Your cart is empty!
The Coakley antrum curette combines a 6mm working tip with a heavy curve designed for aggressive sinus pathology removal. Its large blade geometry and strong curve support deep maxillary sinus access and efficient curettage of diseased or polypoid tissue. Built from stainless steel for reliable performance across repeated sterilization cycles.
Features & Benefits
The Coakley antrum curette Size 5 with heavy curve and 5mm working tip provides aggressive antral disease removal while the pronounced curve enables access to lateral and superior antral compartments. Round handle improves tactile feedback during bone and disease curettage. The 178mm length supports secure positioning in deep maxillary sinus spaces.
The Coakley antrum curette Size Small with gently curved geometry and 5mm working tip is designed for controlled maxillary antral disease removal and sinus cavity curettage during caldwell-Luc and endoscopic approaches. The slight curvature accommodates antral recesses while the 178mm length maintains secure hand control. Stainless steel edge sustains sharpness through repeated use.
This acute-angled Coakley curette is shaped for efficient engagement with sinus ostium anatomy and antral linings during endoscopic sinus surgery. The angled blade presents a sharp edge to the work surface, reducing the force required for controlled tissue removal. Its reusable stainless steel construction ensures durability across many surgical procedures.
The Colver tonsil forceps provides curved-jaw grasping for secure tonsil manipulation during tonsillectomy and pharyngeal dissection. Its single open loop ring handle reduces hand fatigue during prolonged retraction. The curved geometry follows the tonsillar contour.
The Colver tonsil knife dissector, double-ended with 15mm curved blade and serrated opposite blade, enables controlled tonsil dissection and capsule separation during tonsillectomy. The curved round edge initiates dissection while the serrated blade handles fibrous capsular adhesions. The 211mm length supports reach into the tonsillar fossa.
Converse guarded chisels enable fine bone sculpting during rhinoplasty with built-in guard protection against unintended penetration of soft-tissue planes. The 6mm cutting edge suits delicate osteotomy work near the nasal dorsum and perpendicular plate. Curved-right ergonomic handle accommodates standard right-hand striking position during controlled nasal bone reduction.
The McKenty periosteal elevator combines a curved blade with a 5mm width suitable for controlled subperiosteal dissection during nasal, mastoid, and facial procedures. The standard curve follows anatomical contours during elevation and stripping, while the narrow blade width improves visibility in tight surgical spaces. Stainless steel construction supports reliable reprocessing.
Used to raise the periosteum from the nasal bones and maxilla during open rhinoplasty, this straight Converse periosteal elevator presents a 4mm wide blade on a 178mm shaft. The large concaved handle gives the surgeon a thumb‑driven grip for controlled pressure along the bony framework. Stainless steel construction maintains the leading edge through repeat osteotomy and dorsal preparation cases.
Cottle alar retractors expose the alar base and lateral nasal sidewall during rhinoplasty tip-refinement and columellar approaches. The tapered 16 to 13mm blade narrows progressively from handle to tip, optimizing visualization of the alar-domal junction while minimizing tissue trauma. Straight geometry delivers direct atraumatic retraction of thin alar soft tissue.
The Cottle chisel features a 6mm straight blade mounted in a diamond-knurled round handle for controlled bone work during nasal surgery. The knurled surface provides secure grip during mallet-assisted cuts on nasal bone and septum. The 180mm overall length permits safe hand positioning away from impact forces.
The Cottle chisel performs controlled bone removal and shaping during septal reconstruction and rhinoplasty. Its 6mm curved blade with centimeter depth markings (4-7mm) enables precise control during osteotomy advancement. The 184mm length supports bimanual technique with reliable tactile feedback.
Cottle nasal speculum with 50mm blades delivers wider exposure for comprehensive nasal and septum visualization during functional endoscopic sinus surgery and extended rhinologic procedures. The broader blade width accommodates multiple instruments and maintains atraumatic contact with nasal structures, supporting prolonged operative access without mucosal injury.
Cottle nasal speculum with a narrow 35mm blade design is engineered for precise exposure of intranasal structures during septoplasty, rhinoplasty, and functional endoscopic sinus surgery. The straight, spring-loaded blades provide atraumatic retraction of nasal mucosa and septum, enabling clear visualization of the operative field while minimizing postoperative edema.
The extra‑long Cottle nasal speculum carries 90mm blades tapered from 8mm to 10mm wide, with a set screw locking the spread at the desired width. The longer blade reaches deeper into the nasal cavity for septoplasty and rhinoplasty cases requiring posterior access.
The Cottle self-retaining nasal speculum with narrow tapered 75mm blades provides enhanced visualization of posterior nasal structures and sphenoid sinus access points during advanced functional sinus surgery. The larger blade width distributes opening pressure evenly. The self-retaining mechanism supports prolonged exposure without hand fatigue.
The double‑ended Cottle‑Neivert retractor pairs a two‑prong ball end with a single reversed retractor end on one instrument, suited to varied nasal retraction needs during septoplasty and rhinoplasty. The 203mm length lets the surgeon flip ends as the case progresses without an instrument exchange.
The Cottle osteotome delivers precise bone work during rhinoplasty and nasal reconstruction. Its 12mm straight cutting edge includes centimeter markings (4-7cm) for depth control during lateral and medial osteotomies. The 184mm length supports bimanual technique with reliable tactile feedback.
The Cottle retractor combines a sharp 10mm left prong with a ball tip right prong to support nasal septoplasty and rhinoplasty exposure. Asymmetric prongs accommodate the variable tissue planes encountered during septal dissection, while the flat serrated handle promotes secure grip during extended retraction. This 140mm straightens length supports access to deep nasal and septal structures.
The Cottle retractor combines a sharp right prong with a blunt ball-tip left prong to address asymmetric nasal anatomy during septoplasty. Its 140mm length and flat handle partly serrated design support secure positioning without tissue trauma. The mixed-prong geometry reflects Cottle's method for controlled dorsal and septal exposure.
Built with a strong curve and a deep hook, the Cottle retractor lifts and holds the alar cartilage and skin envelope during open and closed rhinoplasty. The 140mm length keeps the surgeon's hand clear of the nasal field, and the deep hook profile supports sustained tissue lift without slipping.
The Cottle nasal speculum provides robust exposure of the entire nasal cavity and sphenoid ostium during FESS and septorhinoplasty. Its large 80mm blades taper gradually from 10mm to 8mm, distributing contact pressure across the nasal sidewall and septum. The 140mm length enables single-handed operation.
The Cottle nasal speculum features 90mm tapering blades (10mm to 8mm) that open the nasal vestibule for wide septal visualization during septoplasty and rhinoplasty. The blade taper accommodates progressive nasal cavity anatomy, preventing lateral wall compression while maintaining surgeon sightlines into the operative field.
These tungsten carbide Cottle dorsal scissors combine angled shanks with serrated upper blades and flattened Ragnell tips for controlled septal and dorsal tissue cutting in rhinoplasty. The blunt tip geometry reduces penetration risk near underlying structures, while the angled approach improves field visibility. Gold ring handles support prolonged grip without fatigue, and tungsten carbide edges retain sharpness across multiple cases.
Straight cup forceps with 4.5mm jaws are engineered for grasping and manipulation of ENT tissue and small fragments during nasal, sinus, and laryngeal procedures. The cup-shaped design distributes grip across delicate mucosa, and the straight profile provides straightforward access through endoscopic portals while maintaining clear visualization of the operative field.
The Davis‑Crowe mouth gag provides complete equipment for patient‑left oral exposure, including double‑bite jaw compressors and four interchangeable tongue blades. This comprehensive assembly supports palatal, tonsillar, and oropharyngeal visualization during extended ENT procedures. Stainless steel construction is built for reliable performance and lasting durability across repeat clinical use.
The Davis-Crowe mouth gag provides bilateral tooth contact through a double-bite design with pads that stabilize the mouth opening while retracting the pharyngeal soft tissues. The included tongue blades (4 sizes) enable graduated retraction of the base of tongue during pharyngeal and laryngeal procedures. Stainless steel handles repeated sterilization.
Davis mouth gags left-sided with 45mm internal spread opening and small double-bite configuration provide stable oral-cavity exposure during tonsillectomy and pharyngeal procedures. Self-retaining ratcheted design eliminates manual tongue depression, freeing both surgeon hands for instrument work. Consistent jaw tension is maintained throughout extended dissection phases.
The Davis tongue blade Size 2 without ether tube is designed for simple tongue retraction and visualization of the posterior oropharynx during tonsillectomy and pharyngeal surgery. The compact profile accommodates narrow oropharyngeal spaces without obstruction of the surgical field. Smooth stainless steel surface enables easy repositioning.
Sized for the pediatric oropharynx, this size 3 Davis tongue blade attaches to a Davis‑Boyle mouth gag during tonsillectomy and adenoidectomy. The smooth blade depresses the tongue and seats the endotracheal tube along the central channel; the without‑ether‑tube configuration is suited to modern inhalational and intravenous anesthesia. Stainless steel construction tolerates repeat steam sterilization across high‑volume tonsil lists.