Your cart is empty!
The pediatric Deaver retractor presents a narrow 9.6mm curved blade for atraumatic retraction of the liver, intestine, and other deep abdominal viscera in pediatric and small‑field cases. The characteristic Deaver J‑curve places the blade tip beneath the structure being retracted while the long handle keeps the surgeon�s hand outside the operative field. Stainless steel construction is built for reliable performance across repeat clinical use.
Features & Benefits
S retractors are flat handheld blades designed for superficial wound edge retraction in dermatological and small surgical fields. The 5.5mm wide blade provides secure yet atraumatic lift without deep tissue compression. Sold in pairs, they enable bilateral symmetric retraction for optimal visibility and surgical access.
An "S" retractor set provides two paired 11mm wide handheld blades whose double‑curve profile holds skin and superficial soft tissue off the working axis. The opposing curves at each end let the surgeon and assistant choose the most useful end for the exposure. Stainless‑steel construction sustains the formed curves through repeat sterilization.
Abdominal spatula at 25mm wide and 330mm long with malleable construction permits intraoperative contouring to fit individual anatomy during abdominal or visceral retraction. The broad flat surface distributes pressure evenly, reducing tissue trauma. Malleability allows the surgeon to bend the blade to desired angle and then maintain position throughout the procedure.
Abdominal spatula at 50mm wide and 330mm long with malleable construction provides broad, atraumatic retraction and tissue protection across extensive abdominal or thoracic fields. The wide surface area distributes pressure evenly and reduces crush injury risk. Intraoperative bending allows customization to anatomical contours.
This 6mm-wide abdominal spatula combines malleable stainless steel construction with a straight blade geometry for gentle tissue retraction and separation. The narrow 6mm width supports precise blunt dissection in confined abdominal and retroperitoneal exposures. At 200mm length, it extends reach while maintaining the flexibility needed for atraumatic tissue handling.
This 8mm-wide abdominal spatula provides increased blade width for broader tissue retraction across laparotomy and general surgical exposures. The malleable construction enables intraoperative contouring to match anatomical contours. The 200mm length balances reach with maneuverability in deeper operative corridors.
This dura hook measuring 8" gently retracts delicate neural and vascular structures. Blunt tip design prevents inadvertent tissue trauma during dissection. Stainless‑steel construction provides reliable performance across many surgical cases.
Adson dura hooks in sharp pattern with 203mm straight shaft provide reliable dural engagement during neurosurgical procedures. The sharp hook design ensures secure tissue purchase during dural elevation and dissection. Straight geometry supports visualization of dural planes.
This delicate Alm retractor is engineered for precise exposure in narrow or confined surgical spaces. Its 4 × 4 configuration of blunt prongs (4mm × 8mm) distributes retraction force evenly across shallow fields. The finger-twist spread mechanism allows surgeon-controlled separation without ratcheting, ideal for pediatric or soft-tissue work where gentle manipulation is essential.
This slightly longer Alm delicate retractor (102mm) accommodates moderate-depth shallow exposures with the same 4 × 4 blunt-prong geometry. The adjustable finger-twist spread mechanism grants gradual control over prong separation. Its slender profile makes it ideal for pediatric surgery or fine soft-tissue work where instrument bulk must be minimized.
The delicate Alm retractor carries 4 × 4 sharp prongs at 3 × 8mm on an adjustable finger‑twist self‑retaining frame, sized for compact dermatologic and oculoplastic exposure. The fine sharp prongs lift skin without crushing, and the finger‑twist adjustment sets the spread without sustained operator force.
Designed for reliable field retraction in general surgical access with efficient blade geometry that protects underlying structures, this retractor combines stainless steel durability with straightforward design. The blade finish resists tarnishing through repeated sterilization cycles, while the handle geometry supports sustained tissue elevation. Overall construction minimizes fatigue during prolonged exposure.
The Aufranc Cobra retractor is designed for atraumatic hip and proximal femur exposures in orthopaedic arthroplasty. Its curved cobra‑shaped blade reaches beneath muscular and capsular structures while the rounded 10mm tip protects underlying neurovascular bundles. The hollow handle reduces fatigue during extended retraction.
Built for hip and acetabular exposure, this Aufranc Cobra retractor pairs a 32mm cobra‑shaped blade with a 10mm smooth pointed tip that anchors into bone while sweeping soft tissue clear. The hollow handle reduces overall weight during prolonged retraction, and the 267mm length suits deep orthopedic corridors. Stainless‑steel construction holds an edge and finish across repeat reprocessing.
The Aufranc Cobra retractor delivers a deep curved (J-shaped) blade for atraumatic liver, intestinal, or visceral retraction in open abdominal procedures. The 32mm blade width accommodates moderate-volume organ exposure, while the hollow ergonomic handle reduces fatigue during extended retraction. The serrated blunt tip prevents slipping on smooth organ capsules.
The Aufranc Cobra retractor delivers powerful periosteal and soft tissue retraction through its 32mm serrated pointed blade. The ergonomic hollow handle reduces hand fatigue during extended orthopedic exposures. The 267mm overall length provides leverage for deep wound retraction without manual assistant burden.
This Aufranc Cobra retractor features a 32mm blade with a smooth blunt 10mm tip and a hollow handle for lightweight control. The 254mm length supports deep exposure in orthopedic surgical approaches.
The Aufranc Cobra retractor at 254mm combines a 32mm blade with a smooth pointed 10mm tip for controlled blunt retraction in orthopedic and general surgical exposures. The hollow handle reduces instrument weight during prolonged use while maintaining structural rigidity. The straight geometry supports clean visual access to deep fracture sites and joint spaces.
Aufranc Cobra retractors, small blunt variant, with a 267mm straight shaft provide deep abdominal and orthopedic retraction with atraumatic tissue contact. The blunt curved blade protects underlying viscera during extended exposures. Small profile minimizes obstruction to visualization.
Senn-Miller 3 Prongs retractor measuring 6" provides reliable tissue exposure in surgical fields. Blunt geometry maintains retraction without tissue slippage or trauma. Stainless‑steel construction ensures durability across many surgical cases.
This wide Balfour abdominal retractor delivers up to 10� inches of self‑retaining spread, holding the adult abdomen open hands‑free during major laparotomy and bariatric exposure. The ratcheted frame adjusts spread without releasing the field, and the lateral blades distribute retraction pressure along the wound edge. Stainless steel construction is built for reliable performance across repeat clinical use.
Balfour abdominal retractors with 176mm lateral blade spread and 51mm depth provide standardized open laparotomy exposure. This set includes a 306mm center blade (80 × 48mm) and wire lateral blades, supporting flexible retraction geometry. The ratchet mechanism allows hands-free retraction during extended visceral exposure.
This adult Balfour abdominal retractor combines two pairs of interchangeable wire lateral blades (64mm and 88mm deep) with a 67 × 41mm center bladder blade on a ratcheted frame, holding the abdomen open hands‑free at a spread of 8� inches. The interchangeable blades let the surgeon match retraction depth to the case while the ratchet bar adjusts spread without releasing the field. Stainless steel construction is built for reliable performance across repeat clinical use.
The pediatric Balfour abdominal retractor combines two lateral blades and a center bladder blade on a ratcheted frame, holding the pediatric abdomen open hands‑free during laparotomy. The 35mm‑deep lateral blades and 22 × 22mm center blade are sized for smaller anatomy, while the 89mm spread accommodates pediatric incisions. Stainless steel construction is built for reliable performance across repeat clinical use.
These replacement Balfour wire lateral blades present a 3�‑inch (89mm) depth for deeper abdominal exposure on the standard Balfour frame. The wire construction reduces blade weight and tissue contact area while the rounded edges distribute retraction pressure along the wound margin. Sold as a matched pair for paired lateral retraction. Stainless steel construction is built for reliable performance across repeat clinical use.
These replacement Balfour wire lateral blades present a 4‑inch (102mm) depth for the deepest abdominal exposure on the standard Balfour frame. The wire construction reduces blade weight and tissue contact while the rounded edges distribute retraction pressure along the wound margin. Sold as a matched pair for symmetric lateral retraction. Stainless steel construction is built for reliable performance across repeat clinical use.
This Beckman-Weitlaner retractor combines hinged blades with a 3 × 4 blunt-prong configuration for controlled, atraumatic self-retaining exposure. The hinged design permits flexible blade angles, accommodating variable tissue depths and incision shapes. At 140mm, it bridges compact and standard operative fields.
The Beckman‑Weitlaner retractor adds hinged blades to the standard Weitlaner pattern, supporting deeper self‑retaining exposure during posterior spine, neuro, and ortho cases. The 3 × 4 blunt prongs and 17 × 22mm working face hold soft tissue open hands‑free across the case.
The Brewster retractor provides broad, atraumatic tissue separation with its curved convex 20 × 38mm blade design ideal for abdominal and deep-field retraction. The blade geometry distributes pressure across a larger contact surface, reducing tissue trauma. The 216mm length and stainless-steel construction ensure reliable, durable retraction across routine general surgical cases.