Your cart is empty!
These straight Heymann nasal scissors are designed for controlled mucosal and soft tissue dissection in nasal and septorhinoplasty procedures. The 197mm length provides excellent reach into the nasal cavity while maintaining fine blade control. Ring handles and stainless steel construction support reliable performance across extended rhinologic cases.
Features & Benefits
Hi-Level bandage scissors combine angled shanks with a serrated upper blade and small probed tip, enabling clean dressing removal without patient trauma. The serrated upper blade anchors the dressing while the probed tip slides smoothly beneath adhesive layers. At 146mm with a two-tone finish, they are compact yet visible in the dressing cart.
The Hibbs bone curette with large cup geometry is designed for aggressive periosteal elevation and curetting of bone surfaces during orthopaedic exposures. The straight configuration and 203mm length support stable positioning during fascial and periosteal work, while stainless steel construction provides reliable performance across routine sterilization and repeat clinical use.
The medium‑cup Hibbs bone curette with straight profile delivers controlled removal of fibrocartilage, callus, and trabecular bone from fracture sites and joint surfaces in open and arthroscopic procedures. The cup geometry concentrates force on a small surface area, allowing precise debris clearance from the periosteum and endosteal surfaces without excessive stripping. Stainless steel blade resists dulling from repeated contact with cortical bone.
The Hibbs bone curette features a small cup geometry for precise debridement of bone surfaces during joint arthroscopy and open procedures. Its straight design and 203mm length provide excellent control and reach into articular compartments. Stainless steel provides reliable surface finish for repeatable cleaning without tissue drag.
The 25mm curved Hibbs chisel accommodates the largest posterolateral fusion sites and multilevel decortication procedures. Its broad curved blade removes cortical bone and decorticated periosteum across wide lateral and facet regions, while the hexagonal handle sustains controlled striking throughout extended procedures.
The 38mm curved Hibbs chisel addresses the broadest multilevel posterolateral fusion sites, removing cortical bone and decorticated periosteum across expansive lateral vertebral and facet regions. The gentle curve conforms to spinal anatomy throughout sustained striking, while the hexagonal handle absorbs repetitive impact without slippage.
The 32mm curved Hibbs chisel provides maximum working width for large-scale multilevel posterolateral decortication. Its broad gentle curve accommodates extensive lateral vertebral body and facet surfaces, while the hexagonal handle maintains stable grip during forceful striking across multiple spinal levels.
The 28mm curved Hibbs chisel enables broad decortication across expansive multilevel posterolateral fusion beds. The gentle curve follows vertebral body and facet anatomy while delivering maximum working surface per strike, and the hexagonal handle ensures stable control through sustained mallet impact.
This curved 13mm Hibbs chisel enables approach to paraspinal soft‑tissue planes and lateral vertebral body regions during posterolateral fusion procedures. The gentle curve conforms to laminar and facet joint anatomy, reducing the need for hand repositioning during prolonged mallet work. Hexagonal handle sustains control through multiple striking cycles along the vertebral body margin.
The curved Hibbs chisel, 6mm blade with hexagonal handle and 240mm length, facilitates controlled angled bone cuts in vertebral body and spinal segment work where curved approach improves geometric accuracy. Hexagonal handle provides rotational stability during curved mallet strikes. Curved geometry enables precise angled cuts without repositioning.
The curved 19mm Hibbs chisel extends working width for large‑scale posterolateral and facet‑based fusion site preparation. The gentle curve accommodates lateral vertebral body approaches and facet joint surfaces, while maintaining ergonomic control through the hexagonal handle. 240mm length sustains reliable access across multiple segmental levels.
The curved Hibbs chisel with 10mm blade improves approach geometry for facet joint and lateral laminar regions where perpendicular straight‑blade access is limited. The gentle curve aligns the blade to follow vertebral body contours and facet surfaces, while the hexagonal handle ensures stable grip during confined‑space mallet striking. 240mm length reaches deeper spinal segments.
The 16mm curved Hibbs chisel provides expanded working surface for lateral and posterolateral decortication at the vertebral body and transverse process junction. Its gentle curve follows periosteal surfaces and bone contours without requiring repeated reorientation. 240mm length and hexagonal handle enable sustained mallet striking control in confined spinal spaces.
The 22mm curved Hibbs chisel delivers broad working surface for extensive posterolateral and multilevel fusion-site preparation where spinal anatomy demands curved-blade approach geometry. The gentle curve aligns with vertebral body and facet contours, while the hexagonal handle maintains control during sustained striking at multiple levels.
The 25mm Hibbs straight chisel removes cortical bone across expansive vertebral bodies in large‑scale anterior fusion constructs. The wide flat blade efficiently decortcates the periosteal surface and vertebral endplate, while the hexagonal handle absorbs mallet impact without fatiguing the surgeon's hand. 240mm length spans both cervical and lumbar exposures.
The 38mm Hibbs straight chisel addresses the largest vertebral bodies and multilevel fusion sites, removing cortical bone across the broadest surgical fields. Its flat blade delivers consistent decortication from endplate to periosteal margin, while the hexagonal handle absorbs repetitive mallet impact. 240mm length maintains stable reach across extensive anterior and posterior exposures.
The 32mm Hibbs straight chisel delivers the broadest working surface for large‑scale multilevel vertebral decortication across anterior fusion fields. The flat blade removes cortical bone uniformly across the entire vertebral endplate and surrounding periosteum, while the hexagonal handle maintains stable control during forceful mallet striking. 240mm length enables reliable access to lower thoracic and lumbar regions.
The 28mm Hibbs straight chisel provides maximum working width for multilevel vertebral body decortication in extensive anterior fusion procedures. Its flat blade removes cortical shell and decorticated bone across the full periosteal surface with controlled mallet strikes, while the hexagonal handle sustains grip during sustained work. 240mm length reaches deep spinal segments.
This 13mm Hibbs straight chisel expands working surface for anterior vertebral body and intersomatic fusion site preparation. The flat blade removes cortical shell and decorticated bone with controlled mallet strikes, while the hexagonal handle absorbs repetitive impact and prevents hand fatigue. Extended length of 240mm enables reliable access throughout anterior column exposures.
The Hibbs chisel, straight with a 6mm blade, hexagonal handle, and 240mm length, provides controlled bone cutting and vertebral body preparation during spinal fusion and reconstruction. Hexagonal grip improves rotational control and reduces hand rotation fatigue during mallet-assisted bone work. Extended length facilitates access to deep vertebral segments.
The 19mm Hibbs straight chisel extends working surface for large‑scale vertebral body decortication in expansive anterior cervical and thoracic fusion sites. The flat blade removes cortical shell and decorticated bone uniformly across the periosteal surface, while the hexagonal handle ensures stable control during high‑force mallet striking. 240mm length maintains ergonomic reach.
The Hibbs straight chisel delivers a 10mm‑wide flat blade optimized for vertebral body decortication during fusion bed preparation. The hexagonal handle enables secure palm grip with distributed impact absorption during mallet-driven bone removal, while the 240mm length reaches deep lumbar and thoracic regions. Stainless‑steel construction resists corrosion through repeated sterilization cycles.
The 16mm Hibbs straight chisel accommodates wide intervertebral spaces and broad fusion surface areas in multilevel anterior and posterior constructs. Its flat blade delivers consistent decortication across the vertebral endplate and periosteal surfaces, while the 240mm length and hexagonal handle sustain controlled mallet striking across multiple segmental levels.
The 22mm Hibbs straight chisel delivers maximum surface coverage for anterior and posterior fusion site decortication in extensive spinal procedures. Its wide flat blade removes cortical bone across the entire vertebral body surface and surrounding periosteal regions, while the hexagonal handle maintains ergonomic control during sustained mallet impact. 240mm length provides stable positioning in deeper spinal levels.
This Hibbs gouge delivers straight geometry at 10mm width with hexagonal handle for precise cancellous bone removal in spinal and orthopedic procedures. The flat curved blade scoops bone while preserving the cortical shell and protecting underlying structures like the dura and ligament attachments within the spinal canal. The 240mm shaft supports controlled two‑hand technique.
At 16mm width with standard curve and hexagonal handle, this curved Hibbs gouge delivers atraumatic cancellous bone removal in mid‑scale spinal procedures. The arched blade eases dissection around the vertebral body perimeter and intramedullary canal, protecting periosteum and posterior ligament structures. The 240mm shaft sustains controlled two‑hand scooping.
At 16mm width with straight geometry and hexagonal handle, this Hibbs gouge efficiently removes cancellous bone while preserving the cortical surface in orthopedic exposures. The curved blade contours away from the intramedullary canal and posterior ligament complex, reducing the risk of inadvertent perforation. The 240mm length provides stable two‑hand control.
This curved Hibbs gouge at 19mm width with standard curve and hexagonal handle provides reliable bone scooping in mid‑scale orthopedic exposures. The arched blade contours around the vertebral body and facet structures, minimizing overcut risk toward the spinal canal and joint capsule. The 240mm length ensures stable two‑hand control.
This Hibbs gouge presents 19mm straight profile with hexagonal handle for efficient cancellous bone scooping in mid‑scale spinal work. The curved blade design prevents cortical break‑through and protects the underlying dura and ligament attachments during periosteal and intramedullary dissection. The 240mm shaft delivers excellent control.