Your cart is empty!
Sized at 12 French, this Frazier suction tube provides high‑capacity evacuation through deep operative corridors where smaller bores would clog. The 30‑degree angle reaches behind overhanging structures, and the thumb‑plate cutoff hole gives the surgeon real‑time control over suction strength. An included stylette clears the tip when debris accumulates.
Features & Benefits
The medium 9 French (3mm) Frazier suction tube angled 30 degrees with a stylette at 100mm working length delivers moderate flow during general surgical cases. The angled tip preserves visualization, and the thumb‑plate cutoff modulates flow at the surgeon's fingertip.
The large 10 French (3.33mm) Frazier suction tube angles 30 degrees with a stylette at 100mm working length, sitting between the medium 9Fr and X‑large 11Fr formats. The angled tip preserves visualization, and the thumb‑plate cutoff modulates flow.
A 7 French (2.33mm) lumen makes this Frazier suction tube the next step up for moderate‑flow aspiration in sinus, otologic, and neurosurgical corridors. The 30 degrees angle keeps the handpiece below the line of sight, and the thumb‑plate cutoff hole lets the surgeon modulate suction without releasing the field. The included stylette clears clot or particulate from the bore, with a 100mm working length inside a 171mm overall length.
This Baron suction tube, 3Fr, features an angular design with a thumb plate cutoff bypass, a 90mm long working length, and a total length of 155mm to support controlled otologic suction.
The Baron 3 French suction tube angles the tip with a thumb‑plate cutoff bypass on a standard 75mm working length, sized for fine otologic and microsurgical fluid clearance. The thumb‑plate bypass supports continuous suction line connection with intermittent flow at the working face.
This Baron suction tube, 5Fr, incorporates an angular shaft with a thumb plate cutoff bypass, a 90mm long working length, and a total length of 155mm for increased suction capacity.
The Baron 5 French suction tube sits between the 3 French and 7 French variants for fine‑to‑moderate otologic and ENT flow. The angular shaft preserves visualization, and the thumb‑plate cutoff bypass supports continuous suction line connection.
This Baron suction tube, 7Fr, features an angular configuration with a thumb plate cutoff bypass, a 90mm long working length, and a 155mm overall length for robust otologic suction.
Stepping up to 7 French, this Baron suction tube delivers moderate flow for otologic and ENT work where the 3 French and 5 French variants are too fine. The thumb‑plate cutoff bypass supports continuous suction line connection with intermittent flow.
This 7Fr Baron suction tube delivers controlled fluid evacuation across ENT and general surgical fields where a slim straight cannula is preferred. The 94mm working length within an overall 146mm shaft balances reach with surgeon control at the field. Stainless‑steel construction holds up across repeat sterilization cycles in routine clinical use.
This Baron suction tube delivers controlled fluid and debris removal through an angled tip configuration optimized for general and specialty surgical fields. The 5Fr bore and 102mm working length balance suction capacity with tactile control, allowing surgeon-modulated aspiration without tissue trauma. Reinforced construction supports hundreds of reprocessing cycles without degradation.
Sized to 3 French, this Brackman suction tube is built for fine aspiration in otologic and microsurgical fields where lumen control matters more than volume. Stainless‑steel construction supports cleaning of the narrow bore between cases. The small caliber draws fluid without disturbing adjacent middle‑ear or microsurgical structures.
This Brackman suction tube, 7Fr, features offset suction tip holes, a thumb plate cutoff bypass, a 75mm working length, and a 114mm total length for controlled otologic suction.
This Ferguson‑Frazier suction tube angles the shaft 75 degrees with a 9 French (3mm) lumen on a 159mm body, sized for tight‑angle access in smaller surgical fields. The 100mm medium‑large working length suits ENT and head‑and‑neck cases where a sharper angle is wanted.
This Ferguson Frazier suction tube uses a 75‑degree angled shaft, an 8Fr 2.6mm lumen, a thumb cutoff plate, a 100mm working length, and a 159mm overall length for mid‑depth suction tasks.
The Ferguson‑Frazier suction tube features a 14Fr lumen with a finger‑thumb cutoff plate, enabling surgeon‑controlled suction modulation in surgical fields. The angled shaft improves approach geometry beneath overhanging structures. Its 150mm working length suits moderate‑depth aspirations.
Built at 7 French (2.3mm) on a 260mm body with 200mm working length, this extra‑small Ferguson‑Frazier suction tube delivers fine‑gauge clearance for deeper microsurgical and otologic fields. The finger‑thumb plate cutoff hole supports surgeon modulation.
The Ferguson‑Frazier suction tube at 203mm total length combines angled approach geometry with a 7Fr lumen for controlled evacuation in general surgical fields. The thumb plate cutoff hole provides surgeon‑controlled flow modulation during delicate aspiration near vital structures. The 150mm working length reaches moderately deep cavities.
This Ferguson‑Frazier variant steps up to an 8Fr lumen for increased aspiration capacity in moderately complex surgical fields. The angled shaft improves ergonomic approach beneath overhanging structures, while the thumb plate design grants real‑time suction modulation. At 150mm working length, it reaches into deeper abdominal and thoracic cavities.
The Ferguson‑Frazier angled suction tube carries a 9 French (3mm) lumen with a finger‑thumb plate cutoff hole, scaling up the suction reach to a 200mm medium working length for deeper surgical fields. The 260mm overall length keeps the hub well clear of the wound.
This Ferguson‑Frazier suction tube combines angled geometry with a 10Fr lumen and thumb plate cutoff hole, providing surgeon-modulated aspiration in moderate surgical fields. The 200mm working length and 260mm overall length balance reach with control, enabling deployment in deeper compartments. The angled design improves approach angles beneath overhangs.
This Ferguson‑Frazier suction tube features a 10Fr lumen with finger‑thumb bypass plate control for moderate‑to‑high volume evacuation in deeper surgical fields. The angled 203mm overall length with 150mm working length provides extended reach while maintaining maneuverability. The Frazier‑tip geometry supports atraumatic aspiration. Stainless‑steel construction supports routine reprocessing.
This extended Ferguson‑Frazier variant combines a 12Fr lumen with an XL 200mm working length, enabling deeper surgical site aspiration while maintaining precise surgeon control via the thumb cutoff. The 4mm tip and angled geometry optimize access in complex anatomical corridors.
This Ferguson‑Frazier suction tube combines the modified Ferguson thumb‑plate cutoff with a 6Fr Frazier‑tip lumen for controlled aspiration in confined surgical fields. The angled 260mm overall geometry with a 200mm working length enables access to deeper anatomical structures. The finger‑thumb bypass hole supports surgeon‑controlled suction modulation. Stainless‑steel construction ensures corrosion resistance.
This Ferguson Frazier suction tube features an angled design, an 8Fr 2.6mm lumen, a thumb cutoff plate, a 200mm working length, and a 260mm overall length for controlled deep‑field suction.
This Frazier aspirating cannula features a 10Fr bore angled 30 degrees from a straight shaft to access surgical fields from oblique approaches. At 318mm overall, the extended length supports deep aspiration in neurosurgical, otologic, and general thoracic procedures.
The Frazier aspirating cannula at 8 French angles 30 degrees on a 125mm body for fluid clearance during otologic and ENT work. The fixed angle directs the working tip into deeper anatomical pockets, and the moderate gauge balances flow capacity with fine‑field control.
This 10 French insulated Frazier suction tube incorporates a 3.33mm large‑lumen channel, 100mm working length, 30� angle, stylette, and cutoff hole for higher‑capacity suction. The design supports evacuation of thicker fluids and particulate debris.
This 10Fr Frazier suction tube is angled 30 degrees and features a stylette and thumb plate cutoff hole for surgeon-controlled suction modulation during delicate surgical dissection. The 100mm working length and 171mm overall length balance reach with control in confined fields. Its tapered design reduces trauma while maintaining efficient evacuation.