Your cart is empty!
Select a category below to browse instruments
Categories
Browse Instruments
The Cobb spinal elevator features a sharp 19mm round blade for controlled elevation and dissection of the periosteum from vertebral laminae and transverse processes. The hexagonal knurled handle provides secure grip during subtle leverage motions, while the 241mm length reaches deep lumbar and lower thoracic regions. Sharp working edge enables precise separation at the bone‑tissue interface.
Features & Benefits
This Cobb spinal elevator combines a sharp 25mm round blade with a hexagonal handle, engineered for controlled vertebral body and endplate elevation during spinal decompression and fusion work. At 241mm, the overall length provides ample surgical reach into deep spinal exposures.
The Cobb spinal elevator, 25mm wide and 280mm long, is engineered for controlled subperiosteal dissection and elevation of bone from the vertebral body and lamina during spinal procedures. Its sharp working edge penetrates the periosteal interface cleanly, facilitating the separation of soft tissue from bony surfaces without stripping. The straight geometry and extended length enable access to deep spinal exposures with minimal lateral tissue trauma.
The Cobb spinal elevator in 32mm width extends instrumentation for broader subperiosteal exposure along posterior spinal elements. Its sharp edge and 280mm shaft support controlled elevation over multiple vertebral segments during fusion and decompression cases. Stainless steel construction ensures lasting durability across high-volume sterilization protocols.
This Cobb spinal elevator features a sharp, 13mm-wide blade for controlled subperiosteal dissection along the vertebral column. The straight geometry and 280mm length provide stable depth access during spine fusion and decompression procedures. Stainless steel construction withstands repeated sterilization cycles and delivers predictable, sharp lift at the bone-periosteum interface.
The Cobb spinal elevator, 19mm with sharp blade, provides controlled periosteal and soft tissue elevation during vertebral decompression and spinal fusion preparation. Extended 280mm length improves reach to deep structures and preserves bone margin integrity. Stainless steel delivers reliable performance and edge retention across repeated surgical cases.
The Cobb spinal elevator delivers a sharp 10mm blade in straight geometry for precise bone edge elevation during vertebral body and laminar dissection. The sharp working edge cleanly separates periosteum and ligament from bone, and the 280mm extended length provides excellent reach into the surgical field while the handles remain accessible from proximal positions. Designed for reliable repeated sterilization.
This Cobb spinal gouge features a full curved blade measuring 7mm wide, with a round knurled handle for controlled leverage during vertebral body and intervertebral space sculpting. At 280mm, the overall length provides adequate reach into deep spinal exposures during discectomy and fusion preparation.
The Cobb spinal gouge with gentle curve offers improved approach geometry for accessing parasagittal and lateral laminar surfaces during decompression. The 7mm‑wide blade curves smoothly, allowing surgeons to follow bone contours around the vertebral body and foramen without shifting hand position. Knurled handle ensures controlled striking force during facet joint work.
The Cobb reverse‑curved gouge is optimized for posterolateral vertebral body work where approach geometry demands upward and outward blade direction. The reverse curve and 7mm blade enable controlled bone removal from beneath the facet joint capsule and around the intramedullary canal. Round knurled handle maintains grip security during confined‑space dissection.
The Cobb spinal gouge in its straight configuration delivers a 7mm‑wide flat blade for controlled decortication along the vertebral lamina and spinous processes. The round knurled handle provides secure grip during mallet‑driven bone removal, while the 280mm length enables access to deeper vertebral bodies. Stainless‑steel construction maintains edge geometry across multiple sterilization cycles.
The Cobb‑Bruns straight curette is engineered for precise bone surface preparation during spinal and orthopedic procedures. Size 1 tip geometry allows controlled removal of bone debris and cartilaginous fragments from subchondral surfaces and vertebral endplates. Stainless‑steel construction supports reliable performance across repeated sterilization and clinical use.
This Cobb‑Bruns curette, Size 2, features a straight 280mm shaft designed for controlled debridement of bone surfaces and removal of soft tissue from periosteal surfaces during orthopedic exposure. The compact Size 2 blade width provides fine precision in confined surgical fields. Stainless steel construction ensures reliable performance across repeat use.
The Cobb‑Bruns Size 3 curette provides increased blade surface area for efficient periosteal stripping during orthopedic dissection. Its straight 280mm design delivers reliable engagement with bone and periosteum in moderate-depth exposures. Stainless steel edges remain sharp and burr-free across many cycles.
Size 4 blade of the Cobb‑Bruns curette line suits wider bone surface debridement in open orthopedic approaches. The straight 280mm shaft maintains consistent geometry for reliable periosteal separation and bone edge smoothing. Robust stainless steel construction supports high-demand surgical use.
The Cobb‑Bruns Size 6 curette offers maximum blade width within the curette line for expedited removal of soft tissue and bone cortex during wide orthopedic exposures. Its straight 280mm shaft and robust profile support forceful scraping of vertebral endplates and broad bone surfaces. Stainless steel edge reliability is built for high-volume use.
The Collin lead-filled mallet exploits weight distribution and density to deliver consistent percussive force during vertebral body and intervertebral disc manipulation. Its blank-shaped head measures 29.8mm across and weighs 7.1oz, providing substantial but controllable striking energy. Stainless steel construction supports reliable reprocessing.
The Collin‑Lucae (Peck) lead‑filled mallet at 7.6 ounces with a 29.6mm head delivers controlled strikes on osteotomes and chisels with the lead‑filled head dampening recoil. The 197mm body keeps the surgeon's grip clear of the impact zone during sustained orthopedic and ENT work.
The combination flat-nose plier/cutter, featuring a 3.5mm tapered tip and 17-gauge cutting capacity, delivers dual functionality for wire bending and cutting in orthodontic and fixation hardware work. Tapered nose geometry enables precise gripping and positioning of small wires and pins. Integrated cutting edge handles wire and thin plate sections up to 1.5mm.
This combination mallet integrates one replaceable nylon cap and one solid stainless‑steel side on a cylindrical 32mm head, enabling dual‑mode striking within a single instrument. The 200mm length and 12.7oz weight support flexible force application during diverse reduction and osteotomy procedures.
This combination mallet features a replaceable nylon cap paired with a solid stainless steel striking face, providing dual-impact profiles for orthopaedic work. The 25mm cylindrical head delivers controlled force delivery to bone, periosteum, and implant positioning during surgical procedures. Round handle geometry and 195mm length support stable, repetitive striking without operator fatigue.
Combination mallet #5 medium size features replaceable nylon cap and solid stainless steel side for versatile bone striking. The round knurled handle, 25mm head diameter, and 12.8oz weight suit controlled arthroscopic and percutaneous procedures. Its 185mm length provides stable handheld control.
Combination mallet #6 medium with cylinder‑shaped head features replaceable nylon cap and solid stainless steel side for flexible impact work. The round handle, 25.1mm head diameter, and 8.1oz weight suit fine‑precision arthroscopic procedures. Its 187mm length enables stable controlled striking.
This combination mallet with dual striking surfaces�replaceable nylon cap and solid stainless steel�adapts to varied bone hardness and instrument requirements. The 22mm cylinder head distributes impact force, while the hollow handle reduces overall weight for extended use. The interchangeable cap allows field adjustment from soft‑tissue to cortical applications.
This combination mallet pairs an 8-ounce stainless‑steel head with a nylon cap and aluminum handle for controlled bone-work impact. The 25mm head diameter distributes striking force across periosteal surfaces without creating stress concentrations. At 7.5 inches (191mm), it provides compact reach in confined surgical fields while maintaining adequate mass for reliable osteotomy delivery.
Combination mallet extra‑large with replaceable nylon cap and solid stainless steel side delivers flexible striking for bone and cartilage procedures. The 38mm head diameter and 12.7oz weight suit intermediate‑force bone work, while replaceable nylon extends instrument life. Round handle enables secure grip during prolonged procedures.
This large angled cone ring curette angled at 35 degrees with an 8mm diameter ring provides improved approach geometry to vertebral bodies, endplates, and facet joint surfaces. The 229mm shaft and knurled aluminum handle support controlled curettage in deep spinal exposures.
This large cone ring curette features an 8mm diameter round ring on a 229mm shaft with aluminum knurled handle, designed for controlled subperiosteal and cancellous bone curettage. The ring geometry allows capture of bone debris while providing directional control during bone bed preparation.
The cone ring curette medium size 2 features a 6mm diameter round ring with straight geometry and aluminum round knurled handle for ergonomic bone and debris removal. The ring pattern allows internal surface curettage and external contour work on articular cartilage and cancellous bone in confined joint spaces. Stainless steel ring construction resists wear across multiple cases.
The small angled cone ring curette at 35 degrees with a 3mm ring diameter brings fine-control bone curettage to deep spinal recesses and confined joint work. At 229mm length with knurled aluminum handle, it supports precision work in laterally recessed anatomical spaces.
Our sales specialists are available Monday through Friday, 9am to 5pm EST.