Your cart is empty!
This single‑prong rigid rake retractor features a blunt prong, designed for atraumatic skin and superficial soft-tissue retraction during general surgical procedures. The rigid design maintains stable position once positioned, eliminating assistant fatigue during prolonged exposure. Its 165mm length provides balanced reach for moderate-depth access.
Features & Benefits
This single‑prong sharp rake retractor provides targeted skin and fascia retraction with pointed engagement suitable for securing wound edges during minor procedures. Its rigid construction resists bending, maintaining consistent retraction depth. The sharp prong anchors securely in tissue.
Ring tip counter‑balance forceps are engineered for microsurgical grasping where balanced weight distribution enhances control. The 1mm straight diamond‑dusted ring provides secure, non‑traumatic tissue engagement. The extended 254mm length supports deep‑field access while the balanced geometry reduces operator fatigue.
Robertson biopsy cup forceps feature 6mm cup tips and 400mm working length for remote tissue sampling in endoscopic or flexible instrumentation procedures. The cup design captures tissue cleanly without fragmentation, while the extended working length permits access to distal lesions. Reusable stainless‑steel construction supports reliable sampling across many cases.
Robertson angled‑up biopsy cup forceps with 6mm upbite tips and 400mm working length provide enhanced access to lesions in challenging endoscopic or flexible scope positions. The angled cup geometry improves tissue capture at difficult angles, while the extended shaft reaches distal lesion sites. Reusable stainless‑steel construction ensures reliable sampling performance.
The Rochester Pean hemostatic forceps provides rapid, secure vessel control during general surgical hemorrhage management. Its curved geometry and strong jaw closure support reliable hemostasis in deeper or harder-to-reach vascular fields. Floor-grade construction with stainless steel ensures sustained performance across routine surgical cases.
Extended at 305mm, these curved Rochester forceps clamp bulky tissue pedicles deep in the abdominal or pelvic field. The heavier jaw frame and standard curve secure dense fascia and vascular pedicles, while the long shaft keeps the surgeon's hand clear during deep dissection.
Curved Rochester‑Pean forceps at 184mm clamp vessels and soft tissue during general surgical hemostasis. The serrated jaws lock vessels securely under the ratcheted hinge, and the curved profile tracks tissue planes around the structure being clamped.
Rochester Pean forceps serve as curved hemostats and vessel clamps in abdominal and vascular surgery. The straight powerful jaw closure secures large vessels and tissue pedicles during ligation and hemostasis. Extended 305mm length provides reach into deep abdominal and pelvic cavities.
Rochester‑Pean forceps are heavy‑duty hemostatic clamps designed for securing vessels and dense tissue structures during general surgery. The straight jaw geometry and interlocking teeth ensure a firm, lasting hold on slippery tissues. 203mm length supports reach into deeper surgical fields.
Curved Rochester‑Pean hemostatic forceps at 159mm clamp small and medium vessels during general surgical hemostasis. The curved profile suits clamping around tissue planes, and the ratcheted hinge locks the clamp without operator force.
Straight Rochester‑Pean hemostatic forceps at 203mm clamp medium and large vessels during routine open work. Transverse serrations along the long jaw distribute closing force evenly to occlude flow without slipping. The ratcheted shanks hold occlusion hands‑free while the surgeon ties.
Sized at 230mm, this longer Rochester‑Pean hemostatic forceps reaches deeper vessels during abdominal and thoracic hemostasis. The straight profile suits in‑line clamping, and the longer body keeps the surgeon's hand well clear of the wound depth.
The Rochester-Ochsner artery forceps delivers precise hemostatic control with its 1 × 2 interlocking tooth pattern, ideal for firm vessel and ligature grip during general surgical hemorrhage control. The straight geometry and extended 260mm length support vascular work in deep abdominal fields. Stainless-steel construction provides lasting durability across repeated surgical cases.
The curved Rochester‑Ochsner forceps at 159mm carry a 1 × 2 tooth pattern for grasping vessels, tissue, and pedicles during general surgical hemostasis where additional tooth purchase is wanted. The ratcheted hinge locks the clamp without sustained operator force.
The Rochester‑Ochsner curved forceps provide powerful, reliable hemostasis across deep and difficult‑to‑reach vascular anatomy. The curved geometry enhances access to peritoneal and pelvic vessels. At 10" (254mm), this extended length reaches deep surgical sites while maintaining secure jaw interlocking.
These Rochester‑Ochsner forceps provide heavy‑duty vascular and tissue clamping through their fine‑toothed jaw pattern. The curved 184mm length extends reach into deeper abdominal and thoracic fields while maintaining consistent ratcheted hemostasis. The proven design supports lengthy vascular procedures.
Rochester-Ochsner forceps with 1 × 2 tooth interlocking pattern and ratchet lock provide controlled hemostatic clamping of vessels and tissue pedicles during abdominal and gynecological procedures. The straight geometry and 159mm length support precise placement and sustained vascular control. Locked position prevents unintended release during critical hemostasis.
This Rochester‑Ochsner straight forceps features 1 × 2 interlocking teeth designed for reliable grasping of dense tissue during general surgical procedures. The 1 × 2 tooth pattern distributes grip across the tissue surface without excessive crushing. Its 229mm working length and straight configuration provide stable control during tissue approximation and wound closure.
The straight Rochester‑Ochsner forceps at 254mm provides extended reach for grasping and retracting tissue in deep abdominal and pelvic operative fields. The clamping action and ratcheted handle enable secure hemostasis on vessels and tissue bundles. Stainless steel construction ensures durability across repeat surgical use.
Delicately pointed tips give these Rolf utility forceps a fine grasp on suture, drape edges, and small ophthalmic accessories at the field. The straight shaft and 108mm overall length keep the working tip clear of the surgeon's hand during precision handoffs. Light spring tension supports prolonged microsurgical use without finger fatigue.
The #0 root elevator delivers controlled leverage for careful luxation and elevation of teeth during dental extraction and endodontic procedures. Its straight, narrow blade design distributes force along the periodontal ligament, minimizing damage to alveolar bone and surrounding gingival tissue. Engineered for fine intraoperative control, this 150mm instrument is essential for atraumatic root canal access and primary tooth extraction.
The #1 root elevator offers optimal blade geometry for leverage and luxation in routine dental extractions and endodontic access procedures. Its slightly broader profile compared to the #0 variant provides enhanced mechanical advantage while maintaining delicate tactile control around the periodontal ligament and alveolar crest. This 150mm instrument balances power and precision for maxillary and mandibular applications.
The reverse #1 root elevator is angled and offset to approach impacted or angulated roots from alternative vectors, improving access in confined oral spaces and around adjacent teeth. Its specialized geometry reaches roots that standard elevators cannot access comfortably, making it invaluable during complex extractions and endodontic procedures. The 150mm length and reversed blade orientation provide ergonomic control while minimizing trauma to surrounding periodontal and osseous structures.
The #2 root elevator features a wider blade profile for enhanced mechanical advantage during challenging extractions involving deeply impacted or severely compromised roots. This geometry distributes elevation force more broadly, protecting alveolar bone integrity during complex periodontal and endodontic cases. The 150mm straight shaft provides stable control and visibility during delicate work around the gingiva and pulp chamber.
The double‑ended Rose trachea retractor provides bilateral tracheal stabilization during thyroid and cervical procedures. Its straight geometry allows symmetrical retraction, and the compact 130mm profile facilitates hand placement in the surgical neck. Stainless steel withstands repeated sterilization for routine ENT use.
Sized for otologic and microsurgical fields, this 15ga Rosen suction tube (1.46mm bore) draws fluid and small debris from delicate corridors without disturbing fine anatomy. The angled shaft preserves visualization through the microscope, while the 60mm working length within a 99mm overall body suits deep otologic exposure. Stainless‑steel construction holds up to repeat reprocessing.
The 15‑gauge Rosen angled suction tube delivers a heavier flow channel than the 16‑gauge variant, suited to ENT and otologic work where larger‑volume clearance is wanted under the operative microscope. The 60mm working length and 101mm overall length keep the hub close to the surgeon's fingertips.
Built at 16 gauge with a 60mm working length, the Rosen angled suction tube sits between the 15 and 17 gauge variants for moderate ENT and otologic flow. The 101mm overall length keeps the hub close to the surgeon's fingertips under the operative microscope.
The 17‑gauge Rosen angled suction tube delivers fine‑gauge clearance for ENT and otologic work, with the angled tip preserving visualization under the operative microscope. The 60mm working length keeps the working face close to the surgeon's fingertips.