Your cart is empty!
Select a category below to browse instruments
Categories
Browse Instruments
This latex‑free silicone tubing replacement for the McIvor mouth gag at 6" length × 4.9mm diameter restores the cushioned bite surface that protects the patient's teeth during tonsillectomy and intraoral procedures. The latex‑free composition suits patients with latex sensitivity.
Features & Benefits
The Billeau large ear loop with 4mm × 7mm oval configuration and flexible shaft provides atraumatic removal of larger cerumen impactions and foreign bodies from the ear canal. The flexible shaft navigates canal anatomy without applying pressure to the canal wall. The round handle enables controlled rotation and extraction.
The medium Billeau ear loop carries a 3 × 5mm working loop on a flexible shaft with a round handle, sized for routine adult cerumen removal where the loop must follow canal curvature. The 161mm length keeps the operator's hand clear of the otoscope's field.
The Davis‑Crowe mouth gag provides complete equipment for patient‑left oral exposure, including double‑bite jaw compressors and four interchangeable tongue blades. This comprehensive assembly supports palatal, tonsillar, and oropharyngeal visualization during extended ENT procedures. Stainless steel construction is built for reliable performance and lasting durability across repeat clinical use.
The Davis-Crowe mouth gag provides bilateral tooth contact through a double-bite design with pads that stabilize the mouth opening while retracting the pharyngeal soft tissues. The included tongue blades (4 sizes) enable graduated retraction of the base of tongue during pharyngeal and laryngeal procedures. Stainless steel handles repeated sterilization.
The Davis mouth gag is a double-bite frame designed for intraoral retraction during oropharyngeal procedures. This left variant mounts to the left side of the mouth, drawing the soft palate and pharyngeal wall laterally to expose tonsillar and adenoidal tissues. The frame-only configuration allows blade or retractor interchangeability based on surgical preference.
Davis mouth gags left-sided with 45mm internal spread opening and small double-bite configuration provide stable oral-cavity exposure during tonsillectomy and pharyngeal procedures. Self-retaining ratcheted design eliminates manual tongue depression, freeing both surgeon hands for instrument work. Consistent jaw tension is maintained throughout extended dissection phases.
The Davis mouth gag left configuration with 60mm inside spread and medium double-bite setting is engineered for sustained pharyngeal exposure during left-sided tonsil and soft palate surgery. The double-bite mechanism prevents slippage during prolonged retraction. Ratcheted frame maintains opening against posterior pharyngeal resistance.
This left‑sided Davis mouth gag incorporates a 70mm inside spread in a large double‑bite configuration for maximum oral cavity retraction.
This right‑sided Davis mouth gag features a 45mm inside spread in a small double‑bite configuration for controlled oral retraction.
This right‑sided Davis mouth gag uses a 60mm inside spread in a medium double‑bite configuration to support broader oral exposure.
The Davis mouth gag in right configuration with 70mm inside spread provides strong bilateral jaw compression for palatal and pharyngeal exposure. The large, double‑bite design grips the dentition securely while maintaining an open operating field for tonsil, soft palate, and oropharyngeal access. Stainless steel construction is built for reliable performance and lasting durability across repeat clinical use.
The Davis tongue blade Size 2 without ether tube is designed for simple tongue retraction and visualization of the posterior oropharynx during tonsillectomy and pharyngeal surgery. The compact profile accommodates narrow oropharyngeal spaces without obstruction of the surgical field. Smooth stainless steel surface enables easy repositioning.
Sized for the pediatric oropharynx, this size 3 Davis tongue blade attaches to a Davis‑Boyle mouth gag during tonsillectomy and adenoidectomy. The smooth blade depresses the tongue and seats the endotracheal tube along the central channel; the without‑ether‑tube configuration is suited to modern inhalational and intravenous anesthesia. Stainless steel construction tolerates repeat steam sterilization across high‑volume tonsil lists.
Filling the gap between sizes 3 and 5 in the Davis tongue blade range, this size 4 blade attaches to the Davis‑Boyle mouth gag for tonsillectomy and palatal exposure in the school‑age and adolescent oropharynx. The without‑ether‑tube channel suits modern anesthetic circuits without legacy gas delivery. Stainless steel construction supports repeat steam sterilization across high‑volume tonsil lists.
Stepping up to the larger adolescent or adult airway, this size 5 Davis tongue blade seats into the Davis‑Boyle mouth gag for tonsillectomy and palatal exposure. The wider blade carries the depressed tongue clear of the operative field while housing the endotracheal tube; the without‑ether‑tube configuration matches contemporary anesthesia practice. Stainless steel construction supports repeated reprocessing through adult ENT lists.
The Denhardt mouth gag opens the oral cavity to a 30mm spread for tonsillectomy, intraoral exposure, and dental access. The 127mm length suits pediatric and small‑adult workflows, and the ratcheted hinge holds spread without continuous operator pressure.
The adult Jennings mouth gag at 8" × 6" opens the oral cavity with a ratcheted hinge for tonsillectomy, intraoral procedures, and dental work in adult patients. The larger frame holds the jaw open without continuous operator pressure, and the wide spread suits adult anatomy.
The Jennings mouth gag child configuration with 6.25 inch length is engineered for pediatric oropharyngeal exposure during tonsillectomy and adenoidectomy in young patients. The smaller frame and opening accommodate pediatric anatomy without risk of excessive palatal or pharyngeal stretch. Ratchet mechanism maintains consistent exposure throughout the procedure.
Sized for youth patients at 7" × 4‑1/2", this Jennings mouth gag scales the adult design down for pediatric and adolescent anatomy. The ratcheted hinge holds the jaw open during tonsillectomy and intraoral work, and the smaller frame avoids over‑opening in younger patients.
This McIvor mouth gag includes three blade sizes, with the large blade measuring 3‑3/4in × 1‑1/16in, designed for controlled oral cavity exposure during oropharyngeal procedures.
The McIvor mouth gag frame provides rigid support for tongue displacement and palatal exposure during oropharyngeal procedures. Its stable design enables hands‑free field visualization throughout extended cases, and the modular frame design accommodates various blade attachments. Stainless steel construction delivers durable performance across repeat surgical use.
The adult Molt mouth gag is sized for large surgical fields during tonsillectomy and velopharyngeal surgery in adult patients. The heavy-duty stainless steel frame maintains consistent opening against pharyngeal musculature, supporting hands-free exposure of the posterior oropharynx. Secure ratchet mechanism prevents unintended closure during prolonged procedures.
The small Molt mouth gag is sized for pediatric and narrow oropharyngeal fields during tonsillectomy and adenoidectomy in children. The reduced frame size allows secure positioning without posterior pharyngeal strain. Stainless steel ratchet mechanism ensures reliable exposure maintenance throughout surgery.
This mouth gag extension provides additional length for deeper pharyngeal and laryngeal access during extended ENT procedures. Compatible with standard mouth gag frames, it allows surgeons to position retraction hardware further back in the oropharynx while maintaining clear visualization. Stainless steel construction supports reliable performance across repeated sterilization cycles.
The left Ring blade #2 with 22 × 57mm working surface and integral groove for endotracheal tubes up to 24 Fr supports laryngeal retraction and intubated airway management during tonsillectomy. The integrated tube groove secures the endotracheal tube position without external fixation. The 157mm length provides secure hand control.
The Ring Blade #2 (right) provides a 22 × 57mm blade with an integrated groove accommodating endotracheal tubes up to 24 French during intubation management and airway procedures. The blade width and groove geometry enable safe tongue and laryngeal retraction without compression injury. Stainless steel ensures lasting durability.
The Ring Blade #3 (left) delivers a 29 × 72mm blade with integrated groove for endotracheal tubes up to 29 French, accommodating larger airway anatomy and extended laryngeal exposure. Its left orientation provides ergonomic retraction positioning, and the wide blade distributes pressure evenly across the tongue surface. Stainless steel ensures reliable reprocessing.
This ring blade tongue depressor (right configuration) features a 29mm × 72mm blade with an integrated groove to guide and protect endotracheal tubes up to 29Fr diameter during oral and pharyngeal procedures. The blade geometry retracts the tongue and soft palate while stabilizing airway tubes. The 160mm overall length provides comfortable reach and lever advantage.
Ring-blade tongues (#4 left) enable controlled visualization of the oral cavity and endotracheal tube guidance during anesthesia induction and airway management. The 34mm wide blade provides adequate coverage of the lingual surface and pharyngeal inlet. The integral groove accommodates endotracheal tubes up to 37 French, facilitating tube positioning without mucosal compression during intubation.
Our sales specialists are available Monday through Friday, 9am to 5pm EST.