Your cart is empty!
This Knolle lens nucleus spatula is designed for anterior chamber nucleus management during phacoemulsification. Its flat-curved 1mm blade geometry accommodates depths within the anterior chamber, while the etched 7mm, 6mm, and 5mm marks guide blade positioning relative to the nucleus equator. The polished finish minimizes material adherence, supporting clean cortical-nucleus separation.
Features & Benefits
This Knolle lens nucleus spatula features a straight, malleable 0.5mm wide blade for gentle nucleus support and manipulation. The knurled handle improves tactile feedback during lens mobilization.
The Knolle needle holder is a fine instrument featuring 10mm gently curved jaws with a locking serrated flat handle, designed for secure needle positioning during extended ophthalmic suturing. The fine jaw geometry supports precise needle control in corneal and limbal closures. Extended 144mm length enables reach across broader surgical fields.
The Knolle needle holder provides straight-shaft access with lock mechanism for secure needle and suture grasp. Its fine 12mm jaws and 145mm overall length support extended reach to posterior wound margins, while the serrated flat handle and 18mm screw-to-tip measurement enable precise needle positioning. The lock mechanism prevents suture slipping during dynamic knot placement.
The Knolle-Kelman cystotome delivers fine, controlled puncture into the anterior capsule during cataract surgery. At 22 gauge with a sharp tip, this tool creates a small opening for hydrodissection and subsequent capsulotomy. The compact 50mm length supports precise fingertip control in the anterior chamber.
This LASIK aspirating speculum features six aspirating holes per blade arrayed across 62mm × 11mm blade surfaces. The ports maintain consistent ocular suction and provide hemostasis during flap creation and excimer ablation. Stainless steel construction ensures reliable reprocessing between refractive procedures.
The Kobayakawa middle speculum is a compact eyelid retractor optimized for standard and phaco procedures. Its 14mm blade geometry provides adequate exposure while minimizing disruption to the lid margin and conjunctiva. The shorter overall length enhances surgical access in patients with shallow orbits or anatomical constraints.
The Koch Cionni open‑blade speculum features flat 13.5mm blades angled nasally, providing wide atraumatic lid retraction during anterior segment and cataract procedures. The open‑blade design (no wire closure) simplifies insertion and positioning while maintaining consistent exposure geometry. Flat blade surfaces distribute pressure evenly across the eyelid margin.
A slightly curved duckbill tip defines this Koch lens nucleus spatula, supporting sculpting and gentle nucleus manipulation in cataract surgery. The single-ended notch-free profile glides under the nucleus without catching capsular tissue, suiting divide-and-conquer or chop techniques.
The Koch lens nucleus spatula combines a single-ended design with a slightly curved geometry and duckbill tip for controlled nuclear manipulation during phacoemulsification. The gentle curve enhances visibility during nucleus positioning and rotation. Stainless steel construction provides lasting durability across many cataract cases.
The Koch nucleus spatula tapers to a duckbill‑shaped 1mm tip with notches that engage the nuclear surface during rotation and manipulation. A gentle curve aligns the working end with the capsular bag during phacoemulsification. The round knurled handle supplies the fine rotational feedback needed for controlled chop and split maneuvers.
The Koch phaco chopper is engineered from titanium for controlled nuclear manipulation during phacoemulsification. This tool delivers the force necessary to divide the lens nucleus into manageable segments. Titanium construction ensures reliability and precision across repeated cases.
Designed to enter a side‑port stab incision during phacoemulsification, the Koch spatula carries a broad duckbill tip that supports nucleus rotation and second‑instrument manipulation. The round knurled handle gives reliable rotational feedback, and the 117mm overall length keeps the working tip in clear microscope view.
The Koch phacoemulsification spatula enters cleanly through a side‑port stab incision with its distinctive duckbill geometry and broad, rounded tip. This design supports nucleus manipulation and fragment positioning without corneal pressure, essential in densely‑sclerotic cataract cases. The curved shaft and knurled handle enhance tactile feedback during delicate maneuvers.
The Koch spatula/Nagahara chopper is a double-ended instrument combining two distinct nucleus-fragmenting profiles for phacoemulsification. The Koch spatula end features a 0.8mm duckbill-shaped tip for gentle subcapsular dissection, while the Nagahara chopper end provides 1mm cutting edge at 60 degrees for controlled nuclear division. The 126mm shaft and round knurled handle support sustained grip during extended cases.
The Koch Stop Chop manipulator is engineered for crater-sculpting and nuclear fragment mobilization during phacoemulsification. Its angled 1.5mm shaft allows the surgeon to place the tip deep within the nucleus while maintaining clear visualization and phaco-hand position. The compact design supports efficient chopping sequences with minimal anterior chamber disturbance.
The Koch stop chop manipulator executes the signature divide‑and‑conquer technique with precision across the anterior chamber. The 1.5mm fine tip achieves rapid, controlled nucleofragment division while the angled shaft and round handle maintain ergonomic control even in narrow fields. This short 70mm design supports rapid chopping cycles.
This Koch‑Minami phaco chopper incorporates a 0.5mm olive‑shaped tip with an 11mm bend‑to‑tip distance and a round stainless steel handle for controlled phaco manipulation.
This double-ended Koch‑Nagahara chopper and duckbill spatula integrates a 1mm angled cutting wedge on one end and a rounded, curved 0.8mm spatula on the other. It supports both nucleus chopping and lens manipulation in a single instrument.
The Koeppe diagnostic gonioscopy lens in extra small (12mm) size provides angle visualization in pediatric and narrow anterior chamber patients. The glass optics deliver clear magnified views of the trabecular meshwork and angle structures. Its compact size minimizes patient discomfort during examination.
The Koeppe diagnostic gonioscopy lens in large size (19mm) supports angle examination and therapy in standard and wide anterior chamber patients. The glass optics provide stable magnified visualization of the entire angle during gonioscopy. Its reusable design supports frequent clinical and operative use.
The Koshima micro Vannas scissors combine straight geometry with extra-delicate 14.5mm blades for ultra-fine microsurgical dissection in ophthalmic and reconstructive cases. The ultra-fine pattern minimizes tissue trauma while delivering precise cutting control. Stainless steel edges support repeated use and sterilization.
Kraff's capsule polishing curette removes lens epithelial cell remnants after capsulorhexis with gentle, irrigating precision. The 25-gauge 1.75mm cup features semi-sharp edges that debride the capsular bag without excessive force, while the center port delivers irrigant simultaneously to maintain clarity and reduce trauma. Its 28mm working length ensures proper access in anterior chamber work.
The Kraff capsulorhexis utrata forceps delivers extra-fine tip control for creating a continuous curvilinear capsulorhexis in cataract surgery. The 13mm bend-to-tip measurement optimizes approach angles for anterior capsular engagement, while the slender instrument geometry supports precision grasping through small corneal incisions. At 102mm overall length, it balances reach with delicate handling.
The Kraff nasal adjustable speculum positions on the nasal side of the eye, holding the lids open while clearing the temporal field for the surgeon's working hand during clear‑corneal cataract surgery. The 14mm solid blades give firm retraction, and the adjustable mechanism lets the surgeon dial in lid tension before docking the case.
This Kraff temple adjustable speculum offers surgical flexibility for varying eyelid anatomy while maintaining the stability surgeons expect from the Kraff geometry. The 14mm solid blades accommodate standard anterior chamber access, and the adjustable mechanism permits field customization during phacoemulsification or refractive procedures. The 30mm spread provides adequate working room.
The Kraff temple speculum is a workhorse design for phacoemulsification and routine anterior segment surgery. The 14mm solid blades provide ample space for phaco handpiece and IOL implantation, while the compact 60mm length allows stable positioning. The non-adjustable jaw configuration ensures consistency across repeated cases.
These Kraff Utrata capsulorhexis forceps incorporate recessed titanium jaws with a sharp tip and 1mm laser lines for intraoperative reference. The design supports controlled capsular flap advancement during continuous tear creation.
The Kraff Utrata forceps is a precision capsulorhexis instrument designed for controlled anterior capsule manipulation. Its 11mm bend-to-tip geometry provides ergonomic access to the capsular rim during cataract surgery. The round handle supports tactile control and reduced finger fatigue during extended procedures.
This Kraff‑Utrata capsulorhexis forceps features titanium construction and angled blunt tips for controlled anterior capsular opening during phacoemulsification. The round handle and compact 102mm length support fingertip control and tactile feedback at the limbus and capsular edge. Titanium composition resists corrosion and maintains edge sharpness across repeated cases.