Your cart is empty!
A Lambotte osteotome with a 50mm curved blade is engineered for maximum-volume bone removal in major reconstruction and spinal procedures. The broad, robust curved profile maintains sharp geometry across extensive clinical use and tolerates forceful mallet application. The 250mm overall length provides reach for varied surgical depths and complex anatomical approaches.
Features & Benefits
A Lambotte osteotome with a 6mm curved blade is designed for precise bone sculpting in procedures requiring controlled, contoured removal. The curved blade geometry follows natural osseous anatomy, reducing stress concentration and supporting smooth separation. The 250mm overall length accommodates varied surgical depths and approach angles.
This Lambotte osteotome features an 8mm curved blade for controlled bone removal in moderately sized reconstructive fields. The curved profile maintains even contact across the osseous surface, distributing mallet force smoothly and supporting clean cortical separation. The 250mm overall length provides reach for deeper surgical approaches.
The full‑size Lambotte osteotome at 25mm (1") wide opens the cut profile for major cortical osteotomies in long‑bone work. The 229mm length provides the mechanical leverage needed for larger‑bone cuts under mallet impact, and the straight planar edge holds geometry through repeat strikes.
Lambotte osteotome, straight 38mm wide, performs broad bone section and cortical osteotomy during large‑fragment orthopedic reconstruction. The expansive 38mm cutting edge completes wide bone cuts in single or few blows, reducing operative time. The 230mm overall length provides leverage and field reach.
Widening to 32mm (1‑1/4"), this straight Lambotte osteotome makes the broadest cortical cuts in the standard Lambotte set, suited to large‑bone osteotomies and major reconstruction. The 229mm body delivers leverage for sustained mallet work, and the planar edge maintains its line through repeat strikes.
This Lambotte osteotome presents a straight 13mm cutting edge on a 230mm shaft for sectioning cortical bone during osteotomies and bone graft harvest. The flat bevel translates mallet impact directly along the bone axis, producing a clean kerf with minimal periosteal disruption. Stainless‑steel construction holds the cutting edge through repeated sharpening and steam sterilization.
Lambotte osteotome, 6mm wide and straight, delivers controlled cutting force for bone osteotomy, fusion site preparation, and fracture reduction. The 230mm length provides mechanical advantage and hand control during hard bone work. Stainless steel ensures durable edge retention and reliability for repeated surgical use.
Thirteen-millimetre Lambotte straight osteotome enters larger orthopaedic bone-removal phases where vertebral and metaphyseal osteotomies require aggressive linear cuts and substantial cortical trimming. The 9.75-inch (248mm) length provides extended reach throughout the surgical field. Stainless‑steel composition ensures lasting clinical performance.
Sixteen-millimetre Lambotte straight osteotome executes broad linear bone cuts in major orthopaedic exposures requiring extensive vertebral body or periosteal sculpting and cortical removal. The 9.75-inch (248mm) length supports reach and control throughout extended anatomic fields. Stainless‑steel blade sustains multi-case service.
Eighteen-millimetre Lambotte straight osteotome handles extended bone-removal work in large orthopaedic fields where vertebral body sculpting and laminar contouring demand wider cutting geometry and substantial force. Nine-and-three-quarter-inch (248mm) length provides reach and mechanical advantage. Stainless‑steel sustains durability.
Twenty-millimetre Lambotte straight osteotome addresses major bone cuts in high-volume orthopaedic exposures requiring wide linear osteotomies for vertebral body contouring and improved access. Nine-and-three-quarter-inch (248mm) length balances leverage with intraoperative control throughout extended work. Stainless‑steel sustains multi-case performance.
Thirty-millimetre Lambotte straight osteotome handles the broadest linear bone cuts in major trauma and large-scale orthopaedic exposures requiring maximal single-stroke removal across vertebral and periosteal surfaces. Nine-and-three-quarter-inch (248mm) length provides stable reach throughout the extended work. Stainless‑steel sustains service.
The full-size Lambotte osteotome provides a 38mm wide blade for large-scale bone shaping and reconstruction procedures. Its straight design concentrates cutting force along a single plane for reproducible results. At 250mm overall length, the instrument reaches deep surgical fields while maintaining excellent balance.
Forty-four-millimetre Lambotte straight osteotome executes extra-wide bone cuts in massive orthopaedic exposures where bulk vertebral body removal and extensive periosteal sculpting demand maximum cutting surface area. Nine-and-three-quarter-inch (248mm) shaft provides stable reach in major surgical fields. Stainless‑steel sustains durability.
Small straight Lambotte osteotome (4mm blade) enables precision bone cuts in confined orthopaedic spaces where delicate osteotomies near vertebral bodies and laminae require sharp, controlled entry. Nine-and-three-quarter-inch (248mm) length provides reach without bulk or excessive leverage. Stainless‑steel composition ensures durable performance.
Fifty-millimetre Lambotte straight osteotome delivers the maximum-width linear cuts in the most extensive orthopaedic exposures requiring aggressive vertebral body and periosteal contouring across large bone surfaces. Nine-and-three-quarter-inch (248mm) length maintains intraoperative control in major surgical fields. Stainless‑steel sustains durability.
Six-millimetre Lambotte straight osteotome addresses moderate-width bone cuts in controlled orthopaedic fields requiring selective vertebral body or laminar osteotomies throughout the exposure. The 9.75-inch (248mm) shaft provides stable reach and mechanical leverage. Stainless‑steel blade sustains multi-case use.
Eight-millimetre Lambotte straight osteotome handles wider linear bone cuts in mid-field orthopaedic exposures where vertebral contouring and laminar work benefit from increased cutting width. The 9.75-inch (248mm) length balances reach and intraoperative control throughout the procedure. Stainless‑steel sustains durability.
The mini Lambotte osteotome (curved, 15mm) offers a wider curved profile for following bone anatomy during corrective osteotomy and fracture shaping in small joint surgery. The 127mm length maintains maneuverability in confined spaces, while the standard curve aligns with natural bone contours and improves bleeding field visibility during the cut.
Built for compact osteotomy work, this mini Lambotte osteotome delivers a curved 18mm cutting edge for shaping cortical bone in restricted exposures. The 127mm overall length keeps the instrument balanced for fingertip and palm control during controlled mallet strikes against bone and periosteum. Stainless‑steel construction holds the edge through repeat sharpening cycles and routine sterilization.
The mini Lambotte osteotome (curved, 10mm) combines a slightly wider curved blade with 127mm length for osteotomy and shaping along natural bone contours in small joint and corrective surgery. The standard curve improves visualization and follows the anatomy of smaller bones, while the straight working plane supports controlled force distribution without lamellar separation.
Mini Lambotte osteotomes serve fine cortical cuts in hand, foot, and small‑joint orthopedic procedures. This 10mm wide straight edge sits on a compact 130mm shaft, giving the surgeon close control over osteotomy lines on phalangeal and metatarsal bone. Stainless steel construction holds the cutting edge through repeated mallet impaction and routine reprocessing.
This straight mini Lambotte osteotome delivers perpendicular force application with its 12mm blade, suited to direct bone cuts in tighter surgical fields. The straight geometry avoids hidden dissection and maintains clear visualization of the vertebral body and laminar surfaces. Compact 127mm length preserves surgical precision in confined approach work.
Mini Lambotte osteotome with a 14mm straight blade strikes a balance between cutting width and fine control during vertebral body and cortical bone work. The 127mm length is well-suited to compact exposure fields, while stainless steel ensures repeated use without edge breakdown.
The mini Lambotte osteotome (straight, 15mm) provides a wider straight blade for efficient bone division in foot corrective surgery and small‑fragment fixation. The 127mm compact length suits arthroscopic and limited‑open exposures, while the straight geometry permits parallel cut faces ideal for fragment alignment and fixation.
This mini Lambotte osteotome features an 18mm straight cutting edge for broad yet controlled bone sectioning during facet joint and vertebral body exposures. The straight profile ensures predictable osteotomy geometry, and the 127mm compact length minimizes uncontrolled torque during mallet delivery.
Sized at 19mm wide, this Mini Lambotte osteotome bridges the gap between the standard Mini widths and the full‑size Lambotte. The 127mm body keeps the working face close to the surgeon's hand for fine tactile control, while the wider edge handles moderate cortical cuts in foot, ankle, and small‑bone work.
Mini Lambotte osteotome with a straight profile and 20mm cutting edge is engineered for controlled bone sectioning and osteotomy work in compact surgical fields. The compact 127mm length and stainless steel construction provide reliable cutting performance across multiple cases without dulling or corrosion.
The Mini Lambotte osteotome at 2mm wide handles the smallest cuts in hand, foot, and craniofacial work where fine osteotomies must be placed without disturbing surrounding bone. The 127mm length keeps the working face close to the surgeon's hand for fine tactile control, and the straight edge produces clean planar cuts under mallet impact.