Your cart is empty!
This Rosen chopper incorporates a blunt tip with a 45-degree interior cutting edge to support controlled nucleus division during phacoemulsification. The angled 9mm bend-to-tip geometry and round knurled handle enhance precision maneuvering within the anterior chamber. Stainless steel construction provides reliable performance across cases with efficient reprocessing and sustained durability.
Features & Benefits
This 25‑gauge curved lacrimal cannula at 28mm working length delivers irrigation to the lacrimal canalicular system during evaluation of nasolacrimal patency and dacryocystorhinostomy planning. The curved profile follows the canalicular anatomy, and the sterile single‑use format preserves cleanliness.
Exceptional durability is combined with access to extreme chamber angles during complex anterior segment procedures in a titanium Binkhorst‑pattern I/A tip. The 150‑degree angle and 0.5mm port enable unconventional surgical approaches while titanium construction resists corrosion across repeated sterilization. The 45mm length provides stable reach.
This left-hand Chang phaco chopper is double-ended, with each tip angled 10mm from bend to tip. The knurled handle enhances control, while the 130mm overall length supports stable maneuvering within the anterior chamber.
The Shepard capsule polisher is designed for controlled removal of cortical lens material and polish residue from the anterior and posterior capsule following nucleus expression. Its 1.75mm ring‑tip geometry and angled 10mm bend provide the precise sweep motion needed to preserve capsular integrity while clearing debris. The round handle design allows natural finger positioning throughout the case.
The Bishop‑Harmon irrigating cannula delivers measured anterior segment irrigation through a 19ga lumen, well suited to chamber re-formation and washout during cataract and corneal work. Its single‑use sterile format eliminates lumen‑clog risk associated with reprocessed irrigators. Compatible with standard luer syringes for surgeon‑controlled flow.
Sized 1/2, this Bowman lacrimal probe pairs the two smallest gauges on a single double‑ended shaft for graduated probing of the canalicular system. The 142mm overall length keeps fingertip orientation near the lid margin while the tapered tip negotiates the punctum and common canaliculus.
Built for fine tenotomy and superficial ocular dissection, these straight Stevens scissors carry blunt tips and a 19mm mid‑screw to tip working length. The ribbon‑style ring handle offers a light, balanced feel for sustained microsurgical use, and the 112mm overall length keeps the cutting plane close to the field. Blunt points reduce the risk of inadvertent penetration near delicate tissues.
This replacement 1mm carbide burr chuck fits the Algerbrush II for corneal foreign body and rust ring removal. The 16.5 × 1.59mm shaft seats into the handpiece collet and presents a 1mm tungsten‑carbide tip with a 20.5mm overall length, restoring cutting action when the original burr is worn or contaminated.
Littauer cilia forceps carry a bowed‑out, inverted‑triangular tip with a serrated jaw beveled along the outside, providing secure purchase on individual lashes for epilation of trichiatic cilia. The 89mm overall length keeps the working tip close to the surgeon's fingertips for tactile control.
Pairing a Seibel‑style chopping end with a 25mm Connor wand‑style ball manipulator, this titanium combo instrument covers nucleus segmentation and IOL positioning in one pass. The 45‑degree angled shaft and 10mm bend‑to‑tip set up clean chopping geometry inside the capsular bag, while the 21mm working length of the manipulator side suits cortex sweeping and optic centration after lens insertion. Titanium construction keeps the 140mm shaft light and corrosion‑resistant across repeat autoclave cycles.
Desmarres chalazion forceps stabilize and isolate a lid lesion during incision and curettage. The 24mm oval solid lower plate supports the everted lid, while the open upper plate frames the cyst within an inside dimension of 12 × 20mm for direct access. A locking thumb screw holds tension during the procedure, freeing the surgeon's second hand.
Sized at 8.5mm, this long disposable trephine cuts donor buttons or recipient beds at one of the most commonly used keratoplasty diameters. The single‑use stainless blade arrives sterile in an individual pouch, removing reprocessing variability and protecting edge sharpness for a precise first‑pass cut.
A 27ga lumen paired with an 11mm bend‑to‑tip gives this anterior chamber cannula extended cross‑chamber reach for irrigation or trapped‑viscoelastic removal. The longer bend places the outlet near the angle while the fine gauge preserves a low‑turbulence stream.
This 23‑gauge MVR blade is a single‑use sterile instrument designed for controlled pars plana puncture during micro‑incision vitreoretinal surgery. The straight profile delivers consistent blade sharpness case‑to‑case, eliminating the variability inherent in reusable instruments. Disposable sterility ensures no edge degradation across the procedure.
This extra‑delicate curved needle holder uses 6mm jaws without a lock and a longitudinally serrated handle to support precise microsuture placement where minimal bulk and high tactile sensitivity are required.
Sized at 5.75mm, the Bores O‑Z marker rounds out the upper mid‑range of the refractive set, stamping a broad optical‑zone ring used for larger ablation profiles. The smooth handle on the 102mm straight stainless‑steel shaft indexes against the thumb, and the polished face releases pigment evenly along the epithelial surface.
Designed for retrobulbar and peribulbar block delivery, this 23ga Atkinson needle provides a 7/8 inch shaft for measured advancement around the globe. The Atkinson tip geometry blunts the bevel to reduce vascular trauma while maintaining tactile feedback as the needle passes through orbital tissue. The gauge balances anesthetic flow with controlled placement.
These Bishop‑Harmon dressing forceps carry straight serrated tips on a flat three‑hole handle for fine tissue and dressing handling at the lid and conjunctiva. The compact 85mm body suits microsurgical setups where standard tissue forceps would overshoot the working field.
These titanium Harms‑Colibri forceps incorporate 0.12mm 1×2 teeth with tying platforms and a short 17×5.5mm grip cut‑out. The 76mm profile supports controlled corneal suturing and fine anterior segment grasping dynamics.
Compact at 36mm overall, this Barraquer speculum uses 10mm closed wire blades to retract the lids during anterior segment microsurgery. The 15mm spread sets a controlled fissure opening, and the dull finish limits microscope glare. Closed wire geometry distributes pressure smoothly along the lid margin without snagging lashes.
The Vannas capsulotomy scissors in curved configuration combine sharp pointed tips with 6mm blades and an 8.75mm mid‑screw‑to‑tip geometry for controlled anterior capsule management during phacoemulsification. The serrated handle ensures secure grip during delicate capsular work, while the polished finish minimizes tissue friction. The curved design enhances access to the posterior capsule if needed.
This straight 27ga anterior chamber cannula provides a 22mm (7/8 inch) shaft for delicate intraocular fluid delivery and viscoelastic placement. The fine gauge minimizes turbulence and corneal wound distortion, supporting precise work in chamber maintenance and IOL implantation. The straight profile preserves a direct working axis.
This hydrodissection cannula features a 30ga flat tip with an 8mm tip‑to‑bend geometry and a 20mm overall length for gentle, low‑resistance hydrodissection in shallow working spaces.
A fine 0.25mm working tip makes this Sinskey hook well suited to IOL dialing and iris manipulation through small incisions. The straight shaft preserves a direct approach, and the round knurled handle gives the rolling tactile feedback surgeons rely on during lens rotation. The 110mm overall length keeps the working hand clear of the orbital rim.
The Shepard‑Whitman double‑ended capsule polisher features angled anterior and posterior rings at 1.75mm diameter with semi‑sharp working edges for controlled removal of cortical lens material. The paired left and right angled configurations allow intuitive access to all capsular meridians without repositioning. Overall length of 146mm and round handle geometry support stable ergonomic control during polishing.
Swiss jeweler forceps in the #3C pattern present extra‑fine pointed tips with a 0.17mm tip width for the most delicate ophthalmic handling � single suture grasping, membrane peeling rehearsal, and intraocular foreign body work at the slit lamp. Straight shafts and a smooth handle keep the grip neutral across the 110mm length, and a dull finish controls glare during microscope use.
This Knapp lacrimal retractor uses four sharp prongs to engage and hold periorbital tissue during dacryocystorhinostomy and other lacrimal sac procedures. The straight 127mm shaft balances reach with hand stability, and the rake geometry provides firm but localized retraction near the medial canthus. Polished stainless steel resists corrosion across reprocessing cycles.
Castroviejo corneal section scissors with wide handle provide excellent ergonomic control during extended corneal incision work. The curved right geometry positions the blades optimally at the corneal-scleral junction, while blunt tips maintain safety throughout the procedure. Polished finish and 10mm mid‑screw-to-tip measurement support fine, controlled separation.
The Barraquer infant speculum uses 8mm closed‑wire blades and a 16mm spread to retract neonatal lids without crowding a small orbit. The compact 36mm overall length keeps the frame clear of the microscope, and the dull finish suppresses glare. The closed‑wire profile distributes pressure gently across thin infant tissue.