Your cart is empty!
Select a category below to browse instruments
Categories
Browse Instruments
This double‑ended drill sleeve accommodates both 3.2mm and 4.5mm drill bits and tap guides for cortical screw placement and malleolar screw fixation. The interchangeable design reduces inventory while supporting precise screw positioning through pre‑drilled cortical pathways. Stainless steel construction ensures durability across hundreds of orthopedic fixation cases.
Features & Benefits
This 2.5mm quick‑connect drill bit accommodates standard orthopedic drilling systems and features a 110mm total length with 85mm working shaft. The slightly larger diameter suits pilot drilling for medium‑bore fixation screws in spine and major orthopedic work. Stainless steel construction ensures reliable performance across extended clinical use.
This quick‑connect 2.7mm drill bit is designed for intramedullary canal preparation and bone fixation in orthopedic procedures. The 110mm shaft delivers adequate reach for deep femoral or tibial work, while the straight geometry maintains consistent bore trajectory. Stainless steel construction ensures durability across repeated sterilization cycles and multiple cases.
This 2mm quick‑connect drill bit fits standard orthopedic drill systems and features a 110mm total length with 75mm working shaft. The precise diameter suits pilot drilling for small‑diameter screws in hand surgery and delicate orthopedic work. Stainless steel flutes resist dulling across hundreds of drilling cycles.
This SQC 1.5mm drill bit is sized for pilot hole creation in fine-bore orthopedic applications, including ligament and small-fragment fixation. The 85mm total length with 18mm working depth supports precise trajectory control in compact surgical fields. SQC (surgical quality carbide) construction delivers consistent cutting geometry through repeated sterilization.
The 2.2mm SQC drill bit offers stepped-up diameter for transitional screw-hole preparation in polyaxial and variable-angle fixation systems. At 110mm length with 32mm working depth, it provides margin for staged drilling protocols in cancellous bone. Carbide construction resists thermal fatigue during repeated high-speed intraoperative use.
This compact 2.5mm SQC bit provides intermediate reach for standard-depth metaphyseal and diaphyseal drilling. The 110mm length with 32mm working depth balances reach with control, supporting consistent hole placement in proximal humerus, femur, and tibia fixation. Carbide construction resists wear during high-volume orthopedic case loads.
This longer 2.5mm SQC bit extends reach into intramedullary canals and posterior vertebral body positions during spinal fusion and long-bone repair. The 180mm shaft with 32mm working depth enables multi-stage drilling through soft tissue layers and dense cortical bone. Carbide edge geometry remains consistent across repeated cases.
The 2.7mm SQC bit accommodates larger-gauge screw-hole preparation and cannulated systems in trabecular and metaphyseal bone. At 100mm length with 29mm working depth, it reaches common orthopedic exposure depths while preserving margin for bone-layer variation. Carbide edge maintains geometry across repeated sterilization and use cycles.
The 2mm SQC drill bit bridges fine-fragment and standard screw-hole preparation in orthopedic fixation. At 100mm total length with 21.5mm working depth, it provides adequate reach and working margin for midline and lateral exposures. Carbide tip construction maintains edge geometry across repeated sterilization cycles in high-volume settings.
This extended 2mm SQC drill bit accommodates deeper intramedullary canal and vertebral body access. The 125mm shaft with 21.5mm working depth enables surgeons to reach through layered soft tissue and create pilot holes in cancellous bone without loss of trajectory. Carbide construction ensures consistent performance across surgical site variations.
This 3.5mm SQC bit provides primary screw-hole drilling for standard-gauge fixation in metaphyseal and diaphyseal bone. The 110mm length with 41.5mm working depth supports varied tissue depth and enables multi-stage drilling through cortical layers. Carbide construction maintains consistent cutting geometry under intraoperative loads.
This extended 3.5mm SQC bit reaches deeper intramedullary positions and posterior vertebral body sites during revision and spinal fusion cases. The 195mm shaft with 50mm working depth provides maximum reach while maintaining adequate margin for cortical breakthrough and trajectory control. Carbide tip geometry resists fatigue stress.
The 4mm SQC bit supports large-diameter screw-hole and intramedullary reaming applications in revision and structural bone repair. At 195mm length with 40mm working depth, it reaches deep cancellous and medullary sites while maintaining trajectory control. Carbide construction provides consistent performance through extended operating room use.
Jacobs chuck orthopedic drill bits accommodate threaded chuck coupling for instruments configured with traditional drill handpieces. The 1.5mm flute threads fine pilot holes during delicate wrist, ankle, and small fragment fixation, and the 70mm overall length with 30mm working dimension suits confined surgical approaches. Reusable stainless steel maintains edge sharpness across repeated procedures.
This 2mm orthopedic drill bit with a Jacobs chuck fitting at 85/38mm working geometry drills cortical bone for screw, pin, and wire placement during orthopedic fixation. The Jacobs chuck fitting accepts the bit into standard hand and power drills.
Compact Jacobs chuck drill bits reduce overall length to 106mm while maintaining a 3.2mm flute for pilot hole creation in confined anatomic spaces during wrist, ankle, and hand fracture fixation. The 48mm working dimension accommodates limited surgical approaches, and the Jacobs coupling permits efficient handpiece changes. Reusable stainless steel supports repeated clinical use.
Jacobs chuck drill bits with 3.2mm flute diameter and extended 180mm overall length support pilot hole creation in long bones during major fracture fixation and intramedullary work. The 70mm working dimension accommodates both percutaneous and open approaches, and the Jacobs coupling permits use with standard drill handpieces. Reusable stainless steel endures across many cases.
This Jacobs chuck 3.5mm drill bit features a straight profile and 180mm length, designed for bone drilling in orthopedic implant fixation. The Jacobs chuck interface provides a secure grip while allowing rapid repositioning.
Jacobs chuck drill bits scaled to 4.5mm diameter thread larger‑bore pilot holes and tap holes during spinal instrumentation and large bone fixation. The extended 180mm overall length with 70mm working dimension reaches deep within vertebral bodies and long‑bone intramedullary canals, and the Jacobs coupling permits use with standard drill handpieces. Reusable stainless steel maintains performance.
This orthopedic quick‑connect drill bit in 3.2mm diameter enables efficient cortical and cancellous bone preparation for guidewire and screw placement. The straight geometry ensures perpendicular bone drilling without deflection, supporting reproducible hole placement in vertebral bodies and long‑bone cortices. Stainless steel construction tolerates repeated sterilization without edge degradation.
Orthopedic drill bits designed with quick‑connect coupling facilitate rapid percutaneous and open drilling in hand surgery, wrist, and ankle fixation where compact working dimensions are essential. The 3.2mm flute threads pilot holes in smaller cortical bone, and the 145mm overall length with 120mm working dimension permits navigation through limited surgical approaches. Reusable stainless steel supports repeated use.
This 3.2mm orthopedic drill bit employs a quick connect chuck for rapid interchange during bone drilling. The straight geometry and 195mm length support predictable drilling through cortical and cancellous bone when preparing for fixation hardware.
Orthopedic drill bits with quick‑connect coupling accept rapid chuck changes during complex fracture and joint reconstruction procedures. The 3.5mm flute diameter threads pilot holes for cortical screws across long bones and vertebral bodies, and the 195mm overall length with 170mm working dimension accommodates both percutaneous and open approaches. Reusable stainless steel maintains cutting edge durability across many cases.
The 4.5mm orthopedic drill bit is configured with a quick connect chuck to streamline interchanges at the surgical field. Its straight profile and 195mm shaft support reliable bone penetration across diaphyseal and metaphyseal regions during implant preparation.
Wide 6mm quick‑connect drill bits accommodate larger diameter pilot holes and thread holes during major fracture fixation and spinal instrumentation. The 195mm overall length with 170mm working dimension reaches deep within long bones and vertebral bodies, and the quick‑connect design permits efficient intraoperative bit changes. Reusable stainless steel maintains cutting edge performance across cases.
This quick‑connect drill bit measures 1.5mm diameter with 18mm flute length for 2.4mm locking screw prepartion during orthopedic fixation. The straight geometry and 85mm overall length support precise pilot hole creation, and stainless steel construction maintains sharpness across many surgical cases.
The 1.5mm twist drill bit with round chuck end and 17mm flute length is designed for initial intramedullary canal preparation and soft bone entry during orthopedic fixation. The straight geometry maintains bore trajectory through dense cortex, while the 127mm overall length suits hand‑held or power‑assisted drilling in extremity and spinal work. Stainless steel construction resists corrosion.
The 2.5mm twist drill bit with 23mm flute is engineered for step‑wise bone removal in multi‑stage intramedullary reaming and plate screw hole drilling. At 127mm, the straight profile maintains consistent trajectory through cortical and cancellous bone. Stainless steel construction ensures durability across repeated sterilization and use.
Twist drill bits prepare cortical bone for screw placement, K‑wire passage, and orthopedic fixation. This 2.7mm diameter bit pairs a 30mm flute with a round drill‑chuck end that seats into standard power and hand chucks. The straight 127mm overall length keeps the bit close to the bone during cortical drilling, and stainless steel construction preserves the flute geometry through repeated use.
Our sales specialists are available Monday through Friday, 9am to 5pm EST.