Your cart is empty!
Select a category below to browse instruments
Categories
Browse Instruments
At 30ga, this anterior chamber cannula carries the finest practical lumen for delicate intraocular fluid delivery, with an 8mm bend‑to‑tip extending the outlet across the chamber. The micro‑gauge minimizes turbulence near sensitive structures, suited to careful viscoelastic refill or fine irrigation.
Features & Benefits
This 27ga hydrodissection cannula features a flat‑bend tip with an 8mm working length, supporting controlled fluid delivery beneath the anterior capsule during cataract surgery. The flattened distal profile slides smoothly beneath the rim, distributing balanced salt solution to separate cortex from capsule. The fine gauge minimizes incision distortion and turbulence.
Designed for LASIK irrigation and interface flushing, the Slade cannula features a 26ga formed shaft measuring 22mm. The pre‑formed contour reaches beneath the corneal flap to clear debris and hydrate the stromal bed without disturbing flap edges. Stainless steel construction holds the formed profile through repeated maneuvering.
Flexible polypropylene construction lets this iris retractor pass through a paracentesis incision and engage the pupil margin for intraoperative dilation during cataract or anterior segment work. A silicone stopper slides along the shaft to fine‑tune pupil expansion case by case. Each sterile pack contains five retractors, with six packs per box for high‑volume rotations.
Angled at 15 degrees with a 3mm blade and a blue screw‑in tip, this micro knife creates side‑port and paracentesis incisions for cataract and anterior segment work. Single‑use sterile delivery preserves the sharp cutting edge, and the screw‑in format gives a secure connection to the included handle.
The Bishop‑Harmon irrigating cannula delivers measured anterior segment irrigation through a 19ga lumen, well suited to chamber re-formation and washout during cataract and corneal work. Its single‑use sterile format eliminates lumen‑clog risk associated with reprocessed irrigators. Compatible with standard luer syringes for surgeon‑controlled flow.
This Sub‑Tenon anesthesia cannula with beveled‑down tip is designed for safe posterior sub‑Tenon anesthetic placement during ophthalmic surgical anesthesia. The 25 gauge curved design with 13mm length allows gentle atraumatic advancement while the beveled tip enhances precision and reduces scleral irritation. Sterile single‑use delivery maintains case‑to‑case consistency in anesthetic coverage.
These universal clear plastic eye shields carry eight ventilation holes for postoperative protection of the operative eye, allowing air circulation while shielding the surface from incidental contact. The 100‑per‑package format supports clinic and hospital inventory.
The 8mm short trephine cuts small to mid-sized tissue specimens and creates precise anterior chamber apertures. Single-use design eliminates the sharpness variability of multi-cycle instruments, ensuring consistent graft margins and smooth epithelial transitions. Pre-sterilized pouch packaging supports rapid surgical deployment.
This 25‑gauge curved lacrimal cannula at 28mm working length delivers irrigation to the lacrimal canalicular system during evaluation of nasolacrimal patency and dacryocystorhinostomy planning. The curved profile follows the canalicular anatomy, and the sterile single‑use format preserves cleanliness.
The 0.5mm Algerbrush II replacement burr is sized for atraumatic removal of superficial corneal foreign bodies and rust rings. Each burr is delivered individually sterile within a five‑per‑box configuration, supporting clean case turnover in clinic or OR settings.
An angled 27ga shaft with a 6mm bend‑to‑tip equips this anterior chamber cannula for irrigation and viscoelastic management beneath the corneal incision. The intermediate bend length gives the surgeon room to maneuver near the iris plane while keeping the outlet within the central chamber.
This anterior chamber cannula with 8mm bend provides extended reach into the posterior anterior chamber for deep hydrodissection and cortex manipulation. The 19ga gauge balances flow and maneuverability, while the straight curvature profile conforms to the corneal incision profile. Single‑use sterility guarantees consistent sharpness and eliminates reprocessing fatigue.
This ultra‑fine 30ga anterior chamber cannula enables precise fluid delivery and micro‑irrigation in sensitive anterior chamber environments during phacoemulsification and corneal procedures. The 11mm bend‑to‑tip geometry provides extended reach without excessive manipulation, while the micro‑gauge lumen supports low‑pressure flow. Single‑use sterility guarantees consistent performance.
This tri‑port sub‑Tenon cannula delivers even anesthetic distribution into the posterior sub‑Tenon space during ophthalmic anesthesia. The 19 gauge curved shaft with tri‑port tip and 25mm working length aligns with scleral anatomy while the multiple ports ensure diffuse anesthetic spread without high‑pressure jetting. Sterile single‑use delivery provides consistent anesthetic coverage case‑to‑case.
Suited for clear corneal tunnel dissection, this 2mm angled crescent blade carries a beveled‑up edge for graded lamellar work. The crescent geometry tunnels through the cornea in a controlled plane ahead of phaco entry, while the angled shaft preserves the surgeon's view of the cutting tip. Sold individually sterile with six per box.
This 2.4mm phaco slit knife combines an angled shaft with a single beveled‑up edge for micro‑coaxial cataract entry. The narrower blade width suits sub‑2.5mm incision protocols and preserves wound architecture for self‑sealing closure. A full handle supports consistent fingertip rotation through the keratome path.
Built for phacoemulsification entry, this angled 2.85mm slit knife features a beveled‑up blade on a full round‑stock steel handle. The geometry produces a clean self‑sealing keratome incision sized for standard phaco tips, while the round handle profile supports balanced fingertip rotation during entry. Sold individually sterile with six per box.
The short variant of the 8.25mm disposable trephine pairs the fine‑increment cutting diameter with a compact handle for surgeons preferring a shorter grip. Single‑use sterile delivery preserves the sharp circular blade across the case.
This straight 27ga anterior chamber cannula provides a 22mm (7/8 inch) shaft for delicate intraocular fluid delivery and viscoelastic placement. The fine gauge minimizes turbulence and corneal wound distortion, supporting precise work in chamber maintenance and IOL implantation. The straight profile preserves a direct working axis.
Designed for retrobulbar and peribulbar block delivery, this 23ga Atkinson needle provides a 7/8 inch shaft for measured advancement around the globe. The Atkinson tip geometry blunts the bevel to reduce vascular trauma while maintaining tactile feedback as the needle passes through orbital tissue. The gauge balances anesthetic flow with controlled placement.
These cellulose eye spears absorb fluid and blood from the operative field during ophthalmic surgery, with 10 spears per pouch in 20 pouches per box (200 units total). The lint‑free cellulose surface lifts material without leaving fibers in the surgical field.
Featuring a 2 × 2mm J‑shape working tip on a 27ga 22mm shaft, this cannula directs irrigation along the J profile for sub‑iris and peripheral chamber access. The fine lumen preserves low‑turbulence flow while the J geometry keeps the tip clear of the visual axis. Supplied sterile in single packages with a 10‑unit minimum.
Featuring a J‑shaped working tip on a straight 25ga, 22mm (7/8 inch) shaft, this cannula supports directional fluid delivery and viscoelastic placement in confined anterior segment work. The J bend redirects flow laterally, useful for cleaning beneath the iris or seating an IOL haptic. The slim shaft passes cleanly through standard side‑port incisions.
The Lindstrom LASIK cannula features a 25ga formed shaft with three ports for distributed irrigation beneath the corneal flap. The triple‑port arrangement diffuses balanced salt solution along the stromal interface to clear debris without jetting at the flap edge. Pre‑formed contour preserves alignment with the corneal surface.
This Simcoe cortex extractor combines a curved 23ga lumen with a specialized tip geometry for atraumatic cortical removal during cataract surgery. The standard curve supports access to the peripheral cortex, while the fine gauge minimizes chamber disturbance during aspiration. Sterile, single‑use delivery ensures consistent extraction quality.
The 5mm green‑coded micro knife angled 15 degrees on a full handle creates side‑port and paracentesis incisions sized for the wider working faces of complex anterior segment cases. The full handle supports a stable single‑stroke entry, and color coding identifies the blade at a glance.
This stab blade angled 15 degrees with a 5.7mm screw‑in tip creates focused stab incisions for drain placement and trocar entry where a defined entry geometry is needed. The screw‑in fitting secures the blade to compatible handles, and the sterile six‑per‑box format suits routine OR stocking.
This angled slit knife features a 3mm blade optimized for the anterior chamber access needed in corneal and cataract entry procedures. The angled geometry improves visualization and instrument approach angle during tight paracentesis and refractive incisions. Disposable single‑use design preserves blade sharpness for predictable incision creation.
These PVA lint‑free eye spears absorb fluid and debris at the operative field without shedding fibers into delicate ophthalmic tissue. The polyvinyl‑alcohol head wicks consistently for clean wound visualization, while the dark blue handle provides high‑contrast visibility against drapes. Packaged five spears per pouch with 20 pouches per box for 100 sterile units.
Our sales specialists are available Monday through Friday, 9am to 5pm EST.