 2mm straight crescent blade employs a double‑beveled geometry that supports controlled lamellar dissection and stromal bed preparation. Arriving sterile in a 6‑per‑box configuration, each disposable blade eliminates the uncertainty of blade edge sharpness. The consistent cutting edge supports predictable tissue cleaving whether used in DSAEK, DMEK, or manual lamellar keratoplasty.
This straight crescent blade with 2mm cutting edge provides controlled limbal incisions during astigmatism correction and anterior segment procedures. The full handle supports fine depth control, and six sterile units per box facilitate case scheduling.
This depth gauge knife is calibrated for limbal relaxing incision procedures, with a preset 300‑micron blade depth. The straight geometry supports predictable incision placement during astigmatic correction. Sold sterile in boxes of six, each disposable blade arrives sharp and ready.
This depth gauge knife is specifically designed for limbal relaxing incisions in refractive cataract surgery, with a 600‑micron depth preset that prevents full‑thickness corneal penetration. The straight orientation and full handle support controlled blade advancement. Sterile single‑use format ensures repeatable depth accuracy across cases.
The Depth Gauge Knife (LRI 600) is a sterile single‑use instrument for precise limbal incision depth control during limbal relaxing incision and astigmatic correction procedures. Its straight configuration maintains consistent blade geometry from first use through closure, preventing the edge wear that compromises reusable blades. Sterilization as a disposable ensures predictable cutting performance.
This depth gauge knife features a preset 300‑micron blade height, enabling consistent stromal pocket depth during LASIK, PRK, or other refractive procedures. The full handle provides confident grip control during corneal passes. Sold as a sterile disposable in boxes of six, each knife maintains consistent blade definition case‑to‑case.
This disposable 64‑gauge blade offers a round tip profile suited to delicate anterior segment work and precision dissection. The blade geometry provides smooth entry and controlled manipulation during ophthalmic microsurgery. Sold sterile in bundles of six, each blade arrives with uniform edge sharpness ready for immediate use.
An angled 2.75mm corneal/implant knife on a full handle, this disposable blade enters the cornea at a controlled angle for IOL implantation through a clear‑corneal incision. The double‑beveled edge cuts cleanly in both directions for predictable wound architecture. Each blade arrives individually sterile, six per box.
The #65 lance disposable blade carries a 15 degrees cutting tip for sharp stab entries through cornea and limbus. The lance geometry produces a clean point of entry sized for paracentesis and small ophthalmic stab incisions. Each blade is individually wrapped sterile with twelve per box.
This LRI knife delivers the precision edge required for refractive incision making and limbal relaxing cuts. The 0.5mm straight blade maintains sharp, reproducible entry profiles essential for micro-incision corneal surgery. Pre-sterilized and packaged six per box, the instrument supports consistent blade sharpness across sequential cases without compromise.
The 5mm micro blade tip angles the cutting edge for fine ophthalmic incision work, sized for paracentesis and small corneal entries. The angled geometry presents the cutting face cleanly to the corneal surface, and the sterile delivery preserves edge sharpness.
Angled 15 degrees with a 5mm blade, this disposable micro knife is suited for controlled corneal and limbal entry. The screw‑in green tip allows fast intraoperative attachment to a compatible handle, supporting predictable incision geometry. Each knife is sold individually sterile with six per box for routine workflow.
This angled 15� micro knife with a 3mm blade and full handle provides controlled corneal entry for ophthalmic microsurgery. The sterile single‑use design supports reproducible incision formation.
Angled at 22.5 degrees with a 4mm screw‑in light‑blue tip, this micro knife creates secondary incisions in cataract and anterior segment work where a steeper blade angle than the 15‑degree variant is wanted. Single‑use sterile preserves the cutting edge.