Your cart is empty!
The Wertheim forceps curve is engineered for gynecologic dilation and cervical grasping during hysterectomy and cervical procedures. Its 1 × 2 tooth pattern provides secure purchase on firm cervical tissue without crushing, while the curved shaft aligns naturally to the cervical canal axis. At 220mm, the instrument reaches uterine attachments while maintaining surgeon control.
Features & Benefits
These Westcott conjunctival scissors are optimized for controlled separation and trimming of conjunctival flaps during pterygium, glaucoma filtration, and ocular surface reconstruction. The gentle 10mm blunt blades prevent inadvertent scleral perforation, while the broad serrated wide handle maximizes grip stability during extended conjunctival work. Polished 135mm overall length supports precise hand positioning.
These rounded Westcott tenotomy scissors are engineered for safe episcleral and conjunctival surgery. The rightward curve and 20mm blade length allow gentle dissection along episcleral planes while the blunt tips minimize trauma to underlying sclera. A serrated grip handle and polished finish support confident control during extraocular muscle and pterygium procedures.
The Westcott stitch scissors provide sharp, pointed blades for suture removal and fine stitch cutting during anterior segment revision. The serrated flat handle ensures secure grip without rolling, while the polished finish enhances visibility. The 108mm straight geometry supports precise positioning during delicate suture work.
This stitch scissors is engineered for controlled suture removal and adjustment in corneal and conjunctival wounds. The sharp straight blades and 20mm tip length allow precise access to sutures near the limbus and episclera. Serrated grip handle provides reliable finger control during delicate postoperative management.
The Westcott utility scissors combine a subtle 7‑degree curve with blunt tips to support controlled cutting in varied ophthalmic tissues�from conjunctiva to lacrimal system work. The broad serrated grip handle enhances control during extended procedures, while the 25mm working length (from mid‑screw to tip) provides excellent visualization of the operative field. Extended overall length of 131mm improves ergonomic reach.
The Wheeler cyclodialysis spatula is double-ended with 1.75 × 30mm sterling silver blades, designed for precise separation of the ciliary body tissue from the scleral wall during glaucoma procedures including cyclodialysis and angle-recession repair. The polished finish and serrated flat handle provide excellent control during this delicate dissection. At 139mm, this instrument supports access to the ciliary body face while maintaining visibility and tactile precision.
These white nylon replacement heads are configured for the Mead mallet series, offering 23mm diameter soft‑strike surface for surgeon-controlled force delivery during fine osteotomy work near articular cartilage. Sold as a set of two, they provide inventory flexibility across cases and extend the functional life of reusable mallet handles. Nylon composition preserves bone architecture when striking delicate landmark areas.
The White tonsil forceps combine a curved shaft with 6mm jaws, designed to seize and mobilize the palatine tonsil during tonsillectomy while distributing grip pressure across the tonsillar surface. The curved geometry allows access to the lateral oropharynx while keeping the hand outside the oral field. The 184mm length supports control during blunt dissection.
The Wiener antrum rasp (large, 5mm diameter) removes bone and debris from the maxillary antrum and sinus cavity walls. Its 5mm working surface provides efficient bone removal in larger sinus spaces. Stainless steel composition withstands the abrasive demands of antral bone work.
The Wiener antrum rasp (large, trocar tip, 5mm diameter, coarse shaft, 190mm overall) combines bone removal with a sharp trocar point for initial ostium penetration in FESS. Its coarse shaft texture enhances grip, while the 5mm rasp surface removes antral walls efficiently. Stainless steel durability supports sinus procedures.
Wiet otologic picks deliver controlled stapes footplate manipulation and ossicular chain palpation during mastoidectomy and ossiculoplasty procedures. The 1mm tapered tip enables fine ossicular isolation and bone work in confined middle-ear anatomy. The 45-degree angled geometry optimizes approach angle to ossicular structures while minimizing microscopic obstruction.
The 24‑gauge Wiet suction tube delivers the finest standard otologic suction lumen in the Wiet family, sized for delicate microsurgical and otologic work where minimal flow is wanted. The fine gauge preserves the working face under the operative microscope.
Angled to the left with a 2.5mm‑wide J profile, the Wilbrandt‑Binkhorst irrigating cannula delivers controlled fluid into the anterior chamber for capsule maintenance and cortical cleanup. The 23ga shaft carries an open end at 14mm from bend to tip, and the 18mm working length matches a small‑incision approach.
The Wilbrandt-Binkhorst angled irrigating cannula extends versatility with its 14mm bend-to-tip measurement and J-shaped 2.5mm tip geometry. The angled 23ga shaft improves access to chamber peripheries and posterior capsule surfaces during cortical cleanup and capsule polishing. The 18mm working length and open end enable high-flow irrigation without pressure limitation.
The Wilbrandt-Binkhorst irrigating cannula is designed for controlled anterior chamber irrigation with a J-shaped 2.5mm wide tip and open end for free fluid flow. Its 23ga straight shaft maintains direct approach geometry during all phases of phacoemulsification, while the 18mm working length supports consistent positioning and reliable suction-irrigation coordination.
The delicate Wilde ear‑nasal dressing forceps carry an angled shaft with 2 × 14mm straight serrated jaws, sized for packing removal and dressing manipulation in the ear and nose. The angled shaft preserves visualization, and the 121mm length suits in‑office and intraoperative work.
The Wilde intervertebral disc rongeur features a straight 3mm fenestrated jaw design optimized for removing nucleus pulposus and annular fragments during spinal decompression. The fenestrated blade resists clogging while providing precise bone and soft tissue engagement. Working length of 140mm supports deep lumbar and cervical access.
Built for adult anterior segment cases, the Williams eye speculum carries 14mm blades on a spring‑controlled mechanism that locks at the desired spread up to 52mm. The dull finish reduces microscope glare across the lid surface, while the 86mm overall length keeps the frame compact against the brow. Spring control gives steady retraction without ratchet steps.
The Williams small speculum combines open-wire blade construction with a gentle upward curve, minimizing bulk while maintaining secure eyelid separation. Its 12mm blade length and 30mm spread suit smaller eyes and anterior chamber procedures where field clarity is paramount. The curved geometry conforms to lid anatomy, reducing margin trauma during moderate cases.
Williger large mallet features hour‑glass‑shaped stainless steel head and provides sustained striking force for cortical bone reduction and major fracture procedures. The 29.9mm head diameter and 13.2oz weight deliver higher‑momentum impact, while round handle secures grip. Its 242mm length enables stable controlled striking.
Williger medium mallet with hour‑glass‑shaped stainless steel head balances weight and control for bone striking in general and fine orthopaedic work. The 27.9mm head diameter and 11.2oz weight suit prolonged surgical procedures, while round handle enables secure handheld control. Its 242mm length provides stable striking position.
The Wills Hospital utility forceps features straight shafts with a 13mm crisscross serrated platform and wide serrated handle, providing secure grip for general lid and anterior segment tissue manipulation. The cross-serrated platform prevents tissue slippage during grasping, supporting reliable tissue handling in various ophthalmic applications. This 111mm instrument offers balanced reach and control.
These wire cutter spare parts represent replacement components for routine maintenance of wire‑cutting instruments used in orthodontic and skeletal fixation procedures. The 230mm specification indicates compatibility with standard‑length wire cutters. Stainless steel components ensure corrosion resistance and durability across repeated sterilization cycles.
This tungsten carbide wire cutter with end‑cutting action removes orthopedic fixation wires from bone, plates, and screws with superior hardness and edge retention. Maximum capacity 0.62 inches (1.6mm) handles standard orthopedic implant wires. Tungsten carbide construction ensures durable performance and cutting efficiency across repeated surgical use.
This tungsten carbide wire cutter is optimized for precise sectioning of orthopedic fixation wires and appliances during removal procedures. The double-action mechanism and front-cutting geometry deliver controlled bite closure on wires up to 2.4mm diameter, and the straight profile provides direct line of sight for exact cutting positioning. Tungsten carbide maintains its edge through repeated cuts and thorough sterilization.
The wire extraction pliers, featuring tungsten carbide double-action jaws and serrated grip surfaces, provides superior holding power for orthodontic and fixation wire removal in orthopedic procedures. Double-action leverage multiplies mechanical advantage, reducing hand force required for stubborn wire extraction. Serrated 2mm jaws prevent slippage during controlled wire withdrawal.
Wire extraction pliers with tungsten carbide double-action jaws and 6mm serrated edge geometry deliver superior grip force and durability for removing fixed orthodontic wires and rigid fixation hardware from periosteum and cortical surfaces. The 178mm length and carbide jaw construction maintain cutting edge across multiple extraction cases without slipping or galling.
These narrow‑nose wire‑pulling pliers feature tapered serrated jaws that converge to 3.5mm, providing precise grip on orthodontic wires during reduction and manipulation. The tapered jaw geometry distributes compressive force across the intramedullary wire without crushing periosteal attachments. Extended 191mm length allows access to posterior segments during ligature placement.
Heavy‑duty tungsten carbide construction makes this wire twisting forceps ideal for grasping and rotating fixation wire during orthopedic and spinal procedures. The carbide jaw surfaces resist dulling when manipulating high‑carbon steel or stainless steel wires. The 152mm length supports two‑handed control in open and minimally invasive approaches.