Your cart is empty!
Built at 18 × 2mm with serrated tips on a bayonet handle, these Gruenwald nasal bayonet dressing forceps grasp packing and small tissue during nasal procedures while keeping the surgeon's hand clear of the operative line of sight. The bayonet geometry preserves visualization.
Features & Benefits
Sized at 12 French, this Frazier suction tube provides high‑capacity evacuation through deep operative corridors where smaller bores would clog. The 30‑degree angle reaches behind overhanging structures, and the thumb‑plate cutoff hole gives the surgeon real‑time control over suction strength. An included stylette clears the tip when debris accumulates.
The medium 9 French (3mm) Frazier suction tube angled 30 degrees with a stylette at 100mm working length delivers moderate flow during general surgical cases. The angled tip preserves visualization, and the thumb‑plate cutoff modulates flow at the surgeon's fingertip.
Sized at 18mm on a hexagon handle, this Size 2 laryngeal mirror sits at the smaller end of the routine adult exam range, suited to patients where the larger sizes crowd the oropharynx. The polished face holds image clarity, and the hexagon handle resists rolling on the exam tray.
The Blakesley nasal forceps feature a straight 3.5mm × 10mm jaw geometry optimized for removing bone and polyps during functional endoscopic sinus surgery (FESS). The 115mm working length positions the jaw deep within the nasal cavity while maintaining visibility and control. The straight profile supports direct access to the ostium and sphenoid sinus areas.
The Freer periosteal elevator pairs semi‑sharp and blunt 4.5mm working ends on a double‑ended frame, sized for septoplasty and rhinoplasty periosteal lift. The semi‑sharp end initiates the elevation plane, while the blunt end carries the dissection through without cutting underlying tissue.
The large 10 French (3.33mm) Frazier suction tube angles 30 degrees with a stylette at 100mm working length, sitting between the medium 9Fr and X‑large 11Fr formats. The angled tip preserves visualization, and the thumb‑plate cutoff modulates flow.
This Sheehan osteotome features a straight 2mm blade with a hexagonal handle and a 159mm overall length for controlled osteotomy work in confined nasal spaces.
This double-ended Freer elevator with 5mm sharp and blunt tips provides bidirectional mucosal and periosteal elevation during nasal septal and sinus surgery. The 191mm length supports extended reach to the sphenoid ostium and posterior ethmoid. Alternating sharp and blunt ends allow the surgeon to transition between dissection and blunt retraction without instrument exchange.
Sized at 24mm with a hexagon handle, this Size 5 laryngeal mirror gives a wider field of view than the standard hex‑handle exam mirrors. The hexagon handle resists rolling on the exam tray, and the polished face holds image clarity during posterior pharyngeal inspection.
This laryngeal mirror, size K7/#4, incorporates a 24mm reflective surface with a round handle to support controlled laryngeal inspection.
The Gruber rhinoplasty retractor combines a wide 12mm blade with a detachable weight and integrated stainless steel chain anchor (140mm), enabling hands‑free nasal dorsum and septum exposure during open rhinoplasty. The Desmarres‑type mechanism allows secure positioning without continuous manual retraction, freeing both hands for surgical manipulation.
This 14mm laryngeal mirror (K2/#0) bridges the pediatric and small‑adult exam ranges, useful when the K1 size is too small but adult sizes crowd the oropharynx. The polished face holds image clarity, and the round handle stabilizes the examiner's grip.
This latex‑free silicone tubing replacement for the McIvor mouth gag at 6" length × 4.9mm diameter restores the cushioned bite surface that protects the patient's teeth during tonsillectomy and intraoral procedures. The latex‑free composition suits patients with latex sensitivity.
A 7 French (2.33mm) lumen makes this Frazier suction tube the next step up for moderate‑flow aspiration in sinus, otologic, and neurosurgical corridors. The 30 degrees angle keeps the handpiece below the line of sight, and the thumb‑plate cutoff hole lets the surgeon modulate suction without releasing the field. The included stylette clears clot or particulate from the bore, with a 100mm working length inside a 171mm overall length.
This Blair retractor includes four sharp 7mm prongs, a flat handle, and a 140mm length to support firm skin retraction in nasal and facial procedures.
The adenoid curette (reverse curved, size 0) is a compact instrument designed for gentle adenoid tissue removal in pediatric patients with smaller nasopharyngeal anatomy. The size 0 cup and reverse curvature allow controlled adenoid removal without nasopharyngeal wall trauma. The blunt geometry is particularly suited for small children where mucosal integrity is paramount.
This reverse curved adenoid curette size 1 provides controlled adenoid tissue removal during pediatric pharyngeal surgery. The smaller design suits young patients with narrower nasopharyngeal anatomy. Reverse curvature geometry enables pull-stroke evacuation of adenoid tissue.
The reverse-curved adenoid curette is engineered for controlled adenoid tissue removal during transoral adenoidectomy. The standard curve design follows the pharyngeal contour, enabling efficient stripping of adenoid tissue from the nasopharynx. Size 2 accommodates pediatric and smaller adult nasopharyngeal anatomy.
Reverse-curved adenoid curettes Size 3 provide alternative tissue-removal approaches during adenoidectomy, accommodating varied surgical strategies and anatomical presentations. The reverse geometry enables effective stroking from alternate nasopharyngeal angles, particularly useful in difficult cases or posterior adenoid extension. Curved design reduces inadvertent mucosal trauma during controlled tissue separation.
A Size 4 reverse-curved adenoid curette designed for larger nasopharyngeal anatomy and efficient adenoid removal in adult and adolescent patients. The standard curve follows the contour of the adenoid fossa, supporting controlled tissue stripping without mucosal trauma. Stainless steel ensures lasting clinical durability.
Engineered for broader cortical exposure during mastoid work, this straight Alexander chisel features a 10mm head that lifts wider bone segments per stroke. The 7-inch (178mm) shaft delivers the mallet impulse cleanly to the cutting edge, and the straight geometry tracks linear bone removal along the mastoid cortex. Stainless‑steel construction holds edge geometry through repeat autoclaving.
With a 12mm wide head, this Alexander mastoid chisel takes the broadest cortical lift in the series for rapid exposure during mastoidectomy. The straight profile and 7-inch (178mm) shaft transmit mallet force directly to the cutting edge, supporting decisive bone removal in the early stages of the approach. Stainless‑steel construction is built for repeat clinical use across many cases.
The larger Alexander mastoid chisel features a 14mm blade width to increase cutting surface during mastoid bone removal and cortex elevation. This wider profile reduces the number of strikes needed in dense bone, improving efficiency without sacrificing control. The straight 178mm shaft maintains the geometric reliability required for consistent performance across repeat procedures.
The Alexander mastoid chisel is designed with a straight, 4mm wide head for precise osteotomy and cortical bone removal during mastoid surgery and mastoidectomy. The blunt wide head distributes striking force across bone surface, minimizing crack propagation into adjacent temporal bone and labyrinth. At 7 inches, the length provides adequate leverage and control when used with an otologic mallet during controlled bone removal.
This Alexander mastoid chisel is designed for controlled bone removal during mastoid cortex elevation and mastoidectomy. The 6mm wide straight blade delivers precise chiseling force through dense temporal bone without slipping. Its 178mm overall length provides adequate reach and leverage for posterior auricular approaches to the mastoid compartment.
This straight Alexander mastoid chisel removes cortical bone during mastoidectomy and other otologic bone work. The 8mm wide head delivers controlled chip removal along the mastoid antrum, and the 7-inch (178mm) shaft balances mallet impact through the surgeon's grip. Hardened stainless‑steel construction retains a sharp edge across repeat sterilization cycles.
The 10mm Alexander mastoid gouge handles larger bone removal phases during mastoidectomy and middle ear re-entry. Its wider cutting surface reduces overall procedure time by covering larger bony areas per stroke. The straight 178mm shaft maintains leverage and control when navigating the mastoid cavity and epitympanic anatomy.
The widest Alexander mastoid gouge at 12mm blade width maximizes efficiency during extensive mastoid cavity creation and ossicular bed preparation. The gouge geometry channels bone fragments and reduces chatter, and the straight 178mm profile supports stable hand positioning throughout dense bone work. Built for lasting surgical reliability.
The Alexander mastoid gouge in straight configuration with 14mm blade width is engineered for controlled cortical and mastoid bone removal during mastoidectomy. The wide blade spreads force across cancellous bone, reducing split propagation and vibration. The 180mm length provides secure hand control during deep temporal bone work.