Your cart is empty!
The Jones‑Inamura capsulorhexis forceps in stainless steel delivers reliable performance for precise capsular manipulation during phacoemulsification. The round handle provides secure grip and tactile control when engaging and tearing the anterior lens capsule. The forceps supports reproducible capsulorhexis architecture across routine and challenging cases.
Features & Benefits
The Kellan capsulorhexis forceps provides the precision geometry necessary for controlled anterior capsule engagement and continuous curvilinear capsulorhexis creation. The straight 100mm shaft and tactile jaw design support repeatable rhexis initiation and controlled tearing dynamics across hundreds of cases.
The Kershner capsulorhexis forceps combines titanium construction with extremely thin straight shanks and cystotome-shaped tips for ultra-precise anterior capsule manipulation. The 11.5mm tip-to-bend dimension allows controlled engagement of the capsule edge, while the Nordan-style round handle with flats supports intuitive grip orientation during rhexis creation.
The Kershner Utrata forceps combines an extremely thin, sharp triangular grasping tip with an angled 11.5mm bend and flats on a round knurled handle, creating a precision capsulorhexis instrument. The triangular jaw geometry grasps and initiates the continuous curvilinear capsulorhexis without tearing, while the guide pin aids in sizing and edge control. At 105mm, the angled shaft maintains optimal visualization throughout the procedure.
The Kraff capsulorhexis utrata forceps delivers extra-fine tip control for creating a continuous curvilinear capsulorhexis in cataract surgery. The 13mm bend-to-tip measurement optimizes approach angles for anterior capsular engagement, while the slender instrument geometry supports precision grasping through small corneal incisions. At 102mm overall length, it balances reach with delicate handling.
These Kraff Utrata capsulorhexis forceps incorporate recessed titanium jaws with a sharp tip and 1mm laser lines for intraoperative reference. The design supports controlled capsular flap advancement during continuous tear creation.
The Kraff Utrata forceps is a precision capsulorhexis instrument designed for controlled anterior capsule manipulation. Its 11mm bend-to-tip geometry provides ergonomic access to the capsular rim during cataract surgery. The round handle supports tactile control and reduced finger fatigue during extended procedures.
This Kraff‑Utrata capsulorhexis forceps features titanium construction and angled blunt tips for controlled anterior capsular opening during phacoemulsification. The round handle and compact 102mm length support fingertip control and tactile feedback at the limbus and capsular edge. Titanium composition resists corrosion and maintains edge sharpness across repeated cases.
The Kraff-Utrata capsulorhexis forceps combines titanium construction with extremely thin shanks and sharp 0.4mm tips to enable precise anterior-capsule creation during cataract surgery. The round handle with grooved surface provides secure fingertip control during delicate curvilinear capsular manipulation. At 100mm with 11mm tip-to-bend geometry, proportions support optimal anterior-chamber visualization and tactile feedback.
The Lehner‑style capsulorhexis forceps is optimized for gentle, controlled circular capsulorhexis in patients with weak or cataractous anterior capsules. Its gently curved shaft, 2mm platform, and flat handle combine to deliver precise tissue purchase without perforation. Dull finish and compact 80mm length support meticulous, microsurgical precision during critical capsular membrane work.
The round handle on this Lehner‑Utrata capsulorhexis forceps enables natural rotation and tactile control throughout the procedure while maintaining fine tip precision. The extremely thin triangular tip geometry supports precision grasping with minimal tissue damage. The round handle supports natural rotation and tactile feedback during the procedure.
The MacKool‑Inamura coaxial capsulorhexis forceps features a blunt tip that safely engages the anterior capsule during phacoemulsification via coaxial probe access. The round ergonomic handle accommodates variable hand sizes and grip styles, supporting consistent capsulorhexis creation across routine and challenging cases. The blunt tip reduces risk of capsular perforation in dense nuclei.
The MacKool‑Inamura capsulorhexis forceps features cross‑action tips angled 45 degrees from the shaft with a 1.5mm width at the pivot point, enabling entry through incisions as small as 1.8mm. The 11mm bend‑to‑tip geometry and laser‑marked shaft (2.5mm/5mm) guide consistent capsulorhexis sizing. The long flat ergonomic handle reduces hand fatigue during delicate tissue manipulation.
The Maloney capsulorhexis forceps combines gently curved titanium jaws with ultra‑fine tips suited to precise continuous circular capsulorhexis in routine and microincision cases. The titanium construction offers reduced weight and corrosion resistance. The gentle curve and fine tips enable controlled capsular flap creation without tearing.
These Sinskey tying forceps feature curved delicate tapered smooth jaws with a three‑hole spring handle, supporting controlled suture guiding across curved scleral surfaces.
The Masket capsulorhexis forceps is built for extremely delicate anterior capsule manipulation during phacoemulsification. Its angled vaulted shanks and triangular grasping tips create a near‑tactile interface with capsular tissue, minimizing perforation risk during continuous curvilinear capsulorhexis. Stainless steel construction ensures durability during the precision work required at the capsular margin.
The Masket Utrata Capsulorhexis Forceps is specifically engineered for initiation and completion of the anterior capsular opening in cataract surgery. Its extremely delicate vaulted angled shafts and triangular grasping tips engage the anterior capsule edge with minimal trauma and slip resistance. The 11mm bend‑to‑tip geometry and three‑hole handle enable controlled, stable corneal curvature engagement during the critical rhexis maneuver.
This 23‑gauge MICS forceps pairs serrated jaws with a titanium squeeze handle for precise capsulorhexis and cortical manipulation in micro‑incision cataract surgery. The 0.6mm tip maintains fine tactile feedback during anterior chamber work. Titanium construction combines rigidity with corrosion resistance over many cases.
The MICS Capsulorhexis Forceps is engineered for anterior capsular opening in microincision cataract surgery through 1.8mm-2.2mm incisions. Its titanium construction ensures durability while the 23ga curved shaft minimizes incision trauma and wound deformity. The micro grasping tips provide delicate capsular engagement without slipping, enabling controlled rhexis initiation and progression through ultra-small incisions.
The MICS capsulorhexis forceps integrate vaulted titanium shafts with blunt tips and cross‑action flat handle for mini‑incision cataract surgery. The vaulted geometry maintains ergonomic wrist position through a 1.8mm to 2.2mm incision, while the blunt tips prevent capsular nick during continuous rhexis initiation. Titanium construction provides durability across high‑volume MICS workflows.
The Seibel capsulorhexis forceps is a 23‑gauge MICS instrument designed with etched rhexis marks spanning 1 to 6 millimeters for controlled anterior capsule opening. The curved shaft provides natural anterior chamber access in micro‑incision workflows, while the sharp tips and engraved sizing guides support reproducible circular opening creation. Stainless‑steel construction is built for reliable performance and lasting durability across repeat clinical use.
The MICS Seibel capsulorhexis forceps is purpose‑built for micro‑incision cataract surgery, combining a 23ga curved shaft with blunt grasping tips and etched rhexis marks from 1 to 6mm. The fine gauge and precise tip geometry enable controlled capsular rim engagement without corneal incision enlargement. Use with the DUO‑00 modular handle for stable bimanual capsulorhexis creation in MICS cases.
These Nevyas custom MICS Utrata forceps use cystotome‑style tips with laser reference lines at 5.5mm, 6mm, and 6.5mm. The ultra‑delicate jaws open to 1.75mm and sit on an angled shaft with an 11mm bend for precision capsulotomy control.
The Nevyas-style Utrata capsulorhexis forceps delivers ultra-delicate control during anterior capsule manipulation. Its angled 102mm shaft with extremely thin construction and 11mm bend-to-tip geometry allows smooth positioning through small clear corneal incisions. The small sharp cystotome tips engage the capsule with minimal trauma, while the three-hole handle ensures stable fingertip control throughout continuous curvilinear capsulorhexis.
This O'Gawa‑Utrata capsulorhexis forceps features angled shafts optimized for clear corneal access during anterior capsular manipulation and continuous capsulorhexis. Titanium construction combines exceptional rigidity with superior corrosion resistance for lasting durability across many surgical cases. The round handle supports natural rotation and tactile feedback during the procedure.
The O'Gawa‑Utrata capsulorhexis forceps is engineered for controlled, circular continuous capsulorhexis during phacoemulsification. Its fine angled tips, 11.5mm angled shafts, and iris stop feature provide safe, repeatable anterior capsule grasping without perforating the membrane. The round handle and dull finish support secure handheld control, while the 100mm overall length facilitates optimal ergonomic positioning.
The fine O'Gawa‑Utrata capsulorhexis forceps provides secure grasping and controlled capsular incisions throughout continuous capsulorhexis. Angled shaft geometry improves approach angle and visualization during clear corneal capsulotomy. The round handle supports natural rotation and tactile feedback during the procedure.
These original Giannetti‑Dacamara MICS capsulorhexis forceps maintain titanium vaulted shanks and vertical vaulted delicate tips with a 2mm jaw opening. The round handle with vertical grooves improves directional stability through a 1.5mm incision.
The original Kraff Utrata capsulorhexis forceps is a straight‑shaft design engineered for controlled anterior capsule opening in phacoemulsification. At 102mm overall length, the geometry provides balanced reach and maneuverability within the anterior chamber. Stainless‑steel construction is built for reliable performance and lasting durability across repeat clinical use.
This Silverstein‑Utrata capsulorhexis forceps balances fine tip precision with ergonomic handle design for comfortable extended procedures. Angled shaft geometry improves approach angle and visualization during clear corneal capsulotomy. The flat handle delivers ergonomic stability for extended procedures.