Your cart is empty!
Select a category below to browse instruments
Categories
Browse Instruments
Green pin covers sized at 1.57mm (0.062 inches) provide protection for larger diameter orthopedic pins and implant hardware. The non‑sterile bulk packaging (100 units per bag) enables cost-effective inventory stocking and field organization during multi-pin fixation cases.
Features & Benefits
These light blue pin covers are sized at 0.89mm diameter to accommodate fixation pins and hardware in orthopedic applications. The non‑sterile bulk format (100 units per bag) supports efficient OR inventory management. Protective sleeves guard the operative field from sharp pin edges.
This non‑sterile pin cover measures 1.14mm diameter and is supplied in quantities of 100 units per bag. The white polyethylene construction protects surgical pins from contamination and moisture while allowing inspection of underlying fixation hardware. Ideal for orthopedic and trauma applications.
These sterile yellow pin covers fit orthopedic pins and fixation hardware ranging from 0.028 to 0.062 inches in diameter, protecting exposed pin sites during recovery and dressing changes. Supplied as pre‑sterilized 60 units per pouch, they support efficient sterile field preparation.
These long clear retractor guards measure 38mm and provide extended protective coverage for retractor tips. The design supports safe processing and storage of elongated instruments.
Clear retractor guards at 50.8mm length shield instrument tips and blades during case breaks and between-case handling. The transparent thermoplastic allows visual confirmation of guard seating without removal. Bulk packing of 45 guards per bag supports high-volume OR inventory.
Supplied 100 per bag with 11 each of standard sizes plus 12 of pattern 16‑2011, these vented clear instrument guards cover a working set of mixed instrument tips through sterilization and storage. The vent pattern supports steam penetration during autoclaving, and the latex‑free material suits sensitivity‑restricted environments.
This Sterion same‑day tape remover is supplied in a 1‑gallon container for effective removal of adhesive identification tapes.
This universal blue plastic instrument guard is designed to fit a range of rigid and semi‑rigid surgical instruments, protecting optics, tips, and working surfaces during storage and transport. The reusable plastic construction withstands routine cleaning and sterilization without deteriorating. The open design accommodates various shaft diameters and geometries.
This universal blue plastic carrier holds instrument sets through cleaning and sterilization without a cover, leaving instruments visible during inspection. The plastic build is lightweight and corrosion‑resistant across repeat steam cycles. The open format suits departments that pair the carrier with separate lid options or wrap.
This assorted duo-guard collection packs 50 total guards in a range of white, blue, and tinted sizes (SKU groups 16-3031 through 16-3034 at 8 each, and 16-3035 through 16-3037 at 7 each), providing flexibility for mixed instrument-set sterilization. Vented design supports efficient steam penetration, and the assorted sizing accommodates diverse instrument geometries. Polymer construction withstands repeated cycles.
These blue vented duo guards measure 2 × 19.1mm and pack 50 per case, accommodating slightly larger instrument pairs while maintaining ventilation efficiency. The color-coded tint supports rapid sterilization-set organization, and the dual-opening geometry protects two adjacent tips simultaneously. Polymer construction is reusable across multiple autoclave cycles.
These white vented duo guards measure 1.6 × 19.1mm and pack 50 per case, designed for paired-instrument configurations common in microsurgical and ophthalmic procedures. Ventilation ports reduce steam trapping while dual-opening design accommodates two adjacent instrument tips. Reusable polymer withstands multiple sterilization rounds.
Packaged 100 per pack, these vented clear instrument guards measure 1.7 × 9.5 × 25mm to cradle fine instrument tips through reprocessing. The vent ports let steam penetrate the sleeve during autoclaving so internal surfaces dry fully. Latex‑free material avoids cross‑sensitivity concerns in mixed clinical settings.
These vented clear polystyrene instrument guards protect delicate instrument tips and edges during storage, transport, and sterilization without compromising ventilation. The 2 × 16 × 25mm dimensions accommodate standard microsurgical and specialty instruments. Latex‑free construction supports allergy‑sensitive environments.
These clear vented instrument guards at 3 × 25 × 25mm protect cassette‑style instrument tips during transport and sterilization, with the vented holes allowing steam penetration during autoclave cycles. The clear material allows visual identification of the protected tip.
These solid green radiopaque vented instrument guards measure 2.8 × 19mm and contain 100 units per package. The vented design allows steam penetration during sterilization while protecting instrument edges. Radiopaque composition provides imaging visibility if inadvertently left in tissue.
These solid red radiopaque vented instrument guards measure 3.2 × 25.4mm and contain 100 units per package. The vented holes support steam circulation during autoclave cycles while providing solid protective coverage. Radiopaque material ensures visibility in imaging studies if retained.
Vented instrument guards in solid white measure 1.6 × 19mm and feature radiopaque fill for visibility in imaging studies. The vented design allows steam penetration during autoclaving while protecting delicate tips. Each package contains 100 guards, providing substantial inventory for instrument sets and backup protection.
This vented MIS instrument guard accommodates minimally invasive surgical instruments with slender profiles. The 1.7 × 0.5 inch dimensions protect instrument tips while maintaining sterilization ventilation. Vented construction prevents condensation and promotes rapid drying.
This larger vented MIS instrument guard protects longer or slightly wider minimally invasive instruments. The 2.25 × 10mm aperture accommodates varied MIS tool geometries while maintaining sterilization ventilation. Durable polystyrene construction resists repeated use cycles.
This vented minimally invasive surgery instrument guard measures 10.2 × 10mm and is designed for fine endoscopic and laparoscopic instruments requiring compact protection. The vented design enables steam sterilization while maintaining edge integrity. Ideal for MIS-focused case carts and sterilization trays.
Vented minimally invasive surgery instrument guards at 20.3mm × 5mm accommodate the thin shafts characteristic of laparoscopic and endoscopic instruments. The vented design allows steam sterilization while protecting delicate tips. The narrow bore diameter minimizes profile during compact instrument tray storage.
Vented osteotome guards at 1/4" × 3/4" cover beveled bone‑cutting edges while allowing steam penetration during autoclaving. The slotted profile keeps tips protected on the tray without trapping condensate. Sized for standard osteotomes, they reduce edge damage from tray contact.
These vented osteotome guards measure 9.5 × 25.4mm and are designed specifically to protect bone-cutting instruments during sterilization and storage. The vented design allows steam circulation while providing edge protection. Ideal for orthopedic and specialty surgical set organization.
These blue‑tint vented osteotome guards at 1/4 × 3/4" protect osteotome cutting edges during transport and sterilization. The vented holes allow steam penetration during autoclave cycles, and the blue tint identifies osteotome guards from other instrument protectors.
These vented osteotome guards feature blue tint, pack 50 per case, and are sized to accommodate osteotome and chisel tips used in orthopedic and spinal procedures. The ventilation ports reduce steam trapping during autoclave cycles, improving sterilization reliability. Color coding supports rapid surgical-set organization for high-volume orthopedic operations.
These green-tinted vented specialty guards measure 38.1mm in length and accommodate tip sizes 4 through 4.9mm, designed for rigid endoscopes, trocars, and colostomy instruments requiring larger-diameter protection. The ventilation pattern supports efficient steam penetration, and the 70-per-package configuration suits high-volume endoscopic and minimally-invasive case preparation. Autoclavable polymer resists thermal degradation.
These black web guards at 63.5 × 76.2mm protect rigid scope tips during transport and sterilization, fitting over the distal segment of standard rigid endoscopes. The web profile holds the scope tip away from adjacent items, preserving optical face integrity.
Web guards provide protective shielding for the tips of rigid endoscopes during instrument setup and transit. The 19.1 × 76.2mm blue silicone guard fits standard rigid scopes, preventing accidental contact damage while maintaining field visibility. Reusable format supports repeated sterilization cycles.
Our sales specialists are available Monday through Friday, 9am to 5pm EST.