Your cart is empty!
A staple of FESS instrument trays, this size 1 Blakesley nasal forceps presents straight cup jaws on a 190mm shaft for removing polyps, ethmoid cells, and middle turbinate fragments under endoscopic guidance. The smallest size in the series fits the pediatric nasal cavity and the narrowest adult ostiomeatal complex. Stainless steel construction holds the jaw alignment that endoscopic forceps depend on through repeat sterilization.
Features & Benefits
This Blakesley Size 2 nasal forceps offers a smaller cup profile for finer nasal work, including delicate turbinate handling and polypoid tissue removal. The straight configuration maintains excellent visualization through the nasal corridor.
Blakesley nasal forceps with straight cup jaws deliver consistent control during turbinate reduction and lateral nasal wall work. The 6mm (Size 3) cup tip grasps tissue securely while the 115mm shaft provides adequate reach into nasal passages. Stainless steel construction is built for reliable performance across repeat clinical use.
Sized for larger nasal structures, this Blakesley nasal forceps features 6mm cup jaws with a 45‑degree upturned geometry for robust grasping of polyps and bone in extended FESS cases. The Size 3 specification accommodates wider sinus anatomy, while the upturned approach improves access to superior disease and frontal recess pathology. The 115mm shaft reaches posterior sinus and ethmoid structures.
The heavily curved Blakesley nasal forceps with 90‑degree upturned cup and diminutive 3mm jaws is designed for delicate grasping of fine tissue and small bone fragments in confined endoscopic spaces. The extreme curvature enables retrograde access to superior sinus structures, and the Size 00 specification suits detailed work in narrow sinus ostia. The 115mm working length provides adequate reach.
The Blakesley nasal suction forceps integrate a 2.5 × 4mm fenestrated jaw angled up 35 degrees with an internal suction channel, removing tissue and irrigation fluid through one instrument during functional endoscopic sinus surgery. The 100mm working length and 178mm overall length suit standard sinus access.
The Boies nasal fracture elevator features a straight shaft and 9mm blade designed for precise subperiosteal separation during nasal reduction and bony septum work. Its 195mm overall length provides leverage and reach through the nasal aperture into the pyriform fossa and dorsum. The rigid blade resists buckling during forceful reduction maneuvers.
This Boucheron round ear speculum set carries four large sizes � 5.5mm, 6.5mm, 7.5mm, and 9mm � for graduated ear canal examination across adult anatomies. The round profile preserves a clear visual axis to the tympanic membrane, and the matched set lets the examiner step through sizes without changing speculum families.
Sized to 3 French, this Brackman suction tube is built for fine aspiration in otologic and microsurgical fields where lumen control matters more than volume. Stainless‑steel construction supports cleaning of the narrow bore between cases. The small caliber draws fluid without disturbing adjacent middle‑ear or microsurgical structures.
The Brophy gum suture scissors carry curved sharp/sharp tips with a 36mm screw‑to‑tip distance, sized for cutting suture material flush against the gingival surface during oral surgical closure. The two‑tone finish identifies the cutting edge, and the 140mm length keeps the surgeon's hand clear of the oral field.
Built for septoplasty cartilage removal, this large Bruening septum forceps carries 8.5mm fenestrated jaws on a 191mm shaft. The window in each jaw lets cartilage protrude as the bite is taken, producing predictable strip removal without crushing surrounding mucoperichondrium. Stainless steel construction holds the jaw alignment that fenestrated forceps depend on through repeated steam cycles.
Built for posterior septal work, this size 2 Bruening septum forceps adds a cross‑action handle to 9 × 11mm fenestrated jaws on a 110mm working length. The cross‑action grip closes the jaws when the handle is released, giving the surgeon a one‑hand bite and hold on cartilage strips deep in the nasal cavity. Stainless steel construction maintains the jaw alignment that fenestrated bites demand through repeated reprocessing.
The Size 1 Buck ear curette with a blunt angled tip at 146mm removes cerumen without the sharp edge of the Size 1 sharp variant, suited to patients with sensitive canals or canal walls where a blunt approach is preferred. The angled geometry tracks external canal curvature.
The Buck ear curette Size 0 with sharp 1.5mm tip and angled shaft enables controlled excision of granulation tissue and disease from mastoid cavities and middle ear spaces. The sharp edge cuts cleanly along tissue planes. The angled 150mm design supports deep mastoid access while maintaining surgical visibility.
Angled with a sharp 1mm Size 00 working face, the Buck ear curette removes cerumen and small debris from the external auditory canal where a sharper bite is needed than the dull‑loop alternative. The 152mm length keeps the operator's hand clear of the otoscope's field.
This angled Buck ear curette accesses difficult mastoid recesses and sinus tympani during revision mastoid surgery. The sharp 2mm cup and angled approach enable removal of residual cholesteatoma and bone disease in posterior and superior compartments. Angled geometry reduces blind spots.
The angled Buck ear curette with 2mm outer diameter and sharp working edge is designed for selective cerumen removal and canal wall disease curettage during otologic procedures. The 152mm length supports controlled access through the aural canal, while the angled shaft preserves visualization during deep canal work. Sharp geometry enables efficient debris and disease removal.
The Buck ear curette Size 2 with sharp 2.5mm tip and angled shaft provides controlled excision of granulation and cholesteatoma from larger mastoid spaces and anterior epitympanic areas. The wider cutting edge accelerates material removal while maintaining precision. The angled 150mm shaft supports ergonomic deep-field work.
Sized at 3mm Size 3 with a sharp angled working face, this Buck ear curette removes cerumen and small debris from the adult external auditory canal. The sharp loop bites under impacted material without sliding, and the 152mm length keeps the operator's hand clear of the otoscope's field.
The Buck ear curette provides sharp, controlled removal of diseased bone, cholesteatoma, and granulation during mastoid surgery. Its straight geometry and 2mm sharp cup enable precise curetting of the epitympanic recess and sinus tympani. The compact 146mm length maintains excellent proximal control.
These large squeeze grip Caplan nasal scissors combine double‑action spring handle mechanics with a curved shaft and serrated blades for controlled dorsal and septal tissue cutting in extended rhinoplasty procedures. The double‑action spring reduces hand fatigue while maintaining fine blade precision. The 191mm length reaches throughout the nasal cavity.
Cawthorne micro scissors deliver fine, controlled dissection in otologic microsurgery and ENT endolaryngeal procedures. The curved right blade geometry enables precise separation of mucosa and ossicular attachments with excellent visibility through the operative microscope. The 4mm tip width supports delicate cuts in confined mastoid and middle-ear spaces.
Cinelli osteotomes with 12mm cutting edges and dual-guard design provide wider working surfaces for bone separation during endoscopic sinus and nasal procedures. The straight geometry maintains perpendicular cutting angles during ostium enlargement and bone-removal phases. Robust construction and guard design protect surrounding mucosa from unintended injury during controlled percussion strikes.
Built with a 14mm double‑guarded straight cutting edge, the Cinelli osteotome makes broad lateral nasal osteotomies while the guards limit unintended extension into adjacent tissue. The 158mm length carries the working face well past the surgeon's grip, and the double‑guard geometry preserves the planned cut line.
The Cinelli osteotome is designed with a 16mm straight cutting edge and double guards to protect soft tissue during controlled osteotomy in functional endoscopic sinus surgery (FESS), septal procedures, and mastoid work. The double guard mechanism prevents inadvertent mucosal or neural injury during sinus and ethmoid bone work. At 6.25 inches, the length provides adequate leverage for precise mallet‑driven bone removal.
This upturned circular cutting punch produces a 3.5mm diameter aperture in a single motion for tympanic membrane perforation creation or round window niche work during otologic and skull base procedures. The upturned geometry maintains visualization during the cutting stroke, and the 160mm working length reaches into the mastoid cavity. Stainless steel provides durable cutting performance.
The Colver tonsil knife dissector combines a 15mm curved blade with serrated top edge for controlled dissection of tonsillar tissue and capsular planes during tonsillectomy. The serrated edge prevents blade slipping on moist tonsillar capsule while the round distal tip provides atraumatic retraction. At 8.25 inches, the standard curve follows natural oropharyngeal contours during careful superior and inferior pole separation.
The Cloward rongeur features a serrated bite with 6 × 10mm jaw dimensions and angled‑up geometry for controlled removal of small bone fragments during mastoid surgery and ossicular bone work. The serrated cutting surface prevents slipping on hard bone while the angled‑up head orients the bite upward for optimal visualization. At 5 inches, the length provides adequate handheld control during intricate tympanic cavity work.
The Cloward rongeur with serrated cutting surfaces removes bone and promote hemostasis during cervical spine and laryngeal procedures. Its straight 6 × 10 jaw configuration fits confined surgical corridors. The 127mm length maintains optimal hand positioning.
The Coakley antrum curette large size with 6mm × 8mm tip and gentle curve enables controlled removal of granulation and mucosal disease from the maxillary antrum and sphenoid sinus during functional endoscopic sinus surgery. The curved geometry navigates sinus recesses without forcing. The 174mm length supports safe deep-field access.