Your cart is empty!
This straight titanium I/A tip is paired with a silicone sleeve for sealed irrigation and aspiration during phacoemulsification, with a 0.3mm port and 47mm overall length. The straight shaft suits standard clear‑corneal entry, while the silicone sleeve protects the wound during cortex removal and posterior capsule polishing. Titanium construction supports reliable performance across repeated reprocessing cycles.
Features & Benefits
Smooth, atraumatic anterior chamber contact during nucleus and epithelial cleanup is provided by a titanium straight I/A tip with integrated silicone sleeve. Titanium construction combined with silicone covering resists corrosion while reducing incisional trauma. The 0.5mm port and 45mm length enable comprehensive chamber access.
Enhanced durability across repeated sterilization cycles is combined with fine irrigation control in a titanium straight I/A tip with 0.5mm port. Titanium construction offers superior corrosion resistance while maintaining consistent bore geometry throughout many cases. The 45mm length provides adequate chamber reach.
These ICL cartridge loading forceps include an angled design with an 11mm long smooth jaw and a three‑hole handle. The 108mm length supports controlled approach for precise ICL cartridge loading.
These ICL cartridge removal forceps feature an angled 11mm shaft with a finely textured jaw for secure cartridge extraction. The three‑hole handle enhances grip stability during removal maneuvers.
The Ikuno-Hata adjustable eye speculum incorporates both round blades and integrated aspiration for complex anterior segment procedures such as DMEK graft insertion or posterior limbal keratoplasty with nasal approach access. The adjustable slide-type mechanism permits dynamic field customization during delicate Descemet's layer work.
Designed for internal limiting membrane (ILM) peeling during vitreoretinal surgery, this 23‑gauge grasping forceps delivers controlled ILM engagement through its fine 0.6mm tip. The titanium squeeze handle provides ergonomic, single‑hand operation during delicate posterior capsule and epiretinal membrane removal. Titanium construction combines rigidity with superior corrosion resistance.
The Inamura capsulorhexis forceps in titanium features sharp pointed serrated tips angled 45 degrees from a curved shaft with a 10.5mm tip‑to‑pivot distance. The cross‑action geometry enables entry through 1.8mm incisions while maintaining crisp tip control during capsule engagement. The flat ergonomic handle and titanium construction support durability and reduced hand stress.
This Inamura Eagle Beak prechopper is designed for grade 1‑4 nuclei and features a narrow tip for insertion into denser nuclear tissue. The tip geometry enhances nucleus rotation within the capsular bag during mechanical division.
Optimized for left-handed surgeons, this Inamura nucleus divider/manipulator combines chopping and supporting functions in a single instrument. The hybrid design simplifies instrument exchanges during phacoemulsification while supporting controlled nucleus disassembly. Stainless steel reusable construction suits integration into standard sterilization trays.
This large infant self‑retaining retractor opens the eyelid aperture in neonatal and pediatric ophthalmic procedures. Round wire blades sit gently on the lid margins, and the 9mm blade length matches infant proportions. The compact 38mm body keeps the field free of bulky hardware during microscope work.
This infant-sized self-retaining retractor is configured for pediatric anterior segment surgery where delicate tissue handling and minimal surgical footprint are essential. The round wire blades (8mm length) provide hands-free eyelid and periocular tissue retraction without crush injury. The 38mm overall size matches neonatal and infant orbit anatomy.
This infant wire speculum carries a U‑shaped end angled slightly upward, lifting the upper lid clear of the cornea without crowding the field. The 4mm round wire blades and 20mm spread match newborn palpebral dimensions, and the 38mm frame keeps the speculum compact against small faces during examinations and minor procedures.
This infusion adaptor is engineered as a compatible accessory component for specified ophthalmic infusion handles, supporting fluid delivery integration in anterior segment and phacoemulsification surgery. The precision fit design ensures secure connection without leakage during sustained irrigation. Reusable construction supports routine sterilization and multiple cases.
Designed for anterior chamber irrigation during cataract and anterior segment work, this 20ga infusion cannula delivers a steady fluid column through a 6mm tip. The fine gauge supports paracentesis entry without over-enlarging the wound, and the polished shaft slides cleanly through cornea or scleral tunnel. Stainless steel build withstands repeat autoclave cycles across reusable case loads.
This 20ga infusion cannula features a self-retaining tip design with 7mm bend-to-tip geometry for stable placement during vitreoretinal or anterior segment procedures. The self-retaining mechanism anchors the cannula within the sclerotomy or incision, enabling sustained balanced salt solution delivery without manual holding. Reusable stainless steel construction supports multiple cases.
Male‑to‑female connection geometry enables rapid adapter securement between irrigation tubing and anterior chamber maintainer or infusion cannula. The plastic construction minimizes glare and thermal conductivity during prolonged surgical use. Sterile single‑use delivery ensures field‑ready performance without presterilization handling.
This stainless‑steel infusion handle uses a male‑to‑female connector in a 100mm format to interface between mixed connector types.
This stainless‑steel infusion handle incorporates a male‑to‑male connector with a 100mm length to bridge compatible infusion components.
This stainless‑steel infusion handle uses a male‑to‑tubing connector and a 115mm length to support stable attachment of infusion cannulas.
This intra‑operative toric axis marker, titanium, features a 13.5mm outer diameter, 10.5mm inner marks, and a rotatable axis marker aligned at 90 degrees for toric reference marking.
The intracapsular ring injector combines a titanium body with a 0.3mm steel hook and plunger mechanism to precisely deliver PMMA or silicone rings into the capsular bag during corneal refractive surgery. The fine hook geometry supports safe ring placement without capsular trauma. Its 162mm length enables accessible capsular positioning.
These intraocular grasping forceps feature serrated 1mm tips and a 150mm overall length, providing extended reach and stable grasping for small intraocular fragments.
Vitreoretinal and posterior segment cutting in pars plana and vitreous cavity work is enabled by the intraocular scissors. Its curved 4mm blade with integrated protective cover supports precise membrane and vitreous dissection. The 146mm extended length provides reach into the posterior segment while maintaining blade control.
These intraocular scissors are engineered for delicate internal ophthalmic dissection within confined anterior chamber spaces. The straight profile and narrow 3mm blades enable fine, controlled cuts along tissue planes with excellent visualization. Serrated edges on both blades improve grip on delicate membranes, while the tubular shaft geometry preserves space and prevents handle collision with microscope optics.
These straight intraocular scissors include a 4mm microblade assembly protected by an integrated cover to prevent inadvertent anterior chamber contact. The 146mm profile increases reach for cutting fine membrane strands or capsule tags with stable linear control.
The intrascleral haptic marker and Yamane double needle stabilizer work together to localize and mark haptic position during ab interno IOL fixation procedures. The stainless‑steel instrument marks the sclera at planned fixation sites and stabilizes the double needle technique during sutureless intraocular lens implantation. This specialized tool supports emerging techniques in aphakic and IOL repositioning cases.
The IOL forceps features paddle jaw design with three‑hole handle suited to secure IOL grasping and positioning during cataract extraction and implantation. The broad paddle surface distributes grasping force across the IOL optic, preventing indentation or damage. The three‑hole handle provides stable fingertip control during insertion maneuvers.
IOL glide sheets facilitate smooth, atraumatic intraocular lens delivery during cataract surgery. The 35 × 5mm surface with 2.5mm radius and 6mm thickness provides a conform surface that cradles and supports the IOL during insertion. The disposable format eliminates the need for tray sterilization, improving case preparation efficiency.
The IOL implant forceps features biconvex jaws shaped to cradle and stabilize intraocular lenses during insertion into the capsular bag. Its angled 7.5mm bend to tip optimizes chamber access without corneal contact, and the flat square handle provides broad grip support for controlled IOL positioning. Titanium construction ensures lasting durability across repeated lens implantation cases.