Your cart is empty!
Sized at 3.5mm (9/64") with fully threaded double trocar points, this Steinmann pin sits between the 3.2mm and 4mm fully‑threaded gauges, suited to intermediate‑heavy skeletal traction requiring axial pull‑out resistance.
Features & Benefits
Built at 4.5mm (0.177") with fully threaded double trocar points, this Steinmann pin carries the heaviest fully‑threaded gauge in the standard range, sized for the largest skeletal traction setups requiring maximum pull‑out resistance.
Built at 4mm (5/32") with fully threaded double trocar points, this Steinmann pin pairs heavy shaft stiffness with full thread length for major skeletal traction requiring maximum pull‑out resistance against axial load.
The Stellbrink synovectomy rongeur features a heavily curved profile with a 2 × 5mm jaw that navigates around the joint capsule margin and infrapatellar fat pad during inflammatory tissue removal from the knee and shoulder. The pronounced curve orients the bite perpendicular to synovial surfaces, allowing surgeons to remove redundant membrane without damaging articular cartilage. At 171mm overall, the compact profile suits both open and minimally invasive approaches.
This perforated sterilization tray enables rapid steam and air penetration during autoclave sterilization cycles, reducing process time while maintaining secure containment of small instruments. The 11.8 × 5.8 × 1 inch perforated steel design accommodates microinstrument sets and promotes even heat distribution.
These straight Stevens scissors deliver blunt-tipped safety for fine anterior segment dissection. The narrow straight blades offer controlled linear cutting with excellent visibility, particularly suited to conjunctival and episcleral work. The ring handle and 108mm length support precise movements during delicate ophthalmic procedures.
Stevens super-cut scissors deliver enhanced cutting efficiency for fine ophthalmic tenotomy and anterior segment dissection. The curved blade geometry improves visibility and cutting control along tissue contours, while the super-cut edge maintains sharpness through many surgical cases. Ring handle and 125mm length support precise microsurgical control.
Stevens tenotomy scissors with curved blades and blunt tips are engineered for controlled dissection along curved muscle and tissue planes. The standard curve enhances visibility and cutting efficiency during tendon work and strabismus repair. Twelve-millimeter blades provide adequate width for stable cutting while preserving tactile feedback.
The Stevens tenotomy scissors combine curved geometry with blunt tips and a ring handle for safe dissection of conjunctiva and Tenon's capsule during strabismus surgery. The 30mm mid-screw-to-tip measurement optimizes leverage and cutting control, while the two-tone finish enhances visibility against tissue background.
These straight Stevens tenotomy scissors feature 12mm blunt blades for safe dissection of extraocular muscle and conjunctival tissue during strabismus and pterygium procedures. The blunt‑tip geometry prevents inadvertent scleral penetration, while the straight blade profile supports precise linear cutting along muscle fibers and tissue planes. A 106mm length maintains control in anterior orbital dissection.
Curved with blunt tips and Super Cut edges, these Stevens tenotomy scissors deliver crisp dissection through tenon's capsule and conjunctiva while the blunt tip protects underlying sclera. The ribbon‑style black ring handles reduce reflection under microscope illumination and keep weight low through extended use.
The Stevenson lacrimal sac retractor is an adjustable instrument with solid blades and serrated grip edges along the bottom blade surface. This design provides secure lacrimal sac retraction during dacryocystorhinostomy and canalicular procedures while preventing unwanted tissue slip. Stainless steel construction ensures reliable reprocessing across multiple lacrimal cases.
Stewart crypt hooks in long style extend reach into deeper hemorrhoidal anatomy during proctologic procedures. The extended hook facilitates crypt identification in higher anal canal locations. Long profile supports identification of proximal internal hemorrhoids.
Stewart crypt hooks in short style with 216mm straight shaft are designed for anal crypt identification and eversion during hemorrhoid banding and fistula procedures. The short hook profile provides subtle but reliable tissue engagement. Straight geometry supports anoscopic visualization during crypt manipulation.
The Stille dressing forceps at 114mm represents a minimal‑length option for confined operating spaces or delicate procedures where reach is less critical than precision control. The straight profile and compact geometry make it ideal for hand‑operated dressing work in restricted intraoperative positions. Stainless steel ensures durability across repeated sterilization.
The Stille dressing forceps at 152mm carry the broad serrated jaw pattern of the Stille family for sturdy manipulation of dressings, gauze, and soft tissue in general surgical and ward settings. The moderate length suits a wide range of routine handling tasks.
The Stille‑type chisel carries a straight 2mm cutting head on a 203mm body, sized for fine cortical work in hand, foot, and craniofacial procedures. The narrow head places clean planar cuts under mallet impact, and the long body keeps the surgeon's grip well clear of the impact zone.
Curved Stille gouge (10mm blade) sculpts bone along articular surfaces and complex periosteal contours in confined orthopaedic spaces. The gentle curve accommodates anatomic variation and joint capsule proximity during delicate work. Eight-inch (203mm) length enables control near sensitive structures. Stainless‑steel resists corrosion.
This Stille curved gouge with a 12mm width supports moderate-volume bone contouring in fields with challenging approach angles. The curved shaft improves operative access and reduces repetitive strain, while the cutting profile delivers smooth, controlled osseous removal. A 203mm overall length provides effective reach.
A Stille curved gouge with a 15mm width is engineered for larger-scale bone contouring in angled or restricted operative fields. The curved shaft geometry improves visualization and ergonomic control, while the broad blade profile supports sustained mallet impact. The 203mm overall length accommodates varied reconstructive approaches.
This Stille curved gouge with a 20mm width supports major bone contouring in deep or angled surgical fields. The curved shaft angle enhances reach beneath overhanging structures and reduces operator strain during prolonged use. The broad cutting profile tolerates forceful mallet application while maintaining clean osseous separation.
This Stille curved gouge with a 6mm width is designed for delicate bone sculpting in confined or angulated fields. The curved shaft angle improves visualization and reduces hand strain compared to straight instruments, while the 6mm cutting edge supports precision work in sensitive areas.
A Stille curved gouge with an 8mm width enables controlled bone removal in angled or restricted surgical spaces. The curved shaft geometry improves ergonomic access beneath overhanging structures, while the cutting profile maintains smooth osseous separation. The 203mm overall length accommodates varied anatomical approaches.
A Stille straight gouge featuring a 10mm width enables controlled bone removal along curves and depressions without sudden fracture. The curved blade profile disperses mallet force smoothly, reducing shock loading. The 203mm shaft supports both direct and angled operative approaches.
This Stille straight gouge with a 12mm width is built for moderate-volume bone sculpting in fields requiring curved, flowing removal patterns. The curved cutting profile maintains even contact across the bone surface, reducing stress points and supporting clean separation. A 203mm overall length accommodates varied surgical approaches.
Fourteen-millimetre straight Stille gouge addresses moderate-width bone cuts in controlled orthopaedic exposures where linear geometry guides osteotomy paths and cortical trimming. The straight blade prevents curved deflection during advancement. Eight-inch length enables balanced reach and cutting control throughout the work. Stainless‑steel sustains durability.
A Stille straight gouge with a 15mm width supports progressive bone sculpting in larger reconstructive fields. The curved blade geometry follows natural osseous contours, reducing sudden load spikes that could cause fracture or trauma. The 203mm length provides effective reach across varied surgical depths.
Eighteen-millimetre straight Stille gouge handles broader linear bone cuts in larger exposures requiring aggressive cortical sculpting and periosteal removal. The straight profile maintains cut direction throughout advancement without edge deflection. Eight-inch (203mm) length provides stable reach in extended fields. Stainless‑steel composition ensures lasting performance.
This Stille straight gouge with a 20mm width is engineered for major bone contouring during extensive reconstruction procedures. The broad curved profile maintains even striking contact and supports sustained mallet impact without edge damage. A 203mm overall length accommodates both superficial and deep osseous work.
Wide-head straight Stille gouge (22mm) removes substantial bone across major exposures where linear cortical cuts improve surgical approach and visualization. The straight blade prevents curve-induced wandering during heavy work. Eight-inch length supports intraoperative stability in extended anatomic fields. Stainless‑steel sustains multi-case demands.