Your cart is empty!
This Castroviejo marking caliper serves the specialized role of measuring corneal diameter or astigmatic axis during cataract and refractive procedures. Curved shafts reduce hand fatigue and improve ergonomic reach, while groove detailing and dual-side scale readings (0‑20mm in 1mm increments) allow rapid documentation of surgical measurements without instrument repositioning.
Features & Benefits
This miniature Castroviejo corneal scissors model is built for fine corneal cutting in tight anterior segment fields. Blunt tips reduce the risk of stromal or endothelial injury during graft trimming and corneal section work, and the 11mm mid‑screw to tip dimension keeps the cutting blades short and controllable. A serrated flat handle supports precise fingertip pressure across the 106mm body.
This Castroviejo utility-stitch scissor combines curved-blade geometry with very small sharp tips for suture trimming and corneal margin work. The 124mm length with serrated wide handle supports controlled cutting during wound edge preparation and fine stitch removal. The polished finish and sharp blade profile enable clean dissection without snagging delicate tissue.
This curved Castroviejo needle holder incorporates 11mm smooth jaws and an integral locking mechanism for secure suture and needle control during anterior segment closure. The gentle curve follows the surgeon's natural hand arc and aids visibility in confined orbital and scleral spaces. A flat serrated handle improves grip security during wet-field suturing.
The gentle curve on this Castroviejo needle holder lets the surgeon approach scleral and limbal pass points without obscuring the suture path. Its 13mm delicate jaws hold fine ophthalmic needles with the precise grip the pattern was designed for, and the lock secures the needle between rotations. A serrated 140mm handle supports the fingertip roll used during continuous corneal suturing.
This Castroviejo needle holder uses a curved delicate jaw profile with a lock and a 13mm mid‑screw‑to‑tip distance for precise microsuture placement. The configuration supports fine controlled rotation.
This curved Castroviejo needle holder brings delicate precision to ophthalmic microsurgical closure. The gentle curve aligns naturally with corneal and conjunctival suturing angles, while the delicate tip (without lock) allows tactile needle feedback. The serrated 140mm handle distributes grip pressure across the palm during sustained microsurgical suturing.
The Castroviejo needle holder's curved 9mm fine jaws deliver precise needle control during anterior segment microsurgery. Its wide, serrated handle ensures secure grip during delicate suturing at the cornea, iris, and capsule. The gentle curve supports intuitive tip orientation without wrist torque, enabling consistent needle positioning across multiple passes.
This Castroviejo needle holder features a curved medium 12mm jaw and a lock, with a 15mm mid‑screw‑to‑tip length optimized for general ophthalmic suturing tasks.
Curved jaws and a built‑in lock define this 147mm Castroviejo needle holder, sized for corneal and scleral suturing with fine ophthalmic needles. The curve follows the natural arc of the needle, and the locking mechanism holds the needle steady during knot rotation.
Delicate jaws and a gentle curve on the Castroviejo needle holder allow controlled driving of microsurgical needles through cornea and conjunctiva. The 13mm mid‑screw‑to‑tip span carries a fine tip pattern for spatulated 10‑0 needles, while the locking mechanism stabilizes the needle between bites. A serrated handle anchors the 140mm stainless‑steel instrument in pinch grip.
Built for ophthalmic suturing precision, this Castroviejo needle holder pairs medium 11mm gently curved jaws with an internal lock to secure fine needles between passes. The curvature follows the natural arc of corneal and scleral suturing while keeping the tip in clear view. A serrated flat handle delivers controlled compression through repeated throws.
Heavier than the standard pattern, this Castroviejo needle holder handles larger scleral and lid sutures that fine models cannot rotate comfortably. Sixteen‑millimeter straight jaws grip the needle squarely, and a small lock holds it between throws. The flat serrated handle reads at 148mm, lengthened to give the wrist more leverage during through‑and‑through scleral passes.
These straight Castroviejo needle holders are built for placing fine corneal and scleral sutures with the precision the pattern is known for. The delicate 15mm jaws grasp 10‑0 nylon cleanly, and the internal lock holds the needle steady between throws. A serrated 140mm handle delivers tactile rotation under the operating microscope without slipping in gloved fingers.
This Castroviejo needle holder delivers straight delicate jaws with a 15mm mid‑screw‑to‑tip working length for precise microsuture placement. The lock‑free action allows fluid pickup and release of fine needles, while the serrated handle gives a confident pinch grip during knotting. At 140mm overall the holder balances comfortably in the surgeon's hand.
This straight Castroviejo needle holder delivers extra-delicate 1.2mm tips for microsurgical precision during ophthalmic suturing. The 10.5mm smooth jaws distribute needle contact pressure evenly, while the flat serrated handle and spring mechanism enable controlled needle release. Built for sustained corneal and conjunctival closure across repeat surgical cases.
Sized for slightly larger ophthalmic needles, this straight Castroviejo holder carries 12mm fine jaws without a locking mechanism � preserving continuous tactile feedback throughout each throw. The flat serrated handle supports a balanced rolling grip across the 136mm length for corneal and scleral suturing.
This straight Castroviejo needle holder closes on fine ophthalmic needles in 9mm jaws with a locking mechanism, freeing the surgeon's hand between throws. The serrated wide handle delivers a stable rolling grip across the 130mm length, supporting precise needle placement during corneal and conjunctival suturing.
This heavy‑duty Castroviejo needle holder carries 12mm jaws built for firmer ophthalmic and oculoplastic suturing where larger needles and tougher tissue planes are involved. The straight profile and integrated lock secure the needle through repeated passes. An 18mm mid‑screw to tip dimension keeps the working end forward of the handle for clear microscope visualization across the 146mm shaft.
The Castroviejo needle holder in straight geometry and heavy 12mm serrated jaws delivers robust control for larger gauge sutures (5-0 through 6-0) during anterior segment reconstruction, graft fixation, or secondary cataract surgery. Serrated working edge prevents suture slippage under tension. Lock mechanism and 145mm length support sustained closure without drift or hand fatigue. Standard Castroviejo profile ensures reliability.
The Castroviejo needle holder combines 11mm smooth jaws with a flat serrated handle and lock mechanism for stable needle control during delicate micro-suturing. The 140mm overall length provides comfortable reach for two-handed anterior segment wound closure.
Castroviejo needle holders in the straight 9mm jaw pattern drive 10‑0 nylon for corneal wound closure and 8‑0 silk for muscle anchoring. The internal lock secures the needle between passes, and a round knurled handle preserves rotational orientation during knot tying across the 134mm length. Medium jaw length balances needle stability with passage through small ophthalmic incisions.
These curved Castroviejo needle holders carry tungsten carbide jaw inserts for durable grip on fine ophthalmic suture needles. The curved profile follows the natural arc of needle passage through corneal and scleral tissue, and the integrated lock holds the needle between passes. At 140mm with a serrated handle, the instrument balances reach with microsurgical control.
This Castroviejo needle holder features tungsten carbide jaws for superior edge retention during extended micro-suturing procedures. The delicate 1mm serrated construction with straight shaft and lock provides stable three-point grip on fine ophthalmic needles through repeat use.
This straight Castroviejo needle holder in tungsten carbide provides ultraprecision control for delicate ophthalmic suturing tasks. The 11mm smooth jaw and delicate shaft geometry optimize handling of fine sutures in posterior capsular, corneal, and scleral closure. Tungsten carbide resists wear and maintains edge sharpness across many cases, supporting lasting precision and durability.
Tungsten‑carbide jaw inserts give this Castroviejo needle holder a hard, wear‑resistant grip on ophthalmic suture needles across many cases. The 9mm straight jaws and locking mechanism support a steady hold during needle repositioning, and the serrated flat handle delivers tactile rolling control. A 150mm overall length offers extended reach for oculoplastic and adnexal work.
This Castroviejo needle holder features tungsten carbide jaws in 9mm medium size, advancing durability and edge retention in microsurgical suture work. Tungsten carbide smoothness combined with 16mm mid-screw-to-tip working length supports precise needle control during fine phaco wounds and anterior chamber closure. Straight geometry and 145mm overall length provide standard Castroviejo performance with enhanced tool longevity.
This Castroviejo needle holder features a tungsten carbide jaw construction built for reliable durability across repeat ophthalmic microsurgical cases. The straight geometry and locking mechanism provide secure needle purchase during fine corneal and anterior segment suturing. At 140mm overall length, it enables precise fingertip control for capsulorhexis closure and IOL fixation work.
The Castroviejo needle holder is a hallmark instrument for ophthalmic microsurgery, offering curved geometry and medium jaw width for precision needle control during corneal, scleral, and IOL fixation work. The locking mechanism maintains needle security throughout tissue passage, while the round titanium handle supports extended procedure control.
The Castroviejo titanium needle holder combines lightweight, corrosion‑resistant titanium construction with a gently curved shaft and medium 11mm locking jaws for secure needle control during IOL fixation and anterior segment closure. The round grooved handle and 137mm overall length support extended surgical control with reduced hand fatigue. Locking mechanism enables single‑handed knot tying during wound closure.