Algerbrush & Accessories

A replacement 3.5mm round diamond burr in medium grit for the Algerbrush II chuck. The diamond surface removes corneal rust rings and superficial epithelial debris more aggressively than a carbide burr, suited to larger or more adherent rust deposits.

Features & Benefits

• 3.5mm round diamond burr removes corneal rust rings
• Medium grit balances cut rate and surface finish
• Chuck‑only format installs in Algerbrush II handpiece
• Diamond surface outlasts carbide on adherent deposits

The 0.5mm Algerbrush II replacement burr is sized for atraumatic removal of superficial corneal foreign bodies and rust rings. Each burr is delivered individually sterile within a five‑per‑box configuration, supporting clean case turnover in clinic or OR settings.

Features & Benefits

• 0.5mm burr sized for superficial corneal foreign body removal
• Designed as an Algerbrush II replacement head
• Individually sterile packaging for clean handoff
• Five per box for clinic inventory

This replacement diamond burr fits the Algerbrush 2 chuck and delivers a 2.5mm round fine‑grit head for removing corneal rust rings and superficial epithelial debris. The fine grit takes off rust without gouging Bowman's layer, and the round profile contours to the corneal curvature during the sweep.

Features & Benefits

• 2.5mm round head contours to corneal curvature
• Fine grit removes rust rings without gouging Bowman's layer
• Chuck‑only replacement fits Algerbrush 2 handpieces
• Supports clean epithelial debridement

This replacement 1mm carbide burr chuck fits the Algerbrush II for corneal foreign body and rust ring removal. The 16.5 × 1.59mm shaft seats into the handpiece collet and presents a 1mm tungsten‑carbide tip with a 20.5mm overall length, restoring cutting action when the original burr is worn or contaminated.

Features & Benefits

• 1mm carbide burr removes corneal rust rings
• 16.5 × 1.59mm shaft seats into Algerbrush II collet
• Tungsten carbide tip restores worn or contaminated burrs
• 20.5mm overall length matches OEM Algerbrush II geometry

This replacement diamond wheel burr is engineered for the Algerbrush 2 motorized handpiece. The 5mm medium-grit wheel provides controlled abrasive action for pterygium tissue removal. Chuck-only design allows quick tool changes without instrument downtime.

Features & Benefits

• 5mm medium-grit diamond wheel for controlled abrasion
• Direct replacement for Algerbrush 2 handpiece
• Chuck-only design for rapid tool changeover
• Disposable burr design for case consistency

The Algerbrush II is a battery‑operated motorized handpiece used to remove corneal rust rings and residual pterygium tissue. A single‑speed motor drives a 3.5mm round diamond burr at medium grit, with a tip cover protecting the burr between uses. The unit runs on a single AA battery, and the 105mm body suits handheld corneal work.

Features & Benefits

• Battery‑operated single‑speed handpiece for corneal rust removal
• 3.5mm round diamond burr at medium grit
• Tip cover protects burr between cases
• 105mm body suits handheld corneal work

This 1mm Algerbrush burr tip is designed for selective corneal rust ring removal and epithelial polishing. The small diameter allows precise control when cleaning iron-stained tissue without extending beyond the clinical pathology. This reusable tip integrates with standard motorized handpiece systems for efficient debris removal.

Features & Benefits

• 1mm burr diameter for controlled rust ring removal
• Fine working edge removes iron oxide selectively
• Compatible with standard motorized ophthalmic handpieces
• Reusable tip supports multiple procedures per sterilization cycle

The Algerbrush II is a battery‑operated motorized handpiece designed to remove corneal rust rings and superficial foreign bodies with a 0.5mm carbide burr. Single‑speed operation gives the clinician predictable rotation, and the included tip cover protects the burr between uses. Powered by a single AA battery, the 105mm handpiece is sized for office and exam‑room use.

Features & Benefits

• 0.5mm carbide burr removes corneal rust rings and foreign bodies
• Single‑speed motorized handpiece for predictable rotation
• Tip cover protects the burr between uses
• Runs on one AA battery for office and exam‑room use

The Algerbrush II removes corneal rust rings and small foreign bodies with a battery‑driven 1mm carbide burr. A single‑speed motorized handpiece delivers consistent rotation while a torque‑limited clutch slips before the burr can drive into Bowman's layer. The tip cover protects the burr between cases, and the AA cell makes setup straightforward at slit lamp or chairside.

Features & Benefits

• 1mm carbide burr removes corneal rust rings cleanly
• Torque‑limited handpiece protects Bowman's layer
• Single AA battery powers chairside or slit‑lamp use
• Included tip cover protects the burr between cases

Powered by a single AA battery, this Algerbrush 2 pterygium handpiece drives a 2.5mm round diamond burr at a single speed for surface debridement of corneal rust rings, pterygium remnants, and epithelial irregularities. The fine‑grit diamond surface removes tissue gradually under tactile control, and the included tip cover protects the burr between uses. The 105mm motorized body sits comfortably in pencil grip.

Features & Benefits

• 2.5mm round diamond burr with fine grit for surface debridement
• Single‑speed motorized handpiece for predictable removal
• AA battery operation eliminates cord management
• Tip cover protects the burr during storage

This battery-operated Algerbrush 2 is configured for pterygium debridement and limbal tissue smoothing. The 4mm fine-grit diamond burr wheel operates at steady single speed, providing consistent abrading force across the pterygium apex and scleral attachment. The compact motorized handpiece enables precise removal of residual fibrous tissue while minimizing healthy conjunctival trauma.

Features & Benefits

• 4mm wheel-shaped diamond burr (fine grit) for pterygium debridement
• Single-speed battery operation for steady, controlled abrasion
• 106mm total length fits orbital and limbal geometry
• Includes one AA battery and protective tip cover

The Algerbrush 2 is a motorized hand piece designed to treat pterygium by removing aberrant conjunctival and fibrovascular tissue. The 5mm diamond wheel burr operates at a single speed for controlled abrasion of the surgical bed. Battery operation provides cordless portability and ready access.

Features & Benefits

• Battery-operated single-speed motorized handpiece
• 5mm wheel-shaped medium-grit diamond burr
• Engineered for pterygium tissue debridement
• Portable cordless design for OR convenience

This replacement chuck for the Algerbrush 2 handpiece is sold individually and provides the mechanical coupling interface between the motor and burr. Precision engineering ensures reliable concentricity and backlash‑free rotation during corneal abrasion procedures. Stainless steel construction supports repeated sterilization and multi‑case durability.

Features & Benefits

• Individual replacement chuck for Algerbrush 2 handpiece
• Precision‑engineered for concentric burr rotation
• Supports reliable engagement with motor drive
• Stainless steel durability across repeat sterilization

The Algerbrush 2 replacement motor powers corneal rust ring removal and surface epithelial debridement with consistent rotational speed and torque. This motor unit enables rapid, efficient ablation of iron‑oxide deposits without manual abrasion, reducing surgical time and tissue trauma. Compatible with standard Algerbrush 2 handpieces and accessories.

Features & Benefits

• Powers Algerbrush 2 handpiece for rust ring removal
• Consistent rotational speed reduces manual abrasion trauma
• Rapid corneal cleaning supports efficient cataract entry
• Standard Algerbrush 2 compatible design for efficiency

This carbide burr replacement attachment is designed for the Algerbrush 2 mechanical burr system used in corneal and scleral debridement procedures. The 0.5mm burr diameter enables precise epithelial removal during photorefractive keratotomy and therapeutic ablation. Compatible with the Algerbrush handpiece, supporting efficient surgical workflow.

Features & Benefits

• Carbide burr for Algerbrush 2 mechanical system
• Tiny 0.5mm diameter enables precise epithelial removal
• Compatible with established Algerbrush handpiece interface
• Reusable format supports cost-effective therapeutic keratotomy

This 5mm diamond burr features a durable abrasive head for fine corneal smoothing and epithelial debridement. The corrected 45mm overall length supports controlled access in ophthalmic microfields.

Features & Benefits

• 5mm diamond abrasive head for fine smoothing
• Supports epithelial debridement
• 45mm length enables precise maneuvering
• Compatible with standard burr handpieces

These ophthalmic burrs are designed for debridement of corneal and scleral surfaces during ophthalmic procedures. Their precise abrasive heads support controlled removal of surface tissue, and each package contains five sterile units.

Features & Benefits

• Fine abrasive head supports controlled debridement
• Sterile single-use units ensure safety
• Suitable for corneal and scleral procedures
• Packaged five per box

A replacement 0.5mm carbide burr for the Algerbrush II, this chuck‑only unit carries a 16.5 × 1.59mm shaft and 20.5mm overall length. The fine carbide head suits precise corneal rust ring removal where a smaller working footprint is preferred over the larger diamond burrs.

Features & Benefits

• 0.5mm carbide burr for fine corneal rust removal
• Chuck‑only format installs directly in Algerbrush II
• 16.5 × 1.59mm shaft fits standard handpiece
• 20.5mm overall length keeps action close to surface

This replacement carbide burr for the Algerbrush 2 measures 0.5mm in diameter and is packaged five per unit. Tungsten carbide construction delivers sustained cutting performance across multiple corneal haze ablation procedures. Compatible with standard Algerbrush 2 handpiece chucks for plug‑and‑play exchange between cases.

Features & Benefits

• 0.5mm tungsten carbide burr for corneal abrasion
• Five burrs per package for multi‑case inventory
• Compatible with Algerbrush 2 chuck system
• Maintains cutting edge across repeat use

This replacement carbide burr for the Algerbrush 2 measures 1mm in diameter and is packaged five per unit. Tungsten carbide construction sustains sharp cutting performance across multiple corneal haze ablation procedures. Compatible with standard Algerbrush 2 handpiece chucks for straightforward inventory management and case turnover.

Features & Benefits

• 1mm tungsten carbide burr for corneal smoothing
• Five burrs per package for repeated procedures
• Direct fit with Algerbrush 2 chuck compatibility
• Durable tungsten carbide resists dulling

This replacement chuck assembly secures burr tips and abrading elements to the Algerbrush 2 handpiece. The package of 10 supports instrument preparation and inventory replenishment in high‑volume practices. Standard fit ensures reliable torque transmission and safety during corneal surface work.

Features & Benefits

• Replacement chuck for Algerbrush 2 handpiece compatibility
• Ten per package supports practice inventory management
• Standard fit ensures reliable burr engagement
• Reduces downtime during rust ring removal procedures

This round diamond burr is engineered for controlled corneal epithelial removal and stromal debridement during photorefractive keratotomy (PRK) and therapeutic ablation procedures. The 2.5mm wide × 20.5mm long format provides precise abrasive contact while minimizing unintended surrounding tissue engagement. Reusable design supports cost-effective surgical workflows.

Features & Benefits

• Fine 2.5mm diamond burr for epithelial debridement
• Round geometry provides uniform abrasive contact
• Suitable for PRK and therapeutic keratotomy procedures
• Reusable format supports economical surgical programs