Your cart is empty!
These needle-nose locking pliers provide secure gripping force for wire and small-diameter fixation components in orthopedic assembly. The 300mm overall length extends reach into deep surgical fields, while the tapered tips access confined anatomical spaces. Stainless steel construction withstands routine sterilization and multiple case uses.
Features & Benefits
These precision needle‑nose pliers with 1mm tips manipulate small diameter wire and delicate orthopedic implants during minimally invasive reduction and fixation. The tapered jaw profile allows access into confined spaces within the joint capsule and around bony landmarks. At 130mm, they enable fine control in percutaneous procedures.
These needle-nose pliers feature fine-pointed jaws for grasping small bone fragments, pins, and hardware during orthopedic assembly and reduction. The precision tip design permits manipulation of fine hardware in narrow surgical spaces without bulk. Stainless-steel construction ensures corrosion resistance and durability through repeated sterilization and orthopedic case use.
The Novo-Bach chisel, curved with 16mm head and phenolic handle, enables controlled bone sculpting during orthopaedic procedures requiring angled approach geometry. At 270mm overall length, it provides extended reach and mechanical advantage for chisel-driven bone work. The phenolic handle offers insulation and ergonomic comfort during repetitive striking, while stainless steel sustains edge sharpness.
The Novo-Bach chisel, straight with 20mm head and phenolic handle, delivers broad, direct bone-cutting geometry in orthopaedic procedures. The 248mm length supports comfortable hand positioning and mechanical advantage, while the phenolic handle provides insulation and grip comfort. Stainless steel construction ensures edge sharpness and durability across routine sterilization and repeated clinical use.
Novo-Bach straight chisel (20mm head) delivers precise linear bone cuts in controlled orthopaedic exposures where sharp chisel geometry ensures clean intramedullary canal entrance and cortical separation. Phenolic handle provides secure grip during mallet-driven work and bone strikes. Nine-and-three-quarter-inch (248mm) length offers extended reach. Stainless‑steel sustains durability.
The Novo-Bach gouge combines curved geometry with a 10mm wide head for precise bone shaping and contouring during orthopedic reconstruction. Its phenolic handle absorbs mallet impact while the curved design enhances access to complex bony anatomy. At 254mm overall length, the instrument reaches moderately deep fields.
This Novo-Bach wider-head gouge (15mm) enters larger bone surfaces requiring bulk removal or sculptural contouring of periosteal regions. The phenolic handle maintains steady hand position across extended surgical exposures in high-demand work. Stainless‑steel construction supports durable performance across repeat clinical cases.
The Novo-Bach curved gouge delivers controlled bone removal across orthopaedic exposures requiring shaped cuts into periosteal surfaces and cancellous bone. Its 5mm wide head with phenolic handle architecture supports prolonged grip stability during osteotomy and bone sculpting work. Stainless‑steel construction sustains cleaning cycles and repeated surgical use across many cases.
The Novo-Bach gouge, straight with 15mm wide head and phenolic handle, enables broad bone removal and sculpting in orthopaedic procedures requiring larger-capacity scooping. The straight geometry and extended 254mm length support stable positioning and mechanical advantage. Phenolic construction and stainless steel ensure comfortable, durable performance across repeated operative cases.
The Novo-Bach gouge, straight with 5mm head and phenolic handle, provides fine bone-scooping capability in confined orthopaedic spaces. The straight geometry supports controlled scooping motion, while the extended 254mm length provides reach and mechanical advantage. Phenolic handle offers comfort and insulation, and stainless steel sustains durability across numerous sterilization cycles.
The Novo-Beau gouge-type screw distractor with 9mm wide head and phenolic handle provides controlled bone expansion and distraction in orthopaedic procedures requiring gradual separation of bone surfaces. The screw mechanism allows precise, incremental adjustment, while the 222mm length supports comfortable positioning. Stainless steel construction sustains durability across sterilization and repeated use.
The 25mm nylon replacement head for Combination Mallet #6 (M07600) restores the impact face after wear. The nylon surface delivers controlled strikes on osteotomes and chisels without metal‑on‑metal noise, and the threaded fit holds the head against repeated mallet impacts.
Nylon replacement cap for combination mallet fits 38mm diameter heads and restores protective striking surface for periosteal and chondral work. The 38mm diameter and slim 14.4mm height ensure proper fit on standard mallet shafts. Nylon material absorbs impact force while protecting underlying bone and cartilage.
The 25mm nylon replacement head for Combination Mallet #5 (M07400) restores the impact face after wear with the same nylon surface as other Combination Mallet replacements. The threaded fit holds the head against repeated mallet impacts.
This nylon replacement head fits the D6686 orthopedic mallet, restoring a controlled strike face for osteotome and chisel work without the rebound of metal-on-metal contact. The softer polymer absorbs impact noise while transmitting predictable force into the cutting edge along the cortical bone. Nylon construction is durable through repeated case use and tolerates standard reprocessing alongside the parent mallet.
The Obwegeser periosteal elevator with 11mm blade provides controlled separation of periosteum from bone surfaces during orthopaedic exposures and fracture preparations. The flat blade geometry allows sweeping motions along the bone-periosteum interface, while stainless steel construction maintains edge integrity and corrosion resistance across routine sterilization and use.
The Obwegeser wedge osteotome delivers controlled cutting action for bone shaping during orthognathic and corrective procedures. Its 8mm wide blade concentrates osteotomy force efficiently while the phenolic handle absorbs mallet shock and reduces hand fatigue. At 230mm overall length, the instrument reaches deep into jaw and facial bone anatomy.
Jacobs chuck orthopedic drill bits accommodate threaded chuck coupling for instruments configured with traditional drill handpieces. The 1.5mm flute threads fine pilot holes during delicate wrist, ankle, and small fragment fixation, and the 70mm overall length with 30mm working dimension suits confined surgical approaches. Reusable stainless steel maintains edge sharpness across repeated procedures.
This 2mm orthopedic drill bit with a Jacobs chuck fitting at 85/38mm working geometry drills cortical bone for screw, pin, and wire placement during orthopedic fixation. The Jacobs chuck fitting accepts the bit into standard hand and power drills.
Sized at 0.4 × 5.5 × 25.5mm with a 4 × 5 tooth pattern, this oscillating saw blade cuts through cortical bone under power during orthopedic osteotomy and arthroplasty. The narrow kerf preserves bone stock, and the defined tooth count delivers consistent cut quality across the working face.
The oval‑egg burr carries a 4mm head with a 7.9mm head length and an eight‑flute cutting pattern, sized for shaping and contouring cortical and cancellous bone. Sterile single‑use delivery preserves flute sharpness across the case, and the 54mm overall length suits standard handpiece chucking.
The Overholt periosteal elevator doubles utility through its two distinct ends, lifting periosteum from cortical and cancellous bone during exposure and soft‑tissue dissection. Size 3 designation indicates moderate width suited to standard fracture and spinal approaches. Its double‑ended design reduces instrument count.
These parallel-jaw pliers provide consistent flat-face engagement for wire bending and manipulation in orthopedic frame assembly. The side-cut configuration allows surgeons to section wires cleanly without jaw deflection. The 185mm length and straight geometry support precise control during intraoperative adjustment of external fixation systems.
The Partsch hexagonal-handled mallet in this shorter variant (181mm) delivers controlled percussion to bone and periosteum with a 22mm cylinder head. At 6oz, the lightweight profile reduces surgeon fatigue during delicate laminal and foramen approaches. Stainless steel provides lasting clinical durability.
The Passow osteotome with 2.5mm narrow blade and 121mm compact length enables precise bone cutting in fine orthopaedic work, particularly in revision procedures and delicate anatomic areas. The straight geometry supports controlled hammer-driven cuts, while stainless steel construction ensures edge sharpness and durability across repeated sterilization and use.
The Passow osteotome with 3.5mm blade provides moderate-width cutting capacity in compact 121mm format, balancing precision with broader bone-removal capability. The straight geometry delivers controlled cuts in orthopaedic procedures, while stainless steel resists corrosion and maintains edge quality across numerous sterilization cycles and clinical cases.
This patella forceps captures and stabilizes the patellar bone during reduction and fixation of fractures and osteotomy sites. The 2 × 2 teeth pattern creates point‑contact grasp without crushing the articular cartilage or fragile fragments, and the speed lock mechanism allows rapid one‑handed clamping. At 178mm, it provides optimal reach for open knee exposures.
These pelvic reduction forceps with 1 × 2 jaw configuration and long pointed ball tips engage pelvic fragments with precision during fracture reduction. The ball-tip geometry distributes reduction force without crushing cancellous bone, and the 400mm extended length reaches deep pelvic anatomy. Stainless steel construction sustains routine sterilization across many surgical cycles.
These short pelvic reduction forceps combine angled-inward jaws with short pointed-ball tips and ring handles for controlled reduction in confined pelvic and acetabular spaces. The angled geometry improves approach angle, and the 250mm length balances reach with precise control. Stainless steel durability ensures reliable sterilization and clinical reuse.