Your cart is empty!
The Vannas capsulotomy scissors in curved configuration combine sharp pointed tips with 6mm blades and an 8.75mm mid‑screw‑to‑tip geometry for controlled anterior capsule management during phacoemulsification. The serrated handle ensures secure grip during delicate capsular work, while the polished finish minimizes tissue friction. The curved design enhances access to the posterior capsule if needed.
Features & Benefits
This straight 27ga anterior chamber cannula provides a 22mm (7/8 inch) shaft for delicate intraocular fluid delivery and viscoelastic placement. The fine gauge minimizes turbulence and corneal wound distortion, supporting precise work in chamber maintenance and IOL implantation. The straight profile preserves a direct working axis.
This hydrodissection cannula features a 30ga flat tip with an 8mm tip‑to‑bend geometry and a 20mm overall length for gentle, low‑resistance hydrodissection in shallow working spaces.
A fine 0.25mm working tip makes this Sinskey hook well suited to IOL dialing and iris manipulation through small incisions. The straight shaft preserves a direct approach, and the round knurled handle gives the rolling tactile feedback surgeons rely on during lens rotation. The 110mm overall length keeps the working hand clear of the orbital rim.
The Shepard‑Whitman double‑ended capsule polisher features angled anterior and posterior rings at 1.75mm diameter with semi‑sharp working edges for controlled removal of cortical lens material. The paired left and right angled configurations allow intuitive access to all capsular meridians without repositioning. Overall length of 146mm and round handle geometry support stable ergonomic control during polishing.
Swiss jeweler forceps in the #3C pattern present extra‑fine pointed tips with a 0.17mm tip width for the most delicate ophthalmic handling � single suture grasping, membrane peeling rehearsal, and intraocular foreign body work at the slit lamp. Straight shafts and a smooth handle keep the grip neutral across the 110mm length, and a dull finish controls glare during microscope use.
This Knapp lacrimal retractor uses four sharp prongs to engage and hold periorbital tissue during dacryocystorhinostomy and other lacrimal sac procedures. The straight 127mm shaft balances reach with hand stability, and the rake geometry provides firm but localized retraction near the medial canthus. Polished stainless steel resists corrosion across reprocessing cycles.
Castroviejo corneal section scissors with wide handle provide excellent ergonomic control during extended corneal incision work. The curved right geometry positions the blades optimally at the corneal-scleral junction, while blunt tips maintain safety throughout the procedure. Polished finish and 10mm mid‑screw-to-tip measurement support fine, controlled separation.
Fine straight stitch scissors with sharp tips and 17mm blades from mid‑screw, sized for precise suture division during ophthalmic closure. The flat spring handle returns the blades cleanly between cuts, and the compact 107mm length supports a controlled, close‑in cutting motion.
The Barraquer infant speculum uses 8mm closed‑wire blades and a 16mm spread to retract neonatal lids without crowding a small orbit. The compact 36mm overall length keeps the frame clear of the microscope, and the dull finish suppresses glare. The closed‑wire profile distributes pressure gently across thin infant tissue.
This extra‑delicate curved needle holder uses 6mm jaws without a lock and a longitudinally serrated handle to support precise microsuture placement where minimal bulk and high tactile sensitivity are required.
Sized at 5.75mm, the Bores O‑Z marker rounds out the upper mid‑range of the refractive set, stamping a broad optical‑zone ring used for larger ablation profiles. The smooth handle on the 102mm straight stainless‑steel shaft indexes against the thumb, and the polished face releases pigment evenly along the epithelial surface.
Designed for retrobulbar and peribulbar block delivery, this 23ga Atkinson needle provides a 7/8 inch shaft for measured advancement around the globe. The Atkinson tip geometry blunts the bevel to reduce vascular trauma while maintaining tactile feedback as the needle passes through orbital tissue. The gauge balances anesthetic flow with controlled placement.
These Bishop‑Harmon dressing forceps carry straight serrated tips on a flat three‑hole handle for fine tissue and dressing handling at the lid and conjunctiva. The compact 85mm body suits microsurgical setups where standard tissue forceps would overshoot the working field.
These titanium Harms‑Colibri forceps incorporate 0.12mm 1×2 teeth with tying platforms and a short 17×5.5mm grip cut‑out. The 76mm profile supports controlled corneal suturing and fine anterior segment grasping dynamics.
Slightly curved Barraquer cilia forceps carry a 6mm long tying platform for both lash handling and 10‑0 suture tying during microsurgical closure. The gentle curve clears the line of sight to the platform, and the serrated handle gives a controlled rolling grip. The 109mm overall length sits between the fingers for sustained microsurgical work.
The Helveston Great Big Barbie retractor uses a heavily curved 11mm thin blade to lift and protect surrounding tissue during strabismus surgery. The wide blade distributes retraction force across the conjunctiva and Tenon's capsule, while the heavy curve hugs the globe contour for stable exposure of the rectus muscle insertions.
Featuring a J‑shaped working tip on a straight 25ga, 22mm (7/8 inch) shaft, this cannula supports directional fluid delivery and viscoelastic placement in confined anterior segment work. The J bend redirects flow laterally, useful for cleaning beneath the iris or seating an IOL haptic. The slim shaft passes cleanly through standard side‑port incisions.
The Castroviejo needle holder is the standard precision driver of ophthalmic suturing, and this straight medium‑jaw version carries a 12mm jaw with locking mechanism for 8‑0 through 10‑0 needles. The lock holds the needle without surgeon attention while position is adjusted, and the 140mm frame balances comfortably in the microsurgical grip.
This Thornton swivel fixation ring in titanium incorporates 13mm × 7mm swivel geometry for secure corneal fixation with rotational flexibility. The open-ring design with swivel capability supports varied surgical approaches during complex refractive procedures.
This 13mm long trephine serves the larger end of the graft spectrum in penetrating keratoplasty. Disposable design eliminates blade degradation across multiple cuts, ensuring consistent graft margin quality and epithelial alignment on each use. Pre-sterilized individual pouches support rapid surgical workflow.
Castroviejo suturing forceps are precision instruments for ophthalmic knot tying and suture manipulation. The 1 × 2 tooth interlocking pattern and 5.5mm tying platform provide secure suture grasp without tissue trauma. A wide serrated handle ensures stable control during delicate tying maneuvers.
The Lindstrom LASIK cannula features a 25ga formed shaft with three ports for distributed irrigation beneath the corneal flap. The triple‑port arrangement diffuses balanced salt solution along the stromal interface to clear debris without jetting at the flap edge. Pre‑formed contour preserves alignment with the corneal surface.
The Algerbrush II is a battery‑operated motorized handpiece used to remove corneal rust rings and residual pterygium tissue. A single‑speed motor drives a 3.5mm round diamond burr at medium grit, with a tip cover protecting the burr between uses. The unit runs on a single AA battery, and the 105mm body suits handheld corneal work.
The Beehler pupil dilator with three prongs and flexible curved fingers enables one‑handed manipulation of the iris during phacoemulsification and other anterior segment procedures. The flexible prongs conform to iris contours without tissue trauma, while the hook‑style entry facilitates easy pupil engagement. At 130mm, the instrument reaches across the anterior chamber with comfortable hand positioning.
Insulated and sized for everyday lid eversion, the Desmarres lid retractor pulls the upper or lower lid clear for examination, foreign body removal, and lid margin surgery. The Size 1 13mm wide blade suits narrow palpebral fissures, and the flat handle gives steady single-finger leverage. Insulation isolates the instrument during adjacent electrosurgery, while the matte finish dampens glare.
This IOL loading forceps is engineered specifically for AcrySof intraocular lens placement into Monarch II and III injector cartridges. Titanium construction with highly polished tip surfaces prevents lens scratching during loading and repositioning. The straight 119mm shaft with round handle provides controlled bimanual access to cartridge ports, essential for predictable IOL placement in small‑incision cases.
Sized at 7.75mm, this long disposable trephine sits between the most common keratoplasty graft sizes for surgeons who need that intermediate diameter. The single‑use stainless blade preserves first‑pass sharpness, and the extended handle stabilizes the cutting stroke.
Sized for minimal footprint on the lid margin, this Barraquer wire speculum uses 10mm closed wire blades with a 19mm spread to hold the lids open while preserving access to the limbus. The wire construction reduces weight against the periorbital skin, and the dull 35mm body sits below the microscope's reflective range. It suits short anterior segment cases where speculum bulk matters.
The Troutman-Barraquer utility forceps in 0.12mm ultra-fine stainless steel tips captures delicate corneal tissue or wound edge during phacoemulsification and anterior segment closure. Colibri-style geometry provides atraumatic purchase with minimal tissue drag. 1 × 2 interlocking tooth configuration locks wound edges or capsular flaps without incision extension. Serrated handle and 75mm compact length support precise micro-manipulation.